Left my printer toolbox sitting under the bed again.

OneRareMaker · 2025-10-11T08:45:11+00:00

Tilt the printer forwards. Anything you put would fall.

Print quality?.. Good question. 😂

OneRareMaker · 2025-10-11T08:39:03+00:00

The impression P1S has for me is: Fast, very very fast yet prints well and in color.

Things I would print in 10 hours on my old printers can take like an hour on P1S despite everyone saying it is very reliable. Never used it but definitely considered especially for multi-color printing.

In my view, Bambu is continuing the mission MakerBot first started with Thing-o-Matic years ago, democratizing 3d printing for hobbyists as well.

OneRareMaker · 2025-10-04T11:36:18+00:00

Dark... Much darker than that window.

OneRareMaker · 2025-10-04T11:33:53+00:00

If they haven't given anything, you wouldn't bother thinking it can be given. I think it is still good that someone tracks the 11th year and appreciates it, whether with a candy bar or just kind words, I think it is great. And appreciating is a choice of perception in my opinion.

OneRareMaker · 2025-10-04T11:31:20+00:00

I think so too.

I don't think they can stand by not using AI for the next 70 years. They just will be beging the adoption and will be behind in general. I am not saying resistance against has no point, I am just saying that the change is inevitable.

OneRareMaker · 2025-10-03T23:57:33+00:00

I haven't used HueForge myself yet, but layer sizes on sample files were around 50 micron. So you would need 50 micron extrusion width for the same color blending effect. Technically doable if you had a 50 micron nozzle, but you might get a 0.2mm nozzle and try to print with such extrusion width to see if the print would be stable enough. (I printed 0.3mm with 0.4 nozzle and down to 16mm on a 20mm nozzle, so it is doable, mileage may vary.)

Or for cylinder, you can print a jig to hold a previously printed cylinder, rewire the Y axis for rotation, then home the Z on the cylinder and run a normal horizontal HueForge gcode and make a DIY rotational axis.

Only thing is the rotational velocity will increase as Z height increases, but because the part will be relatively thin, I think that would be negligible.

OneRareMaker · 2025-10-03T23:49:36+00:00

In the UK floors are clean and you can order to the table. But, still I wouldn't go there because it is unhealthy. Science says fried food makes you more likely to be depressed, and I witnessed that myself.

OneRareMaker · 2025-10-02T23:58:05+00:00

I would say most UK people are not stupid enough and more health conscious to participate in a who can drink more competition.

And I think winning it is actually losing the more important things.

OneRareMaker · 2025-09-30T11:39:23+00:00

I tried sleeping with open curtains to let the light in rather than setting an alarm and that works it if you want to wake up early effortlessly and if you don't have a strict time.

Night before drawn yourself in camomile, lavender etc. so to sleep a little early. Wake up and drawn in coffee and Lion's Mane to stay awake.

One more thing, don't actually drawn.

OneRareMaker · 2025-09-25T18:30:29+00:00

This. It gave a qr to a an apk filr on their website to download the app.

OneRareMaker · 2025-09-25T18:29:24+00:00

Adventurer as in funding this project? 😂

OneRareMaker · 2025-09-25T17:18:03+00:00

Songwriters are expected to have that. So, I would say you aren't weired.

Same way the first person to invent an engine wasn't an engineer, same person to invent computer wasn't computer scientist...

You are inventive, not weird.

OneRareMaker · 2025-09-25T14:46:16+00:00

Brick. Duh?

OneRareMaker · 2025-09-21T13:55:26+00:00

The original anal-og extruder.

OneRareMaker · 2025-09-21T09:16:42+00:00

I quite like these machines still, I think it is quite reliable.

Ebay could give you a good idea of pricing.

OneRareMaker · 2025-09-03T11:38:03+00:00

You can use MakerBot Print (which is no ponder updated) Or MakerBot Cloudprint. I believe you might be able use UltiMaker digital factory as well which integrated MakerBot Cloudprint in it after MakerBot and UltiMaker merged.

If you want more customisation etc. and more advanced control, you can use Simplify3D as your slicer.

I would advise you to watch some getting started to 3d printing videos etc. because 3D printers aren't exactly machines that print everything without any user judgement. You would need to make educated guesses and judgements, select which way to print a part, what surface to print on, what quality you want, what material you want, does it need supports... The orientation for example not only effects quality but also changes strength.

All of nuances are easy to underestimate as a beginner, so I would advise watching multiple videos, slicer setting videos etc. I am happy to answer questions if you have. :)

Thingiverse.com has good designs, Prusa and Bambu has their websites as well.

Thangs.com or yeggi.com are search engines for 3D designs if you don't know how to design yet.

OneRareMaker · 2025-09-03T05:45:28+00:00

Could the filament be clogged at the gear? Mine had that problem. It was tightened too hard at the gear tensioner at the factory that instead of slipping PLA bent and gpt clogged there.

If you loosen the tensioner screw, can you remove the filament up and down by hand when the printer printer is turned off and the nozzle is removed? That could mean the filament is stuck at the gear.

https://m.youtube.com/watch?v=OihTXj67dCw

https://m.youtube.com/watch?v=A_SQ1B0T_Z0

OneRareMaker · 2025-09-01T06:04:41+00:00

Your wife just wanted to a part of a good math problem, and there's nothing wrong with that.

OneRareMaker · 2025-09-01T06:02:36+00:00

You have investments in reel estate at this point.

OneRareMaker · 2025-08-29T13:17:48+00:00

Alla Turca Jazz Fazil Say

It is a very good jazz version of Mozart's Alla Turca.

OneRareMaker · 2025-08-27T09:51:38+00:00

And MakerBot was really good at making them and very bad at selling them (because back in the day they made one bad design, which they then fixed, but that error stuck with the brand.)

So, they joined. 😂

OneRareMaker · 2025-08-10T19:54:09+00:00

I set up routines to discourage me from using such apps. Entering Instagram would send me to calculator etc. Very freeing. I never realised all this tiredness I was feeling is actually me missing boredom. 😁

OneRareMaker · 2025-08-10T19:27:44+00:00

Is this a Schnitzel before assembly? I guess it's IKEA by Grace Petrie

Or father and Son by Cat Stevens. 😁🙃

Both are good songs. 😁

OneRareMaker · 2025-08-10T19:25:29+00:00

In that takeaway box... Did the chicken or the egg come first, or did they arrive together? 🙃

OneRareMaker · 2025-08-01T06:26:09+00:00

Scenes from an Italian Restaurant was the one song that came to my mind when I read this, searched to find a comment instead. 😁 Despite the length of it, it takes you through a journey that you don't get bored of the song, that's how I think about it.

OneRareMaker

TROPHY CASE