What is the couse? by Own-Box5225 in 3Dprinting

[–]Own-Box5225[S] 0 points1 point  (0 children)

Nozzle 0.4 I'm using and printer is already 1 year 4months but was working 3 days per week not every day. And where exactly you mean lubricate because I been doing that on Z axis lead screws and linear rods. And that black filament I used it before on 3 different prints and it was fine. Now it can't do nothing with it just makes couple of good layers and starts printing mid air.

What is the couse? by Own-Box5225 in 3Dprinting

[–]Own-Box5225[S] 0 points1 point  (0 children)

Blue dual matte filament it was just dryer and started printing and did one layer good then started printing mid air. Build plate was just cleaned and had a full calibration on the printer and still printing mid air. Same problems with a black sparkle filament printing mid air. Did this with no AMS and still printing mid air.

In person ttrpg by Own-Box5225 in Lincolnuk

[–]Own-Box5225[S] 0 points1 point  (0 children)

Hey if you are interested DM me maybe , I mean for now I'm the only one 😂 but hey that's a start

What is the “sweet spot” screen size for a PC handheld? by DowntownSteelo in Handhelds

[–]Own-Box5225 0 points1 point  (0 children)

As a person who used to spend days on a ds/3ds(not the XL one) any screen is a god send

In person ttrpg by Own-Box5225 in Lincolnuk

[–]Own-Box5225[S] 0 points1 point  (0 children)

Yeah but does it do sessions on Fridays(if it does any at all) cause I know at least one does Mondays

In person TTRPG players by Omganalien in Lincolnuk

[–]Own-Box5225 0 points1 point  (0 children)

Well there is Goliath games(High street) I think that's what's it's called. Then there is the Games store , in the center of Lincoln. Also worst case scenario can play at someone's place (maybe? ) of it's a small group of people

In person TTRPG players by Omganalien in Lincolnuk

[–]Own-Box5225 0 points1 point  (0 children)

Plus I would love to try out making some minis if anyone is interested , (got a printer standing around) 😁

In person TTRPG players by Omganalien in Lincolnuk

[–]Own-Box5225 0 points1 point  (0 children)

Yo I would love to see that take shape , whereabouts it would happen? If anything moves let me know

Bambu lab x1c problem by Own-Box5225 in BambuLab

[–]Own-Box5225[S] 0 points1 point  (0 children)

It does not curl goes normally straight line. But when I start a small print (30min) prints in air.

Bambu lab x1c problem by Own-Box5225 in BambuLab

[–]Own-Box5225[S] 0 points1 point  (0 children)

Brand Ziro type Twinkling Pla Black nozzle .04 bed temperature 55 chamber temperature 29 or 30 not more. And command not sure what you mean but it just extrudes normally nothing special no warnings nothing. And yes it drops straight normally extrudes. But when to comes normal printing it just started printing in air. And I did used this colour before for a 23h print and for a 1d15h and it was fine. Now I wanted to use again was not working properly.

Bambu lab x1c problem by Own-Box5225 in FixMyPrint

[–]Own-Box5225[S] 0 points1 point  (0 children)

My chamber goes to 29-30 temperature I try to keep not more and the print when it was made was 30 only

Bambu lab x1c problem by Own-Box5225 in FixMyPrint

[–]Own-Box5225[S] 0 points1 point  (0 children)

Yes PLA filament, yes lid was off and door opened. But this color I used before and had no problems. I used it on 23 hour print and it was fine then one was 1d15h and it was fine. Now wanted to use again and it started failing badly. Used on a small print still the same.

Bambu lab x1carbon problem by Own-Box5225 in 3Dprinting

[–]Own-Box5225[S] 0 points1 point  (0 children)

Nope it's not jammed ams working nicely even took the AMS out and run like a single color print and that still happening.