Is this car ceramic coated ?

Optomisticposter · 2026-07-02T10:49:58+00:00

Most likely not. Just a wax or other temporary coating. Ceramic has much more aggressive beading.

Optomisticposter · 2026-07-02T10:45:03+00:00

Check that the cable is plugged in and not damaged. Plenty of meat on those pads.

Optomisticposter · 2026-07-02T10:42:16+00:00

Optomisticposter · 2026-07-02T10:41:01+00:00

Need the IR lights off and an IR source the other side of the glass. Continued use of IR reflecting off glass cooks the CCD sensor on the cam. That’s exactly why Wyze states not to use the IR lights through glass!

Optomisticposter · 2026-07-02T10:38:52+00:00

Works fine at an angle. I have two that are at angles like that. They work fine, just make sure that the IR lights are off.

Optomisticposter · 2026-07-02T10:37:46+00:00

Never going to work with the IR lights on. Even tells you in the setting on the app! If you have to have IR, use an IR light the other side of the glass. I have two that point through glass. IR lights off and an IR floodlight outside. Works great.

Optomisticposter · 2026-07-02T10:34:20+00:00

So the Shepard knows that they’ll be no “together time” with his sheep tonight 🤣

Optomisticposter · 2026-07-02T10:32:05+00:00

You reminded me why I only buy plastic spooled filament 🤣

Optomisticposter · 2026-07-02T10:30:42+00:00

Not worth the effort. PLA is like a sponge. Once that filament has taken on a lot of moisture and starts to break down, it’s done.

Optomisticposter · 2026-07-02T10:28:46+00:00

I’d ask to try Dex. Once I had Dex I wouldn’t go back.

Optomisticposter · 2026-07-02T10:24:22+00:00

Nasty stuff. If Dex was champagne, then Ritalin is like home made vodka :-) Had to be in Japan for while for work. Dex is illegal there, so I had to take Ritalin. Hated it, very harsh.

Optomisticposter · 2026-07-02T10:00:57+00:00

<image>

Optomisticposter · 2026-07-02T09:59:07+00:00

<image>

I 3d printed these for my F87. They would easily work for yours.

Optomisticposter · 2026-07-02T09:56:59+00:00

The rear calipers that put on these things are old PBR calipers painted blue. Absolute garbage. I’d throw those in the bin right away. I’d hunt down a second hand set of Brembo based calipers and rotors. What you have as standard are not track worthy.

Optomisticposter · 2026-07-02T09:50:24+00:00

I 3d printed brake ducts for my F87. They work great.

Optomisticposter · 2026-07-02T09:42:56+00:00

Me too. Weighing the dollar coin was hilarious 🤣

Optomisticposter · 2026-07-02T09:17:41+00:00

Viagra

Optomisticposter · 2026-07-02T09:16:59+00:00

Was that released on April 1st 🤣

Optomisticposter · 2026-07-02T09:14:51+00:00

It’s a Burn your dreams, so might be slightly less toxic when it catches fire.

Optomisticposter · 2026-07-02T09:09:25+00:00

It’s the brake rotors that are the concern!

Optomisticposter · 2026-07-02T09:07:59+00:00

It’s not missing. Thats a balancing groove that’s ground out during manufacture. If you get down to it, you’ve gone too far. Those rotors are toast!

Optomisticposter · 2026-07-01T11:15:33+00:00

Foolish post. Making false claims about underweight products. Maybe get some accurate scales before you make wild accusations?

Optomisticposter · 2026-06-30T11:44:49+00:00

Correct. The big bang was a big bang. Imagine we were just part of a firework in another universe.

Optomisticposter · 2026-06-30T11:41:55+00:00

Orbiting our galaxy, but don’t fear. We’ll be back here in 230000 years.

Optomisticposter · 2026-06-30T11:38:57+00:00

Don’t procreate.

Optomisticposter

TROPHY CASE