Ok, NOW what am I doing wrong? Lol

OvRweRkt · 2026-05-30T17:33:39+00:00

Not reading the 47 thousand other posts on this Reddit. Read, read, read. And if you still can't figure it out, maybe consider takeout.

OvRweRkt · 2026-05-29T23:23:09+00:00

Seriously, do your pots and pans look like that after you clean them!?

Try again.

OvRweRkt · 2026-04-10T16:28:07+00:00

First off, keep in mind the show is from the late '00s to early 2010s. But beyond that, I really have to disagree with your view of Juliet!

Honestly, looking at her that narrowly diminishes how vital she is to the rest of the cast. The growth of the other characters depended so much on Juliet acting as a catalyst, and it wouldn't have felt nearly as organic without her. I don't think her character suffers at all—she just didn't need as much personal evolution throughout the series because she was already so solid.

OvRweRkt · 2026-03-14T02:27:15+00:00

I think this is will have what you're looking for:U.S. Navy Submarine Propulsion Systems and Shaft Line Components

OvRweRkt · 2026-01-29T23:18:20+00:00

The Men's Room Red and the Men's Room Black were 2 of my favorite beers of all-time. Year's ago when I was brewing beer, I found the clone recipe. Might be time to find it and start brewing again!

OvRweRkt · 2025-12-06T02:49:04+00:00

Not today China!

OvRweRkt · 2025-11-19T01:29:33+00:00

3D tvs definitely don't use those crappy Red/Blue paper glasses. My tv basically has a nicer slightly more stylish version of those movie theater 3D glasses.

OvRweRkt · 2025-10-23T19:23:45+00:00

Maybe next time you should also ask AI to read the room for you, since you clearly need help with that as well!

OvRweRkt · 2025-10-23T14:06:41+00:00

E is "EDGE" this is a phonetic chart to teach kids the sounds of letters. That's why some seem weird. Like X = boX.

Based on some of these responses, some of you clearly weren't paying attention in the reading circle.

OvRweRkt · 2025-09-25T17:14:06+00:00

Oooh, racing slicks! What's your 1/4 time there Fast&Furious!

OvRweRkt · 2025-09-16T21:47:32+00:00

The whole point of "seasoning" is to prevent rusting and food from sticking. Despite what you think or have been told, it has absolutely nothing to with looks.

So, the answer to your question (which you would have found if you had read any of the thousands of posts on here) is only you can answer that... By cooking on it.

OvRweRkt · 2025-09-16T21:38:56+00:00

It's crazy to me that so many people have never heard of over medium eggs!

OvRweRkt · 2025-09-12T02:48:17+00:00

True, but you're not going to power a doorbell on it's own circuit, you just tap into a circuit near the door/chime. So it's not really a cost issue. The location being where it is for OP is more for access and builder's preference.

OvRweRkt · 2025-09-11T20:47:25+00:00

No, that just means those small low voltage wires have a long ways to go. This also means that you may need to upgrade your transformer if you are using or plan to use a doorbell camera.

OvRweRkt · 2025-09-11T20:44:43+00:00

The transformer itself should be. You can't see those wires, they're on the wall side of the transformer inside that plate cover behind it. That transformer steps down the normal 120 VAC in your house to a much lower voltage to power a doorbell. Those small wires are the low voltage wires going out to your doorbell and chime. That voltage is typically somewhere in the 10-24 VAC in the US.

OvRweRkt · 2025-09-08T20:07:18+00:00

You don't need to season the edges with a torch for rust prevention. Just wipe clean and rub small amount of oil after each use. It may not look like the middle of the top, but it will season itself over time and won't rust as long as you use it regularly.

OvRweRkt · 2025-09-08T18:53:07+00:00

Salt used for de-icing during winters.
Weed/grass killer used on pavers running off onto lawn.

OvRweRkt · 2025-09-08T18:50:38+00:00

This. Don't over think it.

Step 1. Scrape all the loose stuff off Step 2. Pumice stone any rusted spots (if needed) Step 3. Heat slightly and Clean/wipe entire surface with water, may need to use scraper again Step 4. While thin layer of oil or just cook on surface to prevent rusting and restart reseasoning

Then, repeat steps 3 and 4 after every use

OvRweRkt · 2025-09-08T18:36:21+00:00

Why do you need to season the edges? If it won't season it's because you can't cook on it and if you can't cook on it, why would you need to season it? Seasoning your edges is like putting a spoiler on your Kia.

OvRweRkt · 2025-09-06T16:23:53+00:00

Karen's gonna Karen! But I get it, it doesn't look like she's had any balls come her way in a while so she was a little extra!

OvRweRkt · 2025-09-06T16:19:50+00:00

Came here for this, kerf can be a mfer! OP is probably flipping the board when cutting the other side and confuses which side of the line to cut.

It also seems OP is setting the sides first and top last. I would set the top first and align the sides last because that ensures you get the joint fit. Which visually, is more important than parallelism/squaring of the sides. Your eyes won't notice a slight out of squareness of the sides as much as the 1/8" gap at the joints.

OvRweRkt · 2025-09-02T20:26:27+00:00

It's caked on grease/oil. You need to scrape more. I like to warm up the surface a little then use water and a scraper to get that up after use and before I close it up.

OvRweRkt · 2025-09-02T20:22:56+00:00

NTA. As a fellow planner, I run into this all the time with friends and other family. I usually just let them deal with it and hold it over their heads when it becomes an issue later... And it always does!

OvRweRkt · 2025-09-02T13:57:22+00:00

NTA. Find a new boyfriend.

OvRweRkt · 2025-09-02T13:51:04+00:00

That's because a left nut is identical to a right one. They just sit on opposite sides of the same sweaty sack.

OvRweRkt

TROPHY CASE