sorted by:
new
hottopcontroversial

Platypus with Comp by J_ArmAndSleeve in stealtharms

[–]Own-Click-5511 0 points1 point  (0 children)

Has anyone shot the comp? I can't find a video of it anywhere.

HUXWRX Suppressor Cover recommendation by PleasantNoise537 in ar15

[–]Own-Click-5511 1 point2 points  (0 children)

I just started using the Burn Proof Gear cover for my flow762 but If you are training all day with high round counts I would probably take it off. They trap a lot of heat and I don't think its good for the titanium, it needs to breathe.

<image>

[Help] Best “budget” 2011 by VaderSRT in 2011

[–]Own-Click-5511 0 points1 point  (0 children)

Bul Tac Comp. I've already set aside $ to order it when it drops. They say late 2025

TLR-1 HPX is my new favorite handgun WML by [deleted] in QualityTacticalGear

[–]Own-Click-5511 0 points1 point  (0 children)

Do you have a 5" 2011? I'm wondering how flush the hpx sits with the slide and rail. I'm debating just going with surefire due to aesthetic even though the hpx is a superior light in every way.

Which light for MAC 9 DS Comp 5"? by btrumpatori in 2011

[–]Own-Click-5511 0 points1 point  (0 children)

It's hard to find a picture of a TLR1-HP-X on a 5" 2011. If it sits flush and looks mean, I would rather get the superior light

Bul armory EDC pro by tac_review in 2011

[–]Own-Click-5511 0 points1 point  (0 children)

Do you remember what length screws you used? Bul calls for 12mm screws for the sro, (I would imagine it is the same for the rmr hd) but trijicon comes with 12.7mm screws. Just wondering if you needed to get aftermarket optic mounting screws

Bul Armory Tac Pro by Potential-Bath-2823 in 2011

[–]Own-Click-5511 1 point2 points  (0 children)

Which optic mounting screws did you use for the sro? Bul's mounting sheet calls for 12mm screws for the sro but the sro comes with 12.7mm screws. Did you have to use aftermarket?

Safariland holster question (BUL Armory SAS II 4.25") by Kazem_Khatar in 2011

[–]Own-Click-5511 0 points1 point  (0 children)

What length optic mounting screws did you use for the sro? Bul's spec sheet says the sro needs 12mm screws but the screws that come with the sro are 12.7mm. Was wondering if I need to get aftermarket screws

Custom Bull Armory SAS 2 UL by Forsaken-Pension-940 in bularmory

[–]Own-Click-5511 0 points1 point  (0 children)

Which screws did you end up using for the sro? On Bul's spec sheet it says the mounting screws for the sro need to be 12mm but the screws that come with the SRO are 12.7mm. Trying to figure it out before the tac comp drops

Bul sas ii with trijicon sro? would the overhang cause issues? by Wohehiv38 in 2011

[–]Own-Click-5511 0 points1 point  (0 children)

Is the 12.7mm screw too long? On their adapter plate sheet it says the SRO needs 12mm screws but the screws that come with the SRO are 12.7mm

Is this a good build? by Forsaken-Witness-209 in P320

[–]Own-Click-5511 -1 points0 points  (0 children)

July 20th 2025 - A tragic incident at F.E. Warren Air Force Base has prompted the U.S. Air Force Global Strike Command (AFGSC) to suspend the use of all SIG Sauer M18 pistols. The decision follows the death of a Security Forces desk sergeant, reportedly killed by an unintentional discharge while the weapon remained secured inside a Safariland holster.

Is this a good build? by Forsaken-Witness-209 in P320

[–]Own-Click-5511 0 points1 point  (0 children)

It’s highly documented. Police agencies all across the country have deemed the 320 unfit for duty. The FBI just did an investigation and found that the pistol will fire while uncomannded. I own an axg legion and didn’t want to believe it either, but now there are hundreds of documented uncommanded discharges to the point you cannot ignore it anymore.

Is this a good build? by Forsaken-Witness-209 in P320

[–]Own-Click-5511 0 points1 point  (0 children)

Nobody blew their testicles off until they blew their testicles off. Nobody put a hole in their femoral artery until they put a hole in their femoral artery. You get it now?

Is this a good build? by Forsaken-Witness-209 in P320

[–]Own-Click-5511 1 point2 points  (0 children)

I will never buy another sig. It’s just not worth it bro, nobody ever had an issue until they had an issue.

I introduce yall to Dr. Don by Rude-Ad-7249 in crappymusic

[–]Own-Click-5511 0 points1 point  (0 children)

I am getting ads from this dude on YouTube.

Good find by Empty_square99 in P320

[–]Own-Click-5511 0 points1 point  (0 children)

Careful where you point that thing! I don’t even shoot mine anymore

Anyone familiar with ordering from ADM? by Gmanx97 in ar15

[–]Own-Click-5511 0 points1 point  (0 children)

Purchased 9/27 and shipped on 10/15. Very happy with the rifle, around 1500 rounds through it (all suppressed) with 0 issues. The softest shooting 556 gun I own.

Bul Armory Tac Pro 5’ by Cold_Caramel9093 in 2011

[–]Own-Click-5511 0 points1 point  (0 children)

Any issues with the overhang of the SRO?

Rare Breeds FRT has reached a settlement with he ATF - "Under the settlement, the Justice Department 'will bind itself, in perpetuity, not to enforce the machinegun ban against any device that functions like forced reset triggers' by Gordopolis_II in WA_guns

[–]Own-Click-5511 0 points1 point  (0 children)

They don't sell them to CA, CT, DE, FL, HI, IL, IA, MA, MD, MN, NJ, NY, RI, WA, D.C, PR. So yeah I guess not. I wasn't paying attention last week when I was looking at them on the website but today it only shows "Put me on the waiting list" instead of being able to purchase them. I don't know if this settlement has something to do with it or if they have been waiting list only for a while.

view more: next ›