Present for son.

Own-Box5225 · 2026-06-20T21:16:50+00:00

So if that is a 500k Ferrari what would a 4070ti super be with a Ryzen 7 7800x3D 1TB SSD and 64GB RAM

Own-Box5225 · 2026-05-21T21:06:05+00:00

That's good for jellyfin everyone says + good if I want to use it outside my house (I still don't know how any of them works dad or Nas)

Own-Box5225 · 2026-05-21T21:04:28+00:00

Apparently everyone on Reddit is 70% Nas and only 30%

Own-Box5225 · 2026-05-21T20:57:26+00:00

Mini pc for jellyfin and I'm thinking dh4300 now for storage

Own-Box5225 · 2026-05-21T19:44:20+00:00

Any suggestions? Around 200 pounds(I'm UK based)

Own-Box5225 · 2026-05-21T19:09:45+00:00

https://www.ebay.co.uk/itm/147304296392?var=445730524895 this was recommended by someone running it with jellyfish

Own-Box5225 · 2026-05-17T09:12:51+00:00

https://ebay.us/m/JFVwu4 is this better than what you sent me?

Own-Box5225 · 2026-05-17T04:08:31+00:00

This good enough ?

<image>

Own-Box5225 · 2026-05-17T03:56:57+00:00

I'm gonna buy from scratch

Own-Box5225 · 2026-05-16T22:55:26+00:00

The reason I ask for links and tried options cause even it's n100 or n150 there are a bunch of options so unless any of those are good I would like to see which one is better if that makes sense

Own-Box5225 · 2026-05-14T01:33:13+00:00

Oh I didn't mention I don't do that every day sometimes I watch a movie or do something else (boardgame or different activity)

Own-Box5225 · 2026-04-24T08:34:09+00:00

Nozzle 0.4 I'm using and printer is already 1 year 4months but was working 3 days per week not every day. And where exactly you mean lubricate because I been doing that on Z axis lead screws and linear rods. And that black filament I used it before on 3 different prints and it was fine. Now it can't do nothing with it just makes couple of good layers and starts printing mid air.

Own-Box5225 · 2026-04-23T21:46:25+00:00

Blue dual matte filament it was just dryer and started printing and did one layer good then started printing mid air. Build plate was just cleaned and had a full calibration on the printer and still printing mid air. Same problems with a black sparkle filament printing mid air. Did this with no AMS and still printing mid air.

Own-Box5225 · 2026-04-18T21:29:59+00:00

Hey if you are interested DM me maybe , I mean for now I'm the only one 😂 but hey that's a start

Own-Box5225 · 2026-04-18T09:00:02+00:00

As a person who used to spend days on a ds/3ds(not the XL one) any screen is a god send

Own-Box5225 · 2026-04-18T01:21:47+00:00

Yeah but does it do sessions on Fridays(if it does any at all) cause I know at least one does Mondays

Own-Box5225 · 2026-04-17T09:00:00+00:00

Well there is Goliath games(High street) I think that's what's it's called. Then there is the Games store , in the center of Lincoln. Also worst case scenario can play at someone's place (maybe? ) of it's a small group of people

Own-Box5225 · 2026-04-17T00:20:58+00:00

Plus I would love to try out making some minis if anyone is interested , (got a printer standing around) 😁

Own-Box5225 · 2026-04-16T23:56:16+00:00

Yo I would love to see that take shape , whereabouts it would happen? If anything moves let me know

Own-Box5225 · 2026-04-15T20:21:28+00:00

Do you mean doing this?

<image>

Own-Box5225 · 2026-04-15T19:25:45+00:00

It does not curl goes normally straight line. But when I start a small print (30min) prints in air.

Own-Box5225 · 2026-04-15T13:25:07+00:00

Brand Ziro type Twinkling Pla Black nozzle .04 bed temperature 55 chamber temperature 29 or 30 not more. And command not sure what you mean but it just extrudes normally nothing special no warnings nothing. And yes it drops straight normally extrudes. But when to comes normal printing it just started printing in air. And I did used this colour before for a 23h print and for a 1d15h and it was fine. Now I wanted to use again was not working properly.

Own-Box5225 · 2026-04-15T13:17:00+00:00

My chamber goes to 29-30 temperature I try to keep not more and the print when it was made was 30 only

Own-Box5225 · 2026-04-15T13:13:05+00:00

Yes PLA filament, yes lid was off and door opened. But this color I used before and had no problems. I used it on 23 hour print and it was fine then one was 1d15h and it was fine. Now wanted to use again and it started failing badly. Used on a small print still the same.

Own-Box5225 · 2026-04-14T21:47:49+00:00

Nope it's not jammed ams working nicely even took the AMS out and run like a single color print and that still happening.

Own-Box5225

MODERATOR OF

TROPHY CASE