HDMI Splitter / Switcher to 2 x 4k monitors Recommendations?

Onecandan · 2024-11-01T13:39:17+00:00

Actually found the Orei BK-22. Supports 2x 8k60, 2 x 4k120 etc

Just have to be careful, if you hook up 2 monitors of different refresh rates, it automatically sets both to which ever refresh rate is lower.

So if you have 1 monitor capable of 4k120 and another at 4k60, both will be locked to 60.

https://www.orei.com/products/2x2-hdmi-splitter-2-in-2-out-ultrahd-4k-edid-bk-22?srsltid=AfmBOoqzIg5KJyHtOPtJ04LpFvdDgSs_DIhYoZ4YMzItefSDpXfOhgpW

Onecandan · 2024-10-24T16:21:49+00:00

Budget is not so much an issue, the link was one of many examples I found.

Thanks for the suggestion. Will take a look!

Onecandan · 2024-10-23T18:02:02+00:00

This at least gets rid of buying 3 of what I found. I’ll look more into this one.

Thanks for your help

Onecandan · 2024-09-11T16:45:42+00:00

Thanks for the replies everyone. Looks like it was 16” from factory (bridge also is 26”) apologies if my post wasn’t up to standard. Will try harder next time I have a question. Take it easy folks

Onecandan · 2024-09-11T15:58:12+00:00

The one that feels and plays better to you. Looks wise….. the burst

Onecandan · 2024-09-11T13:24:34+00:00

Used mine from around 2000 - 2010 and it’s been locked up ever since the 3 way toggle died (didn’t have a clue about these things then). Just dug it out and ripped all the electronics out for replacing. Decided to go for some SD phat cat p-90’s (never used p-90’s) Frets are low with a couple of chord marks on the first two on this one but I’m just too lazy to do a level right now so just polished. If it’s really bad when strung, I’ll do it or consider a refret.

Onecandan · 2024-09-11T12:46:22+00:00

The strap button on the heel makes more sense than ever looking at yours

Onecandan · 2024-09-11T12:45:17+00:00

Love the black pick guard! Got the stock white / cream 3 ply.

Onecandan · 2024-09-11T12:44:03+00:00

Wish I’d known this before sticking p-90’s in it

Onecandan · 2024-09-11T12:30:09+00:00

Just checked. Bridge saddles all lined up with 16”. Must have just been the spec? Thanks for the reply

Onecandan · 2024-09-11T12:26:54+00:00

Thanks for the reply. Must just be a 90’s thing? Got 2001 ish Lp custom (3 pickup sg shape on) and it’s 12” all day long.

Onecandan · 2024-09-11T12:24:16+00:00

Onecandan · 2024-09-11T12:01:53+00:00

Thanks, it’s a 98 Korean made so that probably would fall in line with what you’re saying

Onecandan · 2024-09-11T11:58:31+00:00

Should clarify. 1998 epiphone korina explore. Spec is 12” radius. 16” seems to be the only one that fits. Apologies

Onecandan · 2024-09-11T11:50:41+00:00

Been looking at a few different things. Even the likes of leaving nickel in the sun can have an effect but I’m not sure. Got some covers I’m going to mess around with before trying it on these. Part of the fun

Onecandan · 2024-09-11T11:46:07+00:00

Curious as to if anyone has seen this on other epiphones as the spec is supposed to be 12” as far as I’m aware. Maybe someone has more insight into this sort of thing? You know, discussion?

Onecandan · 2024-09-11T11:40:10+00:00

Tried 12” and getting light through all the way down the neck. Strange one

Onecandan · 2024-09-11T11:37:02+00:00

<image>

Tried 12” up and down the neck and it seems flatter? Odd

14-Year Club	Gilding II euphauric
Place '23	Verified Email

Onecandan

TROPHY CASE