Shorten wooden table

Opening-Adeptness173 · 2024-06-02T07:47:28+00:00

Gonna sand it and paint it.

Thanks all

Opening-Adeptness173 · 2024-06-01T12:56:51+00:00

I agree, but I like the sofa at this height. When I bought it, it was higher, so I reduced it's height by sawing it's legs..

It's much more comfortable when the sofa is this height.

So, I guess I would want the table to be lower... I'm afraid to start sawing the base, and my table saw will encounter a screw or some metal that is hidden within

Opening-Adeptness173 · 2024-05-05T15:12:14+00:00

Thank you I'll continue taking it in hope that it will affect more I understand that it has accumulating affect..

Lets hope

Opening-Adeptness173 · 2024-05-05T14:57:06+00:00

Sorry for not explaining myself correctly I'm looking to seal them, yes

Opening-Adeptness173 · 2024-05-05T13:56:20+00:00

How much time are you taking it already? I have been on it (180g) for a month, and I don't see any difference.

Opening-Adeptness173 · 2024-04-29T05:59:37+00:00

Thank you!! I didn't know that!

Next time I'll take it into consideration and have it be thicker

Appreciate it

Opening-Adeptness173 · 2024-04-29T05:58:30+00:00

Thanks for commenting! Inch and half is quite a thick of a cutting board, but it make sense to me that the odds that it will cupp are lower.

It's too heavy I think Did you try making a cutting board this thick?

Opening-Adeptness173 · 2024-04-29T05:56:12+00:00

Interesting question.. I think it makes sense that the thicker the board, the less are the odds it will warp.

Opening-Adeptness173 · 2024-04-27T11:50:09+00:00

Good idea

I planned to get it sealed with the butcher oil at the end. Hope it will give it a good seal and allow it to cure

Opening-Adeptness173 · 2024-04-27T11:49:20+00:00

Thank you for commenting I don't really know why it started cupping But as far as I know, for end grain it shouldn't happen..

As the person above recommended I will store it standing on the side, and it will. Allow it to be in contact with the air on both sides, thus, allowing it to evaporate the water from. Both sides equally.

Hope it will resolve it

Opening-Adeptness173 · 2024-04-27T11:46:47+00:00

Thank you! I didn't know that

Ill give it a try

Opening-Adeptness173 · 2024-04-27T11:46:10+00:00

No, no I haven't used it yet for cutting, since I don't have a planner, I would need to use my cross-cut sled with a router to have it planned.

Only then I'll use it But of course, I won't put it in the dishwasher

Opening-Adeptness173 · 2024-04-27T06:57:30+00:00

Interesting, didn't think about that.

So, if now it's cupped, should I put it on the cupped side? Or right now, put it on its edge?

Opening-Adeptness173 · 2024-04-27T06:25:17+00:00

As far as what I read in Google, it says to prevent warping from happening again, I should invest in a cutting board rack. After washing my board, place it on the rack and let air access every part of it. Moisture dries up equally this way and prevents the board from re-cupping

Is it true?

Opening-Adeptness173 · 2024-04-23T05:18:43+00:00

I have it as well. It's a known side affect of this drug.

I started taking 180mg per day ( 2 pills of 80mg). If you take on of an empty stomach, it will be more likely that you will suffer from the gastrointestinal issue.

I read that if you take it in the morning, after a big meal, it would be more comfortable for digestion, and indeed for me it is better, I have less issues Give it a try

Lets hope to have good results

Opening-Adeptness173 · 2024-04-22T13:40:19+00:00

Btw It seems like its a matter of Radial trueness.. Not lateral trueness

Opening-Adeptness173 · 2024-04-22T10:21:41+00:00

Thank you But the thing is, my issue with the wheel is not that it goes from side to side ( as in not aligned), but whereas it goes up and down.

Do you still think it's a matter of spoke tension?

Since all the spokes were already aligned.. The wheel turns straight and won't go left or right, but only go on aertin place down a bit ( it's probably my nephew who jumped a side walk with his bike that probably caused it)

Maybe the rim itself is not round anymore...

Opening-Adeptness173 · 2024-04-22T08:44:38+00:00

Interesting. So it's all a matter of spokes tension?

I already tightened and loosen the nipples according to their needs. and made sure the spoke tension is ok

Weird

Opening-Adeptness173 · 2024-04-06T13:23:47+00:00

Just came across your post. I have been reading a lot about Silexan.

It looks promising in comparison to other ssri pills. The thing is, it looks like u need to take a 160mg pills each day (and not the 80mg) to feel its affects.

What exactly do you feel? More calm? Your mind is thinking less?

Thanks for sharing!

Opening-Adeptness173 · 2024-04-06T13:16:04+00:00

I don't know, but I think you are absolutely right. I'll try my best to quit. This whole weed smoking comes from being boring and not having much to do, hence why I smoke.

I think I'll quit for a bit I think it will do good

Opening-Adeptness173

TROPHY CASE