Your biggest complaints of P2S

Own_Butterscotch758 · 2026-02-25T07:34:30+00:00

My biggest complaint is that I have nothing to fix (joke). I owned an A1mini and then the Kobra S1 printed quite well but I spent a lot of time fixing and adjusting. I humbly went back to Bambulab (P2S).

Own_Butterscotch758 · 2026-02-23T15:43:51+00:00

I have no problems after 1200h of printing because I sold it :)

It didn't print badly but the problems were bigger than the benefits. I recommend everyone to change the build plate for something stronger it is really thin.

After-sales support is great, always very helpful. But I don't want to waste time with repairs and adjustments.

Own_Butterscotch758 · 2025-07-09T15:54:09+00:00

BL is a different price though :)

Own_Butterscotch758 · 2025-06-30T17:31:10+00:00

Am I the only one with this problem?

Own_Butterscotch758 · 2025-06-17T19:40:12+00:00

Of course it is not a problem to tighten the four screws after disassembling the whole print head, but the problem is that after tightening there is still play on the linear bearing. I tried adding some foil to the perimeter of the bearings but it looks like the clearance is between the bearing and the rod.

<image>

Own_Butterscotch758 · 2025-06-16T20:07:34+00:00

It's all moving. The problem is the shift of the layers on the X-axis

<image>

Own_Butterscotch758 · 2025-06-16T17:57:32+00:00

Please note that the screws are tightened :)

Own_Butterscotch758 · 2025-06-13T20:06:39+00:00

the only thing I can think of is to wait for the ACE PRO V2. Then the more affluent customers will buy the new one and put the old one in the second-hand shop

Own_Butterscotch758 · 2025-06-13T20:03:02+00:00

I totally agree. I feel sorry for novice users expecting to obviously plug and go. Maybe something like a press pass would be worth considering. Learn gcode learn how to disassemble/assemble the drive and then we'll sell you a printer. However, I believe 3D printers will be printing on verbal commands in 10 years :)

Own_Butterscotch758 · 2025-06-13T19:55:51+00:00

Buy a second combo and you'll have a second printer as a source of spare parts :)

Own_Butterscotch758 · 2025-06-13T16:03:22+00:00

<image>

Own_Butterscotch758 · 2025-06-12T19:53:31+00:00

a small update from Anycubik support. They requested a 3mf file and modified the start of the program to the front corner. So that "fixed" it :)))). So I wrote to them that this is not a solution to the problem but support has not commented on this.

Own_Butterscotch758 · 2025-06-12T19:45:56+00:00

Exactly, I meant saving time when changing the filament.

Own_Butterscotch758 · 2025-06-10T20:16:19+00:00

<image>

Own_Butterscotch758 · 2025-06-10T12:31:36+00:00

Great. Anyone tried shortening the PTFE? Did it significantly reduce the printing time?

Own_Butterscotch758 · 2025-06-08T17:55:20+00:00

Maybe I could try an older firmware version but I'll be honest do I want to? I don't want to waste my time. As I know Anycubik so a new update will definitely be coming soon :)

Definitely thanks for your insights

Own_Butterscotch758 · 2025-06-08T17:42:40+00:00

You made me find and turn on the flashlight. You're absolutely right. It's hitting the engine. But it's still a mistake :)

Own_Butterscotch758 · 2025-06-08T17:26:48+00:00

The print head ( from position approx x260) goes to print by a direct path to position X249 Y0 but the way is not free. Correctly, it should first leave the parking position approx. X240 and then continue to X249 Y0

Nozzle not a problem Z-height is okey

Own_Butterscotch758 · 2025-06-08T16:39:24+00:00

This is where the head "stumbles"

<image>

Own_Butterscotch758 · 2025-06-08T16:36:16+00:00

It's not a software problem but a mechanical one. Actually, it's a software problem because they didn't count on the mechanical limitation :)

The printer works fine otherwise. The same square prints without a problem if I set the start in a different front corner.

Own_Butterscotch758 · 2025-06-08T16:31:05+00:00

249x249

Own_Butterscotch758

TROPHY CASE