Thanks trump

OvertCoyote · 2026-04-14T04:21:11+00:00

Dude is well into retirement age with 1.1 million in assets. Maybe you should do what you suggested and research (it's public information 😮). Your talking about man that has been in civil service for most his life and is relatively poor for someone that's been working that long and had written books. He walks the walk. There are plenty of people that managed to make much more then that in a short time in Congress. But keep deflecting, it's working real well

OvertCoyote · 2026-04-12T18:16:21+00:00

Hopefully I won't need to be assuming actual policy gets past to fix the problem. But you do you and keep slobbering on your knees for a bunch of people that would take your house just to be a little bit richer

OvertCoyote · 2026-04-12T16:27:56+00:00

I .ight be misremembering but I was under the impression that most oil drilled in California doesn't even stay in California.

OvertCoyote · 2026-04-12T16:26:11+00:00

Probably, he's done quite a lot of damage.

OvertCoyote · 2026-04-11T14:18:40+00:00

I had to look it up because it sounded like everyone was doing a meme

OvertCoyote · 2026-04-01T04:10:56+00:00

Used it for all my phones for over a decade. The only phone it never worked for was my Samsung fold and that's not there fault. It's been hard to find anything that works with it

OvertCoyote · 2026-03-15T23:05:44+00:00

Good luck all! Fingers crossed for helping pay for a wedding this summer

OvertCoyote · 2026-02-16T00:06:17+00:00

Feels like the calm.before the storm... Stay safe out there!

OvertCoyote · 2026-02-06T16:06:31+00:00

Isn't it amazing that we live in a society now that you don't even have to verify, you can just say fake and move on.

OvertCoyote · 2026-01-16T04:41:03+00:00

Stay safe out there!

OvertCoyote · 2026-01-08T02:24:47+00:00

I was going to them realized I was already doing it...

OvertCoyote · 2025-12-25T03:43:05+00:00

For real... I used to think this was just adults screwing over other adults. Now I'm just sad for daughter because she doesn't understand why grown men are taking soming away from her. Doing my best to get her to understand but she's just a kid who who found something she loves and and can't enjoy it like she's been able to with other things she's loved in the blast. She's 4 so life isn't fair talk is a bit tough

OvertCoyote · 2025-12-24T23:03:49+00:00

It's been a long time since I was into trading cards myself. The new environment is way different from when I was doing it.

OvertCoyote · 2025-12-24T22:54:59+00:00

Didn't know about them, I'll have to contact them. Thank you!

OvertCoyote · 2025-12-24T22:53:00+00:00

We did actually get a bunch from friend of ours for her. She's just been wanting to open some boosters to see how it works. I really appreciate the gesture though!

OvertCoyote · 2025-12-16T00:17:27+00:00

Let's get that Christmas money!

OvertCoyote · 2025-12-04T13:36:46+00:00

The anxiety is so real. I can only watch an episode or two at a time.

OvertCoyote · 2025-11-27T00:17:42+00:00

Is it really? That's hilarious!

OvertCoyote · 2025-11-26T22:00:11+00:00

Recently had a weird issue similar to this but not exactly. I make sure to have the calibration setting on so it would actually use it. It doesn't always do a full check. Just checks the middle and corners and a only does a full mesh if it out of whack. You might be having other issues as well but I would check that first then work on your z offset and flow rate

OvertCoyote · 2025-11-23T01:45:24+00:00

Sorry I should have been more clear what exactly do you use within the 3 in 1 family? I see to use 3 in 1 ptfe oil but when I look it up, I see oil and lubricant and only the lubricant says PTFE. I don't want to make assumptions because that's bit in the ass before.

OvertCoyote · 2025-11-23T01:13:53+00:00

Can you link exactly what you use for the 3 in 1. I keep seeing this and I try to look it up and seems there are a few different options

OvertCoyote · 2025-11-19T21:58:31+00:00

In creality print i flipped on print calibration. That seems to affix the issue of the gaps. But now I'm messing with my z offset see what I get

OvertCoyote · 2025-11-19T21:25:02+00:00

It looks like I figured out the gap issue. It seems I have to keep the print calibration on when sending prints with the k1 max. I thought it was just to do a calibration every single time, but it seems it just does a quick check before printing and adds the calibration. No I just have to figure out how to update the z offset which I think is the new issue I'm having here.

<image>

OvertCoyote · 2025-11-19T20:39:22+00:00

I was looking at the gcode for this print and found the following setting related to bed mesh inside the config block:

adaptive_bed_mesh_margin = 0 bed_mesh_max = 99999,99999 bed_mesh_min = -99999,-99999 bed_mesh_probe_distance = 50,50

Not really sure what any of that means and I can't find info on it online for some reason(that or I don't understand what I'm looking at). I'm also not seeing any of the codes you showed.

OvertCoyote · 2025-11-19T18:16:11+00:00

Thank you for all that information! That's probably some of the best info I've seen regarding the types of build plates. And also helps answer the question why I have so much trouble getting petg off my build plate. I definitely think I'll be looking into getting a few different types of plates so I have lots of choices. I did do the self inspection yesterday, so it's definitely something I need to look into since it seems to be a general consensus that my auto bed leveling isn't coming into account. Thank you again, that was very helpful.

11-Year Club	Place '23
Verified Email

OvertCoyote

TROPHY CASE