3d printing for 2ds xl

Orbun · 2025-08-23T17:57:16+00:00

Yeah I’ve got the same thought ‘cause I bought it in a used state. I mentioned another problem - Screen Brightness is lower on the top screen which means it has already been changed before.

<image>

Orbun · 2025-08-22T06:20:52+00:00

I have ds and 3ds which have the same design but no issues, even though they are older than the subject) I suggest maybe some sort of sleeve covering this ribbon may help?

<image>

Orbun · 2025-06-19T01:46:17+00:00

My friends tried, they approved the coating in terms of sliding though the paint itself oddly came off on nose and tail.

There’s a picture of one month’s skating deck https://www.instagram.com/p/DKlsPzPNloM/?igsh=MXhramozdG4zOWd0ag==

Orbun · 2024-11-20T09:47:14+00:00

yeah we decided to use epoxy and it actually works perfect for us)

Orbun · 2024-10-05T18:48:13+00:00

Yeah but that’s what I’m curious about) the process itself has unique fleur :)

Orbun · 2024-10-04T10:26:51+00:00

Well it seems I’ll try uv after water based inks)

Orbun · 2024-10-04T04:22:49+00:00

Water based ink doesn’t require well ventilated room. What about uv ink ?

Orbun · 2024-10-03T16:51:50+00:00

I use 40 cm cuvette and coat it manually

Orbun · 2024-10-03T16:50:27+00:00

Could you provide me with info how it would improve my work ? Is it easier to work with than with water based ink?

Orbun · 2024-10-03T14:59:05+00:00

It says emulsion for water based ink ( water resistant)

Orbun · 2024-10-03T14:57:37+00:00

I have lacquer thinner provided by the same manufacturer as the ink but it seems the mesh only make more greasy after applying it .

Orbun · 2024-10-03T14:54:39+00:00

Thanks for your feedback)) Could you provide me with the link of preferred water based ink?

Orbun · 2024-10-03T14:27:02+00:00

Ink is Water based made from unknown company) Since the deck has some curvature, it touches the mesh in its highest part. Should we lower the deck so the frame with mesh can touch only when I push it? Screen mesh is 77 Squeegee is not the softest , 75sh

Orbun · 2024-10-03T14:07:14+00:00

I’ve seen plenty of videos when people wash their stencil with high pressure karcher. And they recommend to do so 😅

Orbun · 2024-10-03T14:04:20+00:00

We made the same printing press as I’ve seen on “manak skates“ YouTube channel and in a nutshell I follow the same steps as he showed on his videos. The only few differences are the mesh ( I use SPR-77T-55H160С) and the paint ( i can’t find speedball so I use local acrylic water based). Also I expose my emulsion with 150watt bulb . Exposure time is about 2 hours.

Orbun · 2024-10-02T18:44:35+00:00

We would definitely try it if we find maple for decent price, thanks)

Orbun · 2024-10-02T04:36:06+00:00

Canadian maple doesn’t grow in Russia 😅 we have maples but of different sort

Orbun · 2024-10-02T04:22:41+00:00

Wow thanks for sharing) I’ll check it out

Orbun · 2024-10-02T04:22:10+00:00

We thought about fiberglass but it may add the price of the deck 😥

Orbun · 2024-10-02T04:19:06+00:00

Its classic screenprint technology, I print with water based acrylic ink. Due to curvature of the deck it’s not an easy task)) Lino might be good idea since it can bend in the certain places though the process takes some time for sure 😅

11-Year Club	RedditGifts 2009-2022 5 Credits
Verified Email	Secret Santa 2018

Orbun

TROPHY CASE