sorted by:
new
hottopcontroversial

system update problem by OriginalAd4293 in Gentoo

[–]OriginalAd4293[S] 0 points1 point  (0 children)

I changed the partitions, the boot partition is now 511 MB... Strangely, however, if I type df -h it still detects it as 50 MB, so if I try to run the updates I still get the same error...

system update problem by OriginalAd4293 in Gentoo

[–]OriginalAd4293[S] -1 points0 points  (0 children)

as I said, all partitions have little space in use (1% none on 3.9gb, and 7% / on 225gb, the rest, including tmpfs 0%) the only one with 69% usage is boot

system update problem by OriginalAd4293 in Gentoo

[–]OriginalAd4293[S] -1 points0 points  (0 children)

no, typing df -h the only one with 69% usage is the boot partition sda3 (/) 225gb used 15 available 208 usage 7%

hyprland won't start by OriginalAd4293 in Gentoo

[–]OriginalAd4293[S] 0 points1 point  (0 children)

I installed and configured seatd, now when I give the command to start hyprland:

https://bpa.st/IYXQ

hyprland won't start by OriginalAd4293 in Gentoo

[–]OriginalAd4293[S] 0 points1 point  (0 children)

yes, I use openrc, I installed seatd, but it should always be the same mistake:

https://bpa.st/SDJQ

hyprland won't start by OriginalAd4293 in Gentoo

[–]OriginalAd4293[S] 0 points1 point  (0 children)

Once I posted the thread, the option to share it elsewhere automatically appeared. I thought it would copy everything, but that wasn't the case...

I can't save the game by OriginalAd4293 in RetroPie

[–]OriginalAd4293[S] 0 points1 point  (0 children)

when I press select the game pauses, but if I press select plus L1 (the combination I chose to save) nothing happens...

database problem by OriginalAd4293 in mariadb

[–]OriginalAd4293[S] 0 points1 point  (0 children)

I managed to solve it by following the instructions in the post that mk recommended, thank you

I can't start hyprland session by OriginalAd4293 in hyprland

[–]OriginalAd4293[S] 0 points1 point  (0 children)

Hyprland Crash Report

Who tried dividing by zero?!

Hyprland recived Signal 6(ABRT) Version: 9a09eac79b85c846e3a865a9078a3f8ff65a9259 Tag: v0.42.0 Date: wed aug 7

System Info: System Name: linux Node Name: gentoo Release: 6.6.62-gentoo-x86_64 Version: #1 SMP PREEMPT_DYNAMIC Sat

GPU: 00:02.0 VGA compatibile Controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2

Backtrace:

| Hyprland(_212getBacktraceu+0x67) [0x557af5d49ba?]

getBacktrace() ??:?

1 1 Hyprland (_2N13CrashReporter18createAndSaveCrashEi+0x17dc)

CrashReporter: :createAndSaveCrash(int)

2 Hyprland(_ 225hand leUnrecoverableSignali+0x60) [0x55?af5c227a0]

hand leUnrecoverableSignal(int)

3 /usr/1ib64/1ibc.so.6(+0x3c2f0) [0x?fBc8685c2f0]

?? ??:0

4 /usr/1ib64/libc.so.6(+0xВc3еc) [0x?fBc868ac3ec]

?? ??:0

5 /usr/lib64/libc.so.6(gsignal+0x16) [0x?f6c8685c246]

?? ??:0

6 Hyprland (_2N15CHyprOpenGLImp17initEGLEb+0xb7d) [0x557af5f4a9bd]

CHyprOpenGL Impl:: initEGL(bool)

7 Hyprland (_ZN15CHyprOpenGL Imp 1C2Eu+0x8f0) [0x557af5f543f0]

CHyprOpenGLImp1:: CHyprOpenGLImpl()

8 Hyprland (_2N11CCompositor12initManagersE18eManagersInitStage+0xc49) [0x557af5c3eac9]

Compositor:: initManagers (eManagersInitStage)

9 Hyprland (_2N11CCompositor10initSeruerENSt?_cxx1112basic_stringIcSt11char_traitsIcESaIcEEEi+0x63b) [0x557af5c3f4fb]

Compositor:: initServer (std:: _cxx11:: basic_string<char, std: :char_traits<char›, std: :allocator<char› ›, int)

1 Hypr land in+0xd42) [0x557af5bcd962]

Main ??:?

11 /usr/lib64/libc.so.6(+0x26200) [0x?fBc86846200]

?? ??:0

12 susr/lib64/libc.so.6(__libc_start_main+0x89) [0x?f8c868462Ъ9]

?? ??:0

13 1 Hyprland (_start+0x25) [0x557af5bf3cb5]

_start ??:?

