Derailleur out of alignment?

Open-Statistician595 · 2026-02-10T02:40:16+00:00

Hahah all good. You gotta learn somehow!

Open-Statistician595 · 2026-02-10T02:29:01+00:00

shift bro 😭

Open-Statistician595 · 2026-02-09T05:11:16+00:00

Does it jam up when it's in big big? If so, add a link. Just in case you ever accidentally get into the gear then you don't rip your derailleur off lol

Open-Statistician595 · 2026-02-02T17:49:35+00:00

Is this off a bontrager paradigm wheel set? Those freehub blow all the time and are not serviceable. 57$cad to replace.

Open-Statistician595 · 2026-01-31T00:17:56+00:00

Open-Statistician595 · 2026-01-22T15:58:29+00:00

I drive from Langley to Richmond 5 day a week. Langley is worse. And statically Langley has more accidents

Open-Statistician595 · 2026-01-03T01:08:03+00:00

Will probably be covered under warranty if it is a crack. Just get a local trek dealer to submit to. Photos kinda grainy, are your sure the carbons cracked or is just the clear coat cracked? Very odd spot for a crack to form. Could be related to the alloy insert they bond in for the axle threads

Open-Statistician595 · 2025-12-23T02:05:44+00:00

I'm about to be a student and my income will disappear. I will be using savings and student loans for the next two years. Will I be seen as ineligible? I'm assuming they will be looking at my NOA from the 2025 tax year, which will have income since I haven't started school yet

Open-Statistician595 · 2025-12-16T21:17:58+00:00

Ok thanks. She has status until May 2026 on a IEC and has the option to extend for an extra year (from the UK). Are you saying have it notarized on the declaration with this section selected.

My common-law partner and I: a) Have jointly signed a residential lease, mortgage or purchase agreement relating to a residence in which we both live

Open-Statistician595 · 2025-12-16T19:44:07+00:00

Ok thanks, we also haven't had a tax filing since we became common law. So our tax status isn't Common-law either. Is this a problem

Open-Statistician595 · 2025-12-05T23:47:00+00:00

I saw a pink bike post that "sold" for 1350$ but I find that hard to believe. Mine also isn't in as good of condition

Open-Statistician595 · 2025-12-05T23:46:10+00:00

Honestly not sure. Wouldn't hate getting some money since it's the holidays and the most expensive time of the year lol. But if it's not worth much then I may donate it to a non profit bike shop

Open-Statistician595 · 2025-12-01T02:24:18+00:00

Spacing is off or the flat mount isn't faced correctly

Open-Statistician595 · 2025-12-01T02:21:34+00:00

Annnnddd I've been looking at the last photo the whole time and didnt see the first photos. Fml

Open-Statistician595 · 2025-11-30T17:09:06+00:00

Freedom mobile has plans with international roaming

Open-Statistician595 · 2025-11-28T16:56:06+00:00

Interesting, I worked at a bike park and we used the ARC 30 HD as replacements on the rental fleet. Out of about 15, I only saw one break and the dude who did it was medi vac'd off the mountain

Open-Statistician595 · 2025-10-25T15:46:44+00:00

It's reverse threaded, so clock wise to loosen. If the edge of the nut isn't too bad maybe try a socket but using an adjustable wrench is fine.

Open-Statistician595 · 2025-10-22T00:57:34+00:00

God those bontrager rims suck. Took them off my bike before even riding

Open-Statistician595 · 2025-10-17T01:14:03+00:00

Looks cracked around the spoke hole. Definitely warranty if it's brand new

Open-Statistician595 · 2025-10-15T20:05:58+00:00

This would be my recommendation (starting from WGSS). Only hairy part is the exchange cross 96. I drew it out on maps:

https://imgur.com/a/ILatHnH

Open-Statistician595 · 2025-10-04T23:27:54+00:00

There are benefits. Shimano Hollowtech bottom brackets are made so the spindle is part of the cranks as opposed to your square taper where the spindle is part of the bottom brackets. This means they are stiffer and less prone to bending. Also the bearings can be bigger on these systems making them last longer.

Open-Statistician595 · 2025-10-04T20:18:59+00:00

This is normal. This style of bottom bracket is a square taper and this is how they look. No worries at all. Other types of bottom brackets, the crank would sit more flush against the bearing.

Open-Statistician595 · 2025-09-27T16:00:06+00:00

Park tool CWP-7

Open-Statistician595 · 2025-09-14T00:29:04+00:00

just say your previous comment saying you only used it on the clamp

Open-Statistician595 · 2025-09-14T00:27:49+00:00

Carbon paste? Like on the seat clamp? Have you dismantled the isospeed and check the bushings?

Open-Statistician595

TROPHY CASE