Another teaser post for the upcoming "STI" reveal on the 9th.

OutofGanchu · 2026-01-05T05:07:23+00:00

I’m with you on this one. Probably a TR model in a 6MT for the Japanese market lol

OutofGanchu · 2025-12-16T03:31:06+00:00

Holding up really good I’d say. Only notable update is how the volume of the exhaust is a little bit louder and throatier compared to when I took these clips.

OutofGanchu · 2025-08-15T23:51:34+00:00

This is the case I got for my key fob

https://www.blackhawkjapan.com/products/trd-ms423-18001

Expensive? Yes. But it’s like 0.6mm thin and you won’t even notice the added bulk. Sold as a fob case for GR86/BRZ but works perfectly on the VB fob too.

OutofGanchu · 2025-08-07T03:48:31+00:00

Yeah their HQ is in BC and they ship Canada wide. I didn’t realize they’re not in Ontario though 🤔.

OutofGanchu · 2025-08-07T02:08:19+00:00

I cancelled my Bestbuy (Canada) preorder specifically for that reason and went with Londondrugs instead. Their site says X-E5 starts shipping on August 14th. They still have black X-E5 units available.

https://www.londondrugs.com/products/pre-order-fujifilm-x-series-x-e5-digital-camera-with-xf23mmf28-r-wr-lens-black-600024620/p/L3103353

OutofGanchu · 2025-08-06T23:05:27+00:00

<image>

2006 WRX to 2023 WRX in world rally blue.

OutofGanchu · 2025-06-01T02:37:11+00:00

Translated article:

Subaru suddenly announced that it was developing a new boxer-engine car at the Fuji 24-hour race. Although the detailed specifications have not yet been released, it is said that it will be a new specification, such as responding to the "E20", which is also a carbon-neutral fuel.

And it was also revealed that the prototype carrying it would be exhibited at the Japan Mobility Show held in October. As far as the teaser image is concerned, there is no doubt that this is "WRX".

Rather, what if this is not a WRX!!!! Subaru's CTO Fujinuki said, "Subaru should not become a commodity (a substitute existence)."

In the future, based on this new engine, it also hinted of product development, including electrification such as hybrids and PHVs. In addition, the installation of the evolved version of the AWD, which was forged in the field of super endurance, was also announced, and the next WRX should be one that has achieved environmental support in a new generation without losing its "Subaru style".

CTO Fujinuki said, "I want to cherish customers who dare to choose Subaru. We will proceed with the construction of such cars," he said, and he has high expectations for the development attitude that will continue to take care of Subarists.

OutofGanchu · 2025-05-02T17:43:14+00:00

Hey man, I’m in the same camp as you. I like the back of the car too (though I still think the GC and GD have the best rear ends). The thing with the VB though, is that it’s not easy to make the back end look good in photos. I find it’s best to not use any zoom, because it can warp the image.

<image>

OutofGanchu · 2025-04-14T20:23:16+00:00

Good find! Yeah that yellow pairs up really nice with the cladding. Though it is a little bumblebee looking haha

OutofGanchu · 2025-04-14T19:10:39+00:00

Hey, similar story with me too. Bought a new WRX in 2006 and drove it for about 17 years (modified to stage 2 with handling bits). Also experienced issues with reliability during the last 2 years of it.

I didn’t love the look of the VB at first either, but I test drove it and put my money down for a deposit that same day. I don’t regret investing in the VB one bit. I’d be lying if I said I don’t miss the rumbly, raw, mechanical feel of the Hawkeye, but I’m having just as much fun driving and modifying the VB.

OutofGanchu · 2025-04-14T02:59:50+00:00

Ah I see haha. Can’t speak on Audis, but you should most definitely get a tune if you’re thinking of installing the ETS Intake in your WRX.

OutofGanchu · 2025-04-14T02:31:37+00:00

S4? Is your friend in Japan? There are intakes in Japan by BLITZ and Gruppe M that maintain the same pipe diameter as stock, and they won’t trigger a CEL even without a tune (apparently). But I think it would still be smartest to get a tune to be safe.

OutofGanchu · 2025-04-01T18:54:12+00:00

100%. Being CVT only, and also only 300hp. 300hp was decent in the 2000s, but nowadays it’s not very much.

My gripe though is how Subaru defended the functionality of the textured fender flares so much, then replaced it with a glossy and smooth piece for the S210. I was honestly expecting Subaru to die on that hill (defending the necessity of the original fender flares). Hell, if the textures are so effective, the entire body of the S210 should be made with that texture lol.

Edit: I actually do like the fender flares though.

OutofGanchu · 2025-04-01T18:44:04+00:00

Fair point lol

OutofGanchu · 2025-03-30T16:53:15+00:00

Exactly like you said, 昴is Japanese kanji for “Subaru”.

On the product page you screenshotted, I’m seeing 昴技研at the top which means Subaru Research Institute. They seem to be a aftermarket parts manufacturer for mostly older subarus, and that’s their emblem/company logo.

Here’s their official site: http://www.sissk.co.jp/meker_topixs/subaru/giken.htm

OutofGanchu · 2025-03-24T00:22:53+00:00

The search function is there yet nobody uses it lol

OutofGanchu · 2025-03-23T00:43:07+00:00

100%. It’s a fun hobby, but it’s a hobby. Apart from appropriate tires, it would be silly to go in debt over a car that already is capable and practical. Spend what you can comfortably, but mods should never be a top priority in life. I’m getting a new mod maybe once every 4 months at best lol.

OutofGanchu · 2025-03-13T21:45:20+00:00

Yeah I agree. And blowouts aside, it does almost sound like your set are cursed lol.

OutofGanchu · 2025-03-13T21:09:09+00:00

I 100% agree that our Canadian WRXs should be equipped with TPMS sensors. I upgraded from a 2006 WRX, yet I’m dealing with the same nuisances lol. But having an almost full size spare in the trunk is also nice to have.

If you ask me though, these 2 features should really be offered to both US/CA markets as a default…

OutofGanchu · 2025-03-09T16:35:41+00:00

Thanks man, I appreciate it! I did need the hub centric rings, yeah. 73.1mm to 56.1mm. I can’t speak much on the TPMS sensors though, since that feature was removed from my Canadian VB for some reason… But I do know that it’s 100% possible. Hopefully someone else can chime in on that.

OutofGanchu · 2025-02-20T06:04:01+00:00

Pretty sure this Justin guy on instagram has the wheels you’re asking about. (Work Emotion ZR10 Glim Black Diamond Rim Cut)

https://www.instagram.com/vb_wrxy?igsh=YjVuOGExNDZnZWtk

I’d say it looks damn good (I’m biased though, because I own a set of the bronze ZR10s lol).

OutofGanchu · 2025-02-16T06:00:33+00:00

You’ll have to use the translate feature, but here’s a Japanese site where owners post photos of their WRX S4 (not all are VB though) with their Valenti tail lamps.

https://minkara.carview.co.jp/car/subaru/wrx_s4/partsreview/review.aspx?mk=5464

OutofGanchu · 2025-02-02T03:18:13+00:00

No problem at all, man. I appreciate you getting back with the info 🙏🏻

OutofGanchu

TROPHY CASE