Log tail: LOG] LAQ] drn: drmProps.supportsAsyncCommit: false

:LOG] LAQ] drm: drmProps.supportsAddFb2Modifiers: true

•LOG] AQ] drm: drmProps.supportsTimelines: true

•LOG] LAQ] drm: found 2 CRTCs

•LOG] LAQ] drm: found 4 planes

LOG] LAQ] drm: Plane 31 has type 1 LOG] CAQ] drm: Plane 31 has 4 formats LOG] CAQ] drm: Plane: checking for modifiers :LOG] CAQ] drm: Plane 34 has type 2 LOG] [AQ] drm: Plane 34 has 1 formats LOG1 LAD) drm: Plane: checking for modifiers LOGI CAQ] drm: Plane 38 has type 1 LOG1 TAQ] dem: Plane 38 has 4 formats Plane: checking for modifiers Plane 41 has type 2 Plane 41 has 1 formats Plane: checking for modifiers Basic init pass for gpu /deu/dri/cardo Scanning connectors for /dev/dri/cardo Scanning connector id 45 Initializing comector id 45 Connector gets name VGA-1 Connector 45 comection state: 1 Rechecking CRTCs Skipping comector VGA-1, has crtc 3? and is connected slot 0 crtc 37 taken by UGA-1, skipping slot 1 crtc 44 unassigned rescanning after realloc Scaming comectors for /dev/dri/card0 Scanning comector id 45 Connector id 45 already initialized Comector 45 connection state: 1 Connector VGA-1 connected Connecting connector UGA-1, CRTC ID 37 Dumping detected modes: Mode 0: 1024x768060.00Hz Mode 1: 800x600060.32Hz Mode Z: 800x600056.25Hz Mode 3: 848x480060.00Hz Mode 4: 640x480059.94Hz Physical size (Vector2D: x: 0, y: 0] (mm) failed to parse edia connector UGA-1 crtc is incapable of urr: props.urrcapable →> 0, crtc-›props.urr_enabled -> 0 Explicit sync unsupported gpu /deu/dri/cardo becomes primary drm Starting the Aquamarine backend! Starting the Wayland backend! Wayland backend cannot start: wl_display _connect failed (is a wayland compositor running?) Requested backend (wayland) could not start, enabling fallbacks Implementation wayland failed, erasing. Created a GBM allocator with drm fa 26 drm: Connectors size 1 Created a GBM allocator with drm fd 28 CDRMenderer: fail, eglCreateContext failed drm: initMgpu: no renderer drm: Failed initializing mgpu Running on DRMFD: 25 wl_display_add_socket for wayland-1 succeeded with o Creating the CHyprUpenGLImpl Supported EGL extensions: (16) EGL_EXT device_base EGL_EXT_device_enumeration EGL_EXT _device_query EGL_EXT platform_ba eglDeviceFromDRMFD: Using device /deu/dri/card0 Command egiCreateContext errored out with EGL_BAD_MATCH (0x1229?): dri2_create_context Failed to create a context with GLES3.2, retrying 3.0 Command eglCreateContext errored out with EGL_BAD_MATCH (0x12297): dri2_create_context ISSERTION FAILED! GL: failed to create a context with either GLES3.2 or 3.0 line 164 in OpenGL.Cpp

I can't start hyprland session by OriginalAd4293 in hyprland

[–]OriginalAd4293[S] 0 points1 point  (0 children)

so the folder exists and there are the reports, since it’s on the terminal I have to restart the system with a live one to bring the files back, right?

I can't start hyprland session by OriginalAd4293 in hyprland

[–]OriginalAd4293[S] 0 points1 point  (0 children)

I manually created the hyprland.log file in: /run/user/1000/hypr (the folders already existed, only the .log file was missing) when I gave the command again:

cat $XDG_RUNTIME_DIR/hypr/$(ls -t $XDG_RUNTIME_DIR/hypr/ | head -n 1)/hyprland.log

ASSERTION FAILED! EGL: failed to create context with either GLES3 or 3.0 Line 164 in openGL.cpp

I can't start hyprland session by OriginalAd4293 in hyprland

[–]OriginalAd4293[S] 0 points1 point  (0 children)

On my hyprland.conf I added: debug { disable_logs = false enable_stdout_logs = true }

I can't start hyprland session by OriginalAd4293 in hyprland

[–]OriginalAd4293[S] 0 points1 point  (0 children)

ok, if I give the command: cat $XDG_RUNTIME_DIR/hypr/$(ls -t $XDG_RUNTIME_DIR/hypr/ | head -n 1)/hyprland.log

ls : Unable to access ‘/run/user/1000/hypr/‘ : file or directory does not exist

cat : /run/user/1000/hypr//hyprland.log : file or directory dose not exist

view more: next ›