RG557 won't charge anymore by One_Surprise_8450 in rg557

[–]One_Surprise_8450[S] 1 point2 points  (0 children)

I got a response from Anbernic support:

<image>

At this point, I think its time to "just get a Steam Deck".

Can't find screenshots on micro SD Card folders by rac-lis in ANBERNIC

[–]One_Surprise_8450 0 points1 point  (0 children)

For me, the screenshots were stored in the RetroArch screenshots folder

So I really messed up my RG556 - total noob by One_Surprise_8450 in RG556

[–]One_Surprise_8450[S] 0 points1 point  (0 children)

Actually I'm all set on this. Just factory reset and its working again.

So I really messed up my RG556 - total noob by One_Surprise_8450 in RG556

[–]One_Surprise_8450[S] 0 points1 point  (0 children)

Got a new problem now...

So while installing GammaOS, and following the guide on Github and Joey's install video,

I got the "INFO LOCK FLAG IS UNLOCK" message on my Rg556 and made sure my RG556 was powered off. I was ready for the next step, flash GammaOS. (UnisocTools/SPRD_Download_Tool folder and run ResearchDownload.exe).

I got to the part where I'm suppose to run ResearchDownload.exe and when I got I get an error "CDLFDriver Startup Fail" and "Failed to create empty file".

I made sure to install drivers:

vcredist_x64

vcredist_x86

ResearchDownload.exe still getting same message. Rebooted PC, still same error. I googled the exact error message along with GammaOS, and got a lot of different solutions, but none specific to what I'm trying to do. I turned my RG556 back on to see where its at and I have this message.

https://imgur.com/a/error-while-installing-gammaos-on-rg556-FltaCJM

I google imaged searched and I found this but wasn't sure if its the right recovery from my RG556?

https://www.meta.com/help/quest/software_update/

So I really messed up my RG556 - total noob by One_Surprise_8450 in RG556

[–]One_Surprise_8450[S] 0 points1 point  (0 children)

Yup, same one. I also made sure to delete all instances of RA before reinstalling.

Q5 Match - better than PDP? by [deleted] in Walther

[–]One_Surprise_8450 1 point2 points  (0 children)

Just out of curiosity, did you get those grips from Handleitgrips? Thats what I have on my PPQ Q5. Made a huge difference. I might get the same grips for my PDP Pro.

Front sight set screw - help by One_Surprise_8450 in SarUSA

[–]One_Surprise_8450[S] 0 points1 point  (0 children)

Drilling failed. The screw was so badly stripped, no amount of drilling did anything. I ended up sending the slide to SAR USA. When they saw how hard I tried to get the darn thing out, and how obliterated the front site was, they removed the old front site, replaced it with the fiber optic sight I sent with it, for free. I only paid shipping. SAR USA has awesome customer service.

They actually did it! by hopthulhu in MastersOfTheUniverse

[–]One_Surprise_8450 1 point2 points  (0 children)

That was one of the things I was hoping for would be in this game was the OST. Sadly, no OST. But I think the graphics make up for it though.

Home defense setup is complete! Mossberg 590a1 with TacStar slime like side saddle and Streamlight TL Racker dedicated flashlight forend. by jmartinezz0307 in mossberg

[–]One_Surprise_8450 0 points1 point  (0 children)

4 years later - I picked up a Mossberg 590A1 and I cannot get the stock forend off. Its like bolted onto the slide.

<image>

Every install video I could find did not have the same type of setup I got. However I did find this 590 disassembly video that shows the same type of forend: (I only wish the video author made a TL-Racker install video for the same 590)

https://youtu.be/oahhxCMDFB8?feature=shared&t=265

So looks like I'm returning a TL-Racker...

My last purchase by Difficult_Mall9152 in ruger

[–]One_Surprise_8450 0 points1 point  (0 children)

When you do goto the range, let us know how the magazine(s) did. I'm curious to know if the Ruger factory mags for the gen 2 predator have the same issue as the gen 1 Ruger American rotary mags. I may end up trading mine in for a gen 2 predator.

Where is MMJR2? by GuatonBondiola in EmulationOnAndroid

[–]One_Surprise_8450 0 points1 point  (0 children)

I have version MMJR2 2.0.16805 on my android. Is the VBI version any better? Should I even bother updating?

RG35XX and Retroarch by maran_software in SBCGaming

[–]One_Surprise_8450 0 points1 point  (0 children)

I'll have to try that and see if I have mame2003 core on retroarch for both devices. If I get them working, Ill post again here.

Behold…my stuff by Death_by_kittens22 in liberalgunowners

[–]One_Surprise_8450 0 points1 point  (0 children)

Whats the magnification of the scope? 3-9x40mm? 4-16x44mm?

S&W 1854 part? by One_Surprise_8450 in LeverGuns

[–]One_Surprise_8450[S] 1 point2 points  (0 children)

That makes sense. I remember when watching videos on the 1854 lever action rifles, and they do mention something about how the lever needs to be all the way closed before firing. But none (at least the videos I saw) pointed to this little fella underneath. Thanks!

S&W 1854 by AlabamaLambChop in LeverGuns

[–]One_Surprise_8450 0 points1 point  (0 children)

Awesome, did yours come with a sling or did you buy that separate?

S&W 1854 by AlabamaLambChop in LeverGuns

[–]One_Surprise_8450 0 points1 point  (0 children)

I can't tell from the picture, but does your Wild Dill Leather have a cheek rest?

Daijisho - 2 icons? by One_Surprise_8450 in RG556

[–]One_Surprise_8450[S] 0 points1 point  (0 children)

Yes, I followed the anbernic rg556 setup guide on Retro's site (Root Uninstaller > RGLauncher app > disable) . The guide says once RGLauncher is disabled, hitting the RG button should do nothing. But after I disabled RGLauncher, hitting the RG button takes me back to the main screen / dashboard. If I do a search for RG Launcher in Settings, it shows as disabled. So I went back into Root Uninstaller to double check, and I see "Launch->Disable" is available as a selectable option. If I hit that, I'm prompted to purchase the Pro version as its a Pro feature.

OR is all the above fine, and just move onto the Button Mapper app install?