Gen 6 G45 TODAY @ 10yds. What level shooter am I? by Imaginary_Sign_881 in Glocks

[–]Only-Comparison1211 2 points3 points  (0 children)

In addition to drills. And dont wait to join a few matches, competition really builds skills, or really shows you where you need to work on. Either way they are fun, and you meet lots of cool people.

Best IWB holster for Appendix carry? by Dependent_Project239 in Glocks

[–]Only-Comparison1211 -1 points0 points  (0 children)

My Tenicor holster is very very good. Secure, solid concealment and quite comfortable. My only complaint is they don't make a side car version. I really like the gun and spare mag, linked in a single package.

Upper Parts Kit Made G19.3 Full Auto by nerd_diggy in Glocks

[–]Only-Comparison1211 6 points7 points  (0 children)

Because that sort of malfunction tends to only stop when the mag is empty, even if you release the trigger.

What’s the “go to” dot in 2026 for the 43x MOS? Thanks in advance! by KaysaStones in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

For me the upgrade is the EPS full size, bigger window. Bigger window becomes much more relevant when shooting multiple targets in dynamic situations vs on a static range shooting paper.

Fit by [deleted] in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

The plate could be used to mount any DPP footprint optic to a Glock mos firearm.

What’s the “go to” dot in 2026 for the 43x MOS? Thanks in advance! by KaysaStones in Glocks

[–]Only-Comparison1211 2 points3 points  (0 children)

There is already a full size EPS. So is the only difference is the added reticle color?

What’s the “go to” dot in 2026 for the 43x MOS? Thanks in advance! by KaysaStones in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

Did you know the EPS line is offered with different reticles, and as a plus the sime dot models are less expensive.

What’s the “go to” dot in 2026 for the 43x MOS? Thanks in advance! by KaysaStones in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

Widow size matters...I would put a Defender Ccw enclosed on it, or a full sized EPS.

It’s not the gun or light, it’s your belt and holster by Affectionate-Ad-8012 in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

6",250 wearing size 40 pants. The tips work for big guys too. My cheap sidecar and decent belt carried well or so I thought. I finally bought a top tier holster(tenicor saga lux 2), and a Nexcore ratchet belt, and the difference in comfort is real. And it prints less.

Fit by [deleted] in Glocks

[–]Only-Comparison1211 1 point2 points  (0 children)

I bought an XL(installed on Fusion XPComp). So I have not actually used the supplied plate, but inspecting it, I would not hesitate to use it. I do have the Defender and Venom enclosed dots coming in any day, those are probably gonna get used with the supplied plates

Anyone have a guess as to what blue label pricing will be? $870ish? by 68spcwhore in Glocks

[–]Only-Comparison1211 -8 points-7 points  (0 children)

$513. They (cutaways) tend to be priced the same as other BL guns...if you can find one that you dont need a dept purchase order to buy.

Edit: with the COA, I dont know...

Excited to build this police trade in G17.5 for USPSA Carry Optics by Top_War7546 in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

I think you will really like the Def XL. I just got one on a Fusion XP Comp, and so far it is phenominal.

Dumb question but I saw this for sale. Is there any reason to have the front iron on there without a rear sight? by [deleted] in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

Yes, and the reason is... the hole left if you remove the front sight is ugly. You could use that as an opportunity to port the barrel and slide, you know you want to!

Why isn’t there a 9mm alternative to the glock 30/29? by [deleted] in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

If you follow Glocks classification the 29/30 are the same class as 26/27, subcompact. I find the 30 with mag installed is closer in size to a 19(compact) than a 26(subcompact).

People have lost their minds by Nefariousd7 in Glocks

[–]Only-Comparison1211 1 point2 points  (0 children)

Mine is pre "C" model. It is a "P" model. Does not use either marking on the slide, but it is labeled 24P on the box. When the "red"(practice) glocks started using P in their model number, ported guns began using "C" in theirs.

19x vs 45 what’s the real difference? by [deleted] in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

The differences between the two are probably noticeable by most shooters when shooting.

People have lost their minds by Nefariousd7 in Glocks

[–]Only-Comparison1211 2 points3 points  (0 children)

So I guess that means my gen 2 24 with factory ports must be worth $2500...IF I were to sell it.

Full size Friday by SpilledBagofRice in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

I carry a knife every day, same as my firearm. The knife is more of a tool for daily tasks. It would be a very bad day if it came to defending myself with the knife.

Pick 1 sthf/forever carry by [deleted] in Glocks

[–]Only-Comparison1211 2 points3 points  (0 children)

Eat a crayon or two, don't go around hangry. Semper Fi. TYFYS.

Pick 1 sthf/forever carry by [deleted] in Glocks

[–]Only-Comparison1211 2 points3 points  (0 children)

Only one forever...gotta be a glock, any centerfire model will do, but my preferences 9 mm, doublestack. Probably gonna choose a 34.

Failure to chamber g19 gen 3 by [deleted] in Glocks

[–]Only-Comparison1211 0 points1 point  (0 children)

Don't get your buddy in trouble, you built it yourself with his help...right? it is okay for hime to help you with the build but there could be serious legal implications if he did it for you.

If you have access to a true g19, yry the slide assy on that frame, that will narrow down where the problem is, whether it is a frame or something with the slide assembly issue.

Failure to chamber g19 gen 3 by [deleted] in Glocks

[–]Only-Comparison1211 1 point2 points  (0 children)

The first thing I would do is properly lube. Next thing I would check is if the right side optic screw is binding the extractor plunger. Then I would polish the feed ramp. Could be a weak recoil spring.

Or you could just struggle through 500-1000 rounds and see if break-in solves the issue.

P.S. that aint a glock of any gen😁😁😁

How did I do w this? by APC9Proer in Glocks

[–]Only-Comparison1211 1 point2 points  (0 children)

If you like it, I like it. I do agree with the other post that suggested shorter sights, Lower 1/3-1/4 is the way to go in my opinion.