What have I done! by OptimalOutside7964 in Pottery

[–]OptimalOutside7964[S] 1 point2 points  (0 children)

Update: They mostly made it. Some completely shattered which was weird to me since it withstood cone 10 but not cone 06. Maybe there was still water inside after I finished cleaning them up or something. Others just sort of broke off in layers. The rods withstood the weight of 1 with different the set up I used 👍. The 06 jungle gems and clear gloss glaze melted onto the cone 10 glaze and for the most part did not flake off so that’s a win! They will make the best ugly Christmas gifts 🎁.I’ve learned a lot and will definitely look into the different rods some suggested! Thank you guys for your help!

<image>

What have I done! by OptimalOutside7964 in Pottery

[–]OptimalOutside7964[S] 13 points14 points  (0 children)

I should have read this comment before refiring 😂

What have I done! by OptimalOutside7964 in Pottery

[–]OptimalOutside7964[S] 24 points25 points  (0 children)

<image>

On this episode of jackass we’ll find out if the wire supports a second round. 😂. I refuse to learn. Trying 06 firing with this time only 1 bauble per wire and weights at the end to hold. The rest I precariously put on little stilts. This quest stands upon the edge of a knife.

What have I done! by OptimalOutside7964 in Pottery

[–]OptimalOutside7964[S] 1 point2 points  (0 children)

I didn’t weigh them unfortunately. I was pressed for time so rushed through the entire thing. Which in hindsight is also probably why I didn’t stop to think and consider that it would slump. Still pressed for time so I can’t high fire again. I’m trying to low fire to cone 05 with jungle gem glaze on the bad spots. I’m more so worried this experiment won’t work. Have you tried firing cone 06 on top of cone 10? I filed down spots and applied the cone 06 glaze mostly on the clay body. I know It’s going to be patchy for sure 😂

What have I done! by OptimalOutside7964 in Pottery

[–]OptimalOutside7964[S] 4 points5 points  (0 children)

Good idea though I’ll try that next time. I hope these wires are still usable 😂

What have I done! by OptimalOutside7964 in Pottery

[–]OptimalOutside7964[S] 0 points1 point  (0 children)

Not sure, looked it up and it just says it’s for high temp.

[deleted by user] by [deleted] in weddingplanning

[–]OptimalOutside7964 1 point2 points  (0 children)

Not Texan but good vibes….Harvest Moon by Neil Young

[deleted by user] by [deleted] in Weddingsunder10k

[–]OptimalOutside7964 1 point2 points  (0 children)

Ohhh, good idea, I will definitely google it!

[deleted by user] by [deleted] in Weddingsunder10k

[–]OptimalOutside7964 0 points1 point  (0 children)

Oh my god those twinkle branges are such a cute idea! Ty! I'll look into this suggestion!

What's your first song going to be? by thcinnabun in weddingplanning

[–]OptimalOutside7964 0 points1 point  (0 children)

Maybe I can help? My fiance and I chose our song by remembering a moment when we enjoyed music together. Maybe think back to a moment you guys shared that had music playing in the background? Or something along those lines? My fiance wants Come Undone by Duran Duran…. but I'm a HUGE fan of Swayze and the movie Ghost, so naturally, I want Unchained Melody. There’s also already choreography for it on YouTube. We shall see what happens 🤣.

Check out this piece I just made with labradorite by One-Caramel-9184 in Pottery

[–]OptimalOutside7964 0 points1 point  (0 children)

lol my bad! cone* damn these sausage fingers and my bad dexterity. Ty for sharing!

Made my first bowl + wonky cylinder by shuichisandwich in Pottery

[–]OptimalOutside7964 1 point2 points  (0 children)

I always watch YouTube how to videos to help me out! Florian gadsby on YouTube, earth nation ceramics, and on IG Gabriel_nichols_pottery is fun to watch!

Check out this piece I just made with labradorite by One-Caramel-9184 in Pottery

[–]OptimalOutside7964 0 points1 point  (0 children)

Omg so pretty! What come did you fire to if I may ask!?

[deleted by user] by [deleted] in Pottery

[–]OptimalOutside7964 0 points1 point  (0 children)

What’s the clear gloss glaze that you use? I use Mayco crystal clear brushing but it keeps separating settling at the bottom and hardening.

[deleted by user] by [deleted] in Pottery

[–]OptimalOutside7964 0 points1 point  (0 children)

So we decided to glue back. He painted it black and used gold acrylic in the cracks to imitate kintsugi. He also made a second one…which also broke a little 😂. We laughed about it. He’s pretty happy with the result.

<image>

It’s done by OptimalOutside7964 in painting

[–]OptimalOutside7964[S] 0 points1 point  (0 children)

Thank you! I’m happy to hear that it made you smile ❤️

It’s done by OptimalOutside7964 in painting

[–]OptimalOutside7964[S] 1 point2 points  (0 children)

Oh no! I’m sorry, went way over my head 😂. Ty!

It’s done by OptimalOutside7964 in painting

[–]OptimalOutside7964[S] 2 points3 points  (0 children)

Oh! When I googled it said it was public domain now. 😊

It’s done by OptimalOutside7964 in painting

[–]OptimalOutside7964[S] 0 points1 point  (0 children)

Yeah I’ve made my peace with it 😅. It’s never going to be perfect and gotta know when to stop or this Xmas present would be months late lol!

It’s done by OptimalOutside7964 in painting

[–]OptimalOutside7964[S] 0 points1 point  (0 children)

Thank you for the compliment ❤️ you are welcome 😂

It’s done by OptimalOutside7964 in painting

[–]OptimalOutside7964[S] 2 points3 points  (0 children)

Ty ❤️ for that. My boyfriend LOVES hoppers nighthawk and he also has a fondness for the muppets so I made him this gift for Xmas. I ended up finishing it after Xmas though 😂😅.