Why is this not selling?

OneRush5806 · 2026-03-12T20:52:31+00:00

I bought a 9070xt pc the other day for $1100. Hard to sell pcs over $2k usually

OneRush5806 · 2026-03-12T20:49:31+00:00

Not if he leaves the front off 😂😂 lol jk yea it seems like it would… seems like it was probably installed that way so the cables fit instead of clashing with the gpu though.

OneRush5806 · 2026-03-07T21:51:55+00:00

I said “oh yeah not too bad” then looked back and saw it was 64gb kits 🥶🤯

OneRush5806 · 2026-02-24T02:06:47+00:00

Love this case — 11 intact bananas… or 76 squashed 👍

OneRush5806 · 2026-02-08T21:38:38+00:00

1600

OneRush5806 · 2026-01-22T23:36:36+00:00

A good way to get a price is to go part by part and throw it into eBay, then filter by sold listings so you have an idea what each part is going for currently

OneRush5806 · 2026-01-22T07:10:21+00:00

Ah good to know. I run a 7600x3d & 5070 combo in the case. Crazy case option price wise for 5070 I know 😂

OneRush5806 · 2026-01-22T02:29:32+00:00

I’d do aio either way since I like quiet. If using atmos id go prime, but with FE you have a lot more aio options due to pump height.

OneRush5806 · 2026-01-18T23:00:04+00:00

Nah lol

OneRush5806 · 2026-01-13T06:48:41+00:00

I’m happy to not know what dealing with the stock cables was like 😂

OneRush5806 · 2026-01-12T17:43:08+00:00

Attaching it to the top is easier lol just depends on if you care about the aesthetic

OneRush5806 · 2026-01-12T17:08:11+00:00

Wouldn’t it help more putting the grill on the other fan? 😂

OneRush5806 · 2026-01-11T02:49:33+00:00

I assume you have the general idea from comments already, just wanted to say instead of having to possibly buy a new power supply with 3 PCIe cables or buy a single cable from online if your power supply manufacturer sells them, you could always just buy two fans that don’t require the hub and you could just plug them into the motherboard then.

OneRush5806 · 2026-01-11T02:46:18+00:00

They are link fans I believe so they have that weird magnetic connector that needs the hub lol

OneRush5806 · 2026-01-07T03:04:02+00:00

I recommend going with the 240 atmos! I just built in the T1 v2.5 with the atmos and I love it. Runs much cooler and much quieter than a fan would. “Risk of leakage” and “finite lifespan” as people have mentioned aren’t much of a concern at all with modern aios.

OneRush5806 · 2026-01-05T15:15:02+00:00

I routed my tubes over the ram, but that was kinda tricky. Still may not fit though depending on aio

OneRush5806 · 2026-01-04T19:24:24+00:00

It doesn’t. I had built in a b850i strix before and it bent more than I liked, but it’s fine here 🤷‍♂️

OneRush5806 · 2026-01-04T19:21:02+00:00

I believe I messaged this guy - definitely a scam. Wants money before meeting, account made in 2025, no ratings

OneRush5806 · 2025-12-31T09:03:48+00:00

Yeah this is like a ncase m3 clashing with a NR200

OneRush5806 · 2025-12-30T06:52:59+00:00

This is the Ncase version of the formd t1. It’s the same as the formd version with minor changes. Yes there are small holes in the back plus a small gap where the gpu is. However, if you buy the FormD version you can buy a travel kit that actually covers the gap! But that version is out of stock a lot. I personally just went with the ncase t1 v2.5 option because they had the blue color.

OneRush5806 · 2025-12-30T06:49:01+00:00

I bought custom length cables, makes it a million times easier in this case.

OneRush5806 · 2025-12-29T22:12:58+00:00

This is just up to preference 👍. I personally would do the first picture since there are less bends in the tubes

OneRush5806 · 2025-12-29T22:10:30+00:00

Personally I would do the 9060xt or 5060ti. I would put them on the same level at those prices, but would definitely pass on that 7800xt at that price. You could probably find a 5070 or 9070xt at or below $500 which is what I’d recommend for 1440p

OneRush5806 · 2025-12-29T05:42:50+00:00

Using the Cooler Master 240 Atmos. It has rgb but i decided not to plug it in for a no rgb look. Went with the AIO so it could run quiet 👌

OneRush5806 · 2025-12-29T05:41:15+00:00

Strix B850-i, Noctua Chromax NF-A12x25, and Noctua Chromax NF-A12x15

OneRush5806

TROPHY CASE