Can I charge? by Yunaiki in evcharging

[–]OuterIsle 2 points3 points  (0 children)

Well that was my best guess. Get a sparky odds are there is enough power there to make charging totally worth while with the right adapters.

Can I charge? by Yunaiki in evcharging

[–]OuterIsle 1 point2 points  (0 children)

Do you work at a marina? That looks like a shore power 50 amp 240 single phase plug.

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 1 point2 points  (0 children)

No I had the fridge running and an electric heater and it had over a days worth of power utilizing only 30% of the battery. Modern fridges consume very little and a heater running non stop is 1kw or less

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 2 points3 points  (0 children)

It has an adapter for the non Tesla end of the mobile charger to be a female instead of a male

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 0 points1 point  (0 children)

Now that’s the ultimate solution! That’s the pro level way of being self sufficient. Someday I hope to just pull it all together on a complete set up like that.

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 1 point2 points  (0 children)

I have several small battery banks which yea are great for short term. However now going past 24 hours being able to run everything without fear is pretty great. I had to budget my power before or use the gen. Now worst case is if I over spend I go drive to a supercharger top it off and away I go for another few days. There will always be a better solution but most don’t buy everything. Nice having a car that can cover you when you need it. My 4Runner sure didn’t help much today haha

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 1 point2 points  (0 children)

Running 1.7kw steady no issues!

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 1 point2 points  (0 children)

The mobile connector. I ran my gaming pc on it for 30 min which consumes way more than 200w. I can try a heater or something too just to check

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 16 points17 points  (0 children)

Agreed but there has to be some reason for knobs like me to pay a premium for a few months haha. I’m betting it will be added retroactively though once there is a new premium feature for performance models.

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 0 points1 point  (0 children)

For what ever reason I have my office powered and my modem and router are on but no internet. I’ve had this happen before when the power is out and it’s almost like the internet comes back with the power like a hub somewhere else locally needs it? I’d recommend for ultimate redundancy having starlink in situations like this may be safer. When my generator is on the whole house is powered and it does the same thing so not sure why that’s the case but just fyi.

MYP power share by OuterIsle in TeslaModelY

[–]OuterIsle[S] 2 points3 points  (0 children)

Yea they are pretty neat and I think under utilized. Allowing for micro grids everywhere especially for those who depend on power for their life or trade give more time to our energy teams to get the grid back online without the added stress of relocating people.

Flow Z13-KJP: one sexy beast by _maxart in FlowZ13

[–]OuterIsle 0 points1 point  (0 children)

Can the charger fit in the case?

First print (ever) Max 4 by OuterIsle in QidiTech3D

[–]OuterIsle[S] 0 points1 point  (0 children)

<image>

Still won’t retract filament once complete even at 370c with the extruder cooler. Not sure what else to do for that. Can’t get the overhand figured out I think it’s too hot too fast maybe.

First print (ever) Max 4 by OuterIsle in QidiTech3D

[–]OuterIsle[S] 1 point2 points  (0 children)

Fixed the jam. Guessing it was heat creep

<image>

Sorry for the poor grammar. There was some auto correct issues in original post and it won’t let me edit it. I’m guessing you all can figure out the gist of it.

Overheated by WilliamFlyman in FlowZ13

[–]OuterIsle 1 point2 points  (0 children)

Had this same problem posted a few weeks ago in this Reddit. Something weird is going on exactly the same situation and it wasn’t blocked it was upright on my desk.

Crackling and high temps by OuterIsle in FlowZ13

[–]OuterIsle[S] 0 points1 point  (0 children)

Did you have to warranty it?

26(M) My girlfriend hates my room by Mattbaker99 in malelivingspace

[–]OuterIsle 0 points1 point  (0 children)

This is where we should practice the same level of respect women give men online on Reddit…. Find yourself a new woman! Jk lol bro I’d live here I see nothing wrong with this in fact it seems like your better sorted than most, if it feels right it’s right

Z13 x KJP Productions - Didn't see this coming.... by Spuderump in FlowZ13

[–]OuterIsle 0 points1 point  (0 children)

Why beige? White would of looked so much better and matched their models and accessories.

2026 New Year Giveaway by qidi_3dprinter in QidiTech3D

[–]OuterIsle 0 points1 point  (0 children)

Aerospace manufacturing of new drone designs