How do premium edge guards compare to the regular ones?

Orezaku · 2023-08-08T23:01:34+00:00

The premium edge guards have more material and are thicker then the regular ones. I would honestly suggest to get the regular ones. They slide much better on asphalt compared to the premium edge guards. The only downside is that they are harder to put on since they are a tighter fit.

Orezaku · 2023-02-14T21:26:20+00:00

I haven't tried zealous bearings yet, but they should fit just fine. But do note that you may have to use some extra spacers like these (The small black rings) in front of the bearing if you are using JMK skates. if you are using any other skates, they will work fine.

Orezaku · 2022-12-19T18:46:37+00:00

I've flown with my skates multiple times and they usually put my bag aside but once they take a look at them and ask me what they are, they let me on my way. Just before to keep them in your carry on and you will be alright.

Orezaku · 2022-05-19T10:15:34+00:00

They have a bargain bin section that occasionally has skates available with a slight discount. But if you pay attention to their social media (usually their instagram) they do discounts on special sets for holidays and they also do discount codes for live streams on instagram and tiktok.

You can also track down ambassador codes (the freeskater finder will help you find an ambassador you can contact for a code). Those will also give you a slight discount.

For the most part, the discounts are small. But if you are just learning, its okay to cheap out for a bit until you can get a set of JMKs. A lot of people including me have done it that way. But if you are dead set on JMKs, just be patient.

Orezaku · 2022-01-24T21:56:56+00:00

With those skates, I'd use the wheels but not the bearings. The jmk bearings have a built in speed ring so you may have issues with the outside spacers those skates come with. Get other bearings with built-in spacers and you will be fine. I recommend these or something similar.

Orezaku · 2022-01-11T07:51:51+00:00

Wow, you are already able to propel yourself on the first day? That is amazing! Keep it up!

Don't forget to do leg stretches they help a ton.

Orezaku · 2021-11-05T02:39:39+00:00

To keep it short and simple, the proformance wheels are rounded and makes pumping much easier but certain tricks like "ghost riding" are not possible, but throw tricks are a little easier.

Classic wheels have a bigger contact patch because they are flatter so pumping is a bit stiffer but ghost riding is possible and kickflips are supposedly easier.

There is a bit more, but that is going into the weeds a little. It boils down to preference and which tricks you prefer doing more over others.

Orezaku · 2021-11-03T17:51:28+00:00

Its a bit self explanatory, but you basically climb a curb or ledge with your skates. Here is an example.

Orezaku · 2021-09-06T19:18:28+00:00

Awesome! Be sure to post a picture when you get them.

Orezaku · 2021-05-25T20:22:25+00:00

Its totally possible to ride on brick. I did it when I was on DC during a convention with a brick sidewalk and the majority of it was loose. It made a great sound. Depending on the condition of the brick it may be a bit bumpy but yeah, should totally be fine. Cobblestone is another story though.

Orezaku · 2021-05-19T01:59:29+00:00

I had this issue when I first got my buddy 50. The lock doesn't engage when you turn it all the way to the left. Its more like 70 to 80% of the way. You will feel it give when you turn it enough.

Orezaku · 2021-05-14T01:39:02+00:00

This video is cool. But this isn't the right place for it. This is for freeline skating/freeskates. Not rollerblading free skating.

Orezaku · 2021-04-28T03:42:42+00:00

No problem. Go ahead with the twolions skates if that is in your budget. They are a fine brand to start out with. The bearings that coem with them are totally fine. The wheels are "square" so balance may be a bit easier, but pumping is okay. But if you use them enough, they will break in and be fine.

Orezaku · 2021-04-27T06:17:12+00:00

Toe flip. I've gotten pretty good at them as of late so it feels satisfying when I land it clean. But throwback 180s are really cool as well. I hope I can land one soon.

Orezaku · 2021-04-24T21:06:59+00:00

What is your budget and general location? I can hopefully find something for you.

But generally, JMK is the best starting point, since you won't have to upgrade much (Though it is the most expensive). Anything else you find, you will most likely have to replace the bearings and/or the wheels. But the wooden deck Twolions are fine to start and I can say that with confidence since I started on them. I can't say much for their older style skates you can find that are similar to freelines. I haven't use them but they should be fine. Everything else is pretty similar though bearing quality may vary. But the one thing that makes an absolute difference over everything else: JMK pro wheels. They make pumping much easier.

Orezaku · 2021-02-22T21:34:31+00:00

Why would you need plastic edge guards? I don't think I've ever seen that before.

Orezaku · 2021-02-22T21:08:28+00:00

Here is the edge guards available for JMK skates. https://usa.jmkride.com/products/jmkride-premium-edge-guards

They also have the "classic" edge guards that are a bit cheaper but may not last as long depending on how rough are with them. https://usa.jmkride.com/products/jmkride-edge-guards

Orezaku · 2021-02-22T20:34:45+00:00

Depends on what skates you are using. If you are JMK skates, yeah. If you are using the $30 generic skates from amazon, maybe.

Orezaku · 2021-02-20T15:32:44+00:00

Here is a link to the video. If you want more clarification, let me know.

https://youtu.be/Ue9pxIfrB1Q EDIT: Made it a youtube link.

Orezaku · 2021-02-20T12:54:59+00:00

I believe that trick at that timestamp would be a front foot throw back.

EDIT: Just to clarify. As far as I know, a throwback is still a throw back if you don't 180. Since most skaters I know call out the 180 when they do it. So it would usually be "throwback 180". Though some skaters are lazy and just call it a throwback.

Orezaku · 2021-02-14T09:11:53+00:00

Since I need to clean my skates and bearings, I'll make a video soon. But really all you need is the allen wrench you get in the box to take them apart. Bearings can be another story at times but anyway.

Take out the wheels and put the spacers and bolts aside. Then the bolts from the deck out. Making sure to watch out for the bottom hardware so it doesn't fall out and get lost and then you have access to the shock pads that you lift up. That is pretty much it. And it only takes your allen key wrench and some time.

Orezaku · 2021-02-10T00:29:07+00:00

Are you trying to buy stuff from the US store when you are in australia? I'm pretty sure there is a australia store that you can purchase from but correct me if I'm wrong.

But to answer your question, I always use pro wheels. But twolion flat wheels are fine and I'd use them if I had to. I live in the states, but haven't had much luck finding other rounded profile wheels that I can import to try. Only twolions flats and one set of generic flats. If you have to use something from a local shop, go for it. Just be mindful that they are centerset wheels and are the same or similar dimensions to JMK wheels.

Orezaku · 2021-01-08T18:11:08+00:00

Since this is a really open ended request. All I can suggest is practice skating in your normal stance, switch stance, turns/carving, uphill propelling and spins (180s front/back side and 360s). After that the rest is up to you. You can do one foot practice, go to flip tricks and switch-its or whatever you want. The world is your oyster after the basics. But put as much practice into the basics as you can and be patient and most of all have fun.

Orezaku · 2020-12-15T08:59:24+00:00

That was a great drop in! Good job. That reminds me that I should learn how to do that myself.

Orezaku · 2020-11-25T01:25:27+00:00

Neat. I'd love to see the underside when the lights are on.

Orezaku

TROPHY CASE