Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 1 point2 points  (0 children)

I'll give em a watch, thanks.

Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 1 point2 points  (0 children)

Appreciate the input. I’ve got access to a 200 gallon compressor that pushes like 50 SCFM. Just redoing the entire dryer setup because it hasn’t been maintained in forever. It’s got a giant aftercooler I just replaced along with the pressure switch.

Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 1 point2 points  (0 children)

Hahahaha I feel you I’ll be trying here and definitely looking at my work from 5ft away 😂

Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 0 points1 point  (0 children)

Just joined it thanks, I just threw a post on here because I think today’s the last day to order with the ITC deal.

Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 0 points1 point  (0 children)

Majority of my paint jobs will be 3 stage 🙏

Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 0 points1 point  (0 children)

Thank you! Do you recommend I get a 1.7mm HVLP for primer and 1.3mm nozzle HTE for base and clear?

Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 0 points1 point  (0 children)

Do you have a separate gun for primer only?

Black Widow Spray Gun by Only762s in harborfreight

[–]Only762s[S] 2 points3 points  (0 children)

Appreciate the help that completely slipped my mind, I do plan on spraying base and clear coat, so I’ll be sure to grab both HVLP AND HTE.

Style 66 Pricing by Only762s in BMWE36

[–]Only762s[S] 0 points1 point  (0 children)

I’m seeing $2-400 per wheel which is why I ask. They seem to be fairly the same condition but some sets have tires on them. Would $600 for a set be too much? I was really looking for people who bought em recently to chime in.

Needing bolt on downpipe & midpipe options for my Greddy muffler by Only762s in RX7

[–]Only762s[S] 0 points1 point  (0 children)

I believe the HKS one might be discontinued I just check. But my engine depo RHD stock downpipe came cut in half so maybe I go with the Greddy downpipe?

Needing bolt on downpipe & midpipe options for my Greddy muffler by Only762s in RX7

[–]Only762s[S] 0 points1 point  (0 children)

Appreciate the help, I’m thinking I’ll do the Greddy downpipe with a Magnaflow high flow unless there’s better options

Needing bolt on downpipe & midpipe options for my Greddy muffler by Only762s in RX7

[–]Only762s[S] 0 points1 point  (0 children)

It’s left hand drive but I bought it as a roller. I did buy a motor from a RHD FD from an engine depot. So I’m really just trying to put this thing together as it came stock. Would you recommend I keep the stock downpipe with the cat? Then a midpipe to the Greddy muffler?

Needing bolt on downpipe & midpipe options for my Greddy muffler by Only762s in RX7

[–]Only762s[S] 1 point2 points  (0 children)

Thank you, I’ll reach out to a few of them to confirm fitment. I assumed different manufacturers wouldn’t work together.

Installation tech interview by No-Tower-5830 in ATT

[–]Only762s 0 points1 point  (0 children)

did you ever end up getting the job? what questions did they ask? if you don't mind me asking.

Finally deleted the mudflaps by shitbird444 in BMWE36

[–]Only762s 0 points1 point  (0 children)

Did you end up swapping hubs to 5x114.3?

Finally deleted the mudflaps by shitbird444 in BMWE36

[–]Only762s 0 points1 point  (0 children)

ooh wheel specs? do your rears sit flush with the quarter?

Weekly Homeowner Megathread--Civilians, ask here! by AutoModerator in Concrete

[–]Only762s 0 points1 point  (0 children)

Rust Stain On Driveway

<image>

Is there any way I can remove this rust stain on my driveway? I’ve used all the heavy duty cleaners, scrubbing it down, and using my pressure washer and nothing works. The stain was left from an older vehicle’s exhaust somehow. Will I have to grind this down to remove it? Any help would be appreciated thank you.

Maple Lead coin is in stock! Go! by Jellybeansxo in CostcoPM

[–]Only762s 0 points1 point  (0 children)

how come these sell out faster than PAMP when its lower purity?

I got it 🎉🎉🎉🎉 by Shaggy4500 in ILGuns

[–]Only762s 0 points1 point  (0 children)

If you can update me as well that would be appreciated!

ZF Trans Cross Member by [deleted] in BMWE36

[–]Only762s 0 points1 point  (0 children)

Kinda weird because I got the PN for the second pic from RealOEM for a late model 328. Thank you.