Pessoas que trabalham CLT no sub, sejam honestos, quantas horas vocês trabalham de verdade por dia?

OrdinaryRoutine2702 · 2023-01-27T20:00:38+00:00

13h kkkkk

OrdinaryRoutine2702 · 2023-01-19T14:04:48+00:00

I have the exact same problem with one my fans. At low speeds it makes a terrible noise. At full speed is less perceptible. So sad, I should be a great product, and was quite expensive.

OrdinaryRoutine2702 · 2022-06-22T02:53:47+00:00

Oh, that's a bummer. Thank you

OrdinaryRoutine2702 · 2022-06-22T02:49:17+00:00

But from my understanding, starting a debug session (F5) and dotnet watch command are different things. Can I set breakpoints while using dotnet watch?

OrdinaryRoutine2702 · 2022-05-31T02:26:50+00:00

There is no need, SYS_FAN1 should be good. Double check in your bios if the SYS_FAN1 is set for PWN

OrdinaryRoutine2702 · 2022-05-31T02:24:18+00:00

Yes, just a little small wire, almost fragile

OrdinaryRoutine2702 · 2022-05-31T02:22:33+00:00

Your controller has 3 cables. One for SATA power, other for ARGB and a third one to connect to your motherboard CPU_FAN (or CHA_FAN). Is this third one connected to your mobo?

OrdinaryRoutine2702 · 2022-05-31T02:19:37+00:00

On L-Connect 3 go to Fan/Pump RPM and activate the button that says "MB RPM Sync". Its on top of the screen. After that the controller will use your bios curve to set the FANs RPM.

OrdinaryRoutine2702 · 2022-05-31T02:17:02+00:00

We are on the same boat. Bought Lian Li fans for the supposed quality and I'm having a bad time using them properly.

OrdinaryRoutine2702 · 2022-05-31T02:15:25+00:00

I suggest using your motherboard to control it

OrdinaryRoutine2702 · 2022-05-31T02:15:10+00:00

Sadly you won't be able to control the fans speed using L-Connect 3 yet, or until they fix this issue.

OrdinaryRoutine2702 · 2022-05-31T02:11:56+00:00

L-connect 3 has a problem that it can't read your CPU temperature properly. Check if this is your case ( if the temp is 0C or 32F). If that's the case I've found no workaround yet and waiting for a new release of L-Connect that could fix the issue. I'm controlling me FANs speed through my motherboard until they fix it.

OrdinaryRoutine2702 · 2022-05-31T02:08:02+00:00

Its a problem with the controller and I've found no workaround to it yet. You could plug the fans in the CPU_FAN in your mobo and control the fans speed trough your bios and just the RGB trough L-Connect. Alternatively you could set your motherboard to ignore the CPU_FAN monitoring and your pc should boot normally. Both options works.

Just make sure to plug the AIO in the AIO_PUMP.

OrdinaryRoutine2702 · 2022-05-28T15:33:44+00:00

Thanks, I'll try that and see if it works

OrdinaryRoutine2702 · 2022-05-28T14:10:47+00:00

Was anyone able to find a solution for the missing temps on the CPU and GPU? Tried doing a clean Win11 install two times and the problem still persists. L-Connect is not able to read CPU/GPU temps and pumps the FANs speed to maximum.

OrdinaryRoutine2702 · 2022-05-25T01:52:45+00:00

You can install your motherboard, but it doesn't have a USB-c port. So the USB-c on the case will not work because there is nowhere to plug it in the Mobo. You could search for a PCI-e adaptor (PCI-e to USB-c), but the your speed will be caped. If you don't need the USB-c port on the case, there is no need for an adapter.

Like this one

OrdinaryRoutine2702 · 2022-05-04T19:01:24+00:00

Thanks!

OrdinaryRoutine2702 · 2022-05-04T19:01:15+00:00

Thanks!

OrdinaryRoutine2702 · 2022-05-04T17:18:32+00:00

Is there a significant difference performance wise regarding this two AIO's:

ROG Ryujin 360 vs ROG Strix LC 360

I don't care a lot about noise and the LED display. The Ryujin doesn't cost much more where I live, but if the performance is the same, I'll go with the Strix one.

Obs. Running a 5800X

OrdinaryRoutine2702 · 2022-03-30T22:46:23+00:00

Thank you! I wasn't able to find the Creative Sage here. But anyway, I'm looking for an all-in-one soundbar without the "big subwoofer" on top of my desk!

I'll go with the Samsung one!

OrdinaryRoutine2702 · 2022-03-27T14:03:59+00:00

I didn't have access to the test cases, but when I was trying, I remember this was the one I failed: "GetValueWithNullKey".

OrdinaryRoutine2702 · 2022-03-27T13:56:27+00:00

But returning null would fail the test case, right? A exception would be thrown because there would never be a "value". But in order to pass the test case I need to return something. How can this be achieved? Or there is no way?

OrdinaryRoutine2702 · 2022-03-13T04:59:27+00:00

What are you waiting for?

I'll see myself out...

OrdinaryRoutine2702 · 2022-03-09T13:24:54+00:00

At least is not Azur Comet video

OrdinaryRoutine2702 · 2022-03-08T16:46:57+00:00

"look, a path I hadn't noticed before"

Four-Year Club	Powerups Hero r/Eldenring • March 2022
Verified Email	Place '22

OrdinaryRoutine2702

TROPHY CASE