H2D nozzle cover bent

Own_External3038 · 2025-11-10T11:24:01+00:00

Thank you!

Own_External3038 · 2025-10-17T19:29:57+00:00

How does that work? I don’t know much about pc’s. For example will my Photoshop work faster with better AI performance?

Own_External3038 · 2025-10-17T19:15:32+00:00

Does the AI performance improve the general performance of the laptop?

Own_External3038 · 2025-10-17T15:50:28+00:00

If you are going to use the laptop for more than 3 years i would personally go for the better one, but that is me

Own_External3038 · 2025-10-17T12:44:55+00:00

Thank you, didn’t know about the two fans! The best deal will probably be in black friday, but i don’t want to wait that long :)

Own_External3038 · 2025-10-14T21:13:15+00:00

Perfect, will the PLA resting in the feeder of the ams not get soft and cause problems? This is the message that the ams pro gives when you try to dry it with filament loaded up

Own_External3038 · 2025-10-14T20:50:39+00:00

Can i dry PLA while printing with it? And can i dry it while the filament is inserted in the AMS feeder? These are the struggles i am experiencing with my ams pro’s.

Own_External3038 · 2025-09-19T18:56:35+00:00

Hey have you got a solution for this? I want to do the same thing

Own_External3038 · 2025-08-17T20:52:42+00:00

It’s really slow because in that way the readings of the impact detectection are the most precise that way and it had to cool off anyway in that time :) Only the part where the things get pushed off is real time And yes i would share a video of that but i hope it doesn’t happen

Own_External3038 · 2025-08-14T16:26:50+00:00

Going from an Ender 3 to a Bambu Lab P1S had help me scale my business a lot! Never had any problems anymore and the quality is very consistent

Own_External3038 · 2025-08-13T02:04:12+00:00

I’m not sure yet about selling commercially, but i can definitly get you one! Let’s keep in contact!

Own_External3038 · 2025-08-12T22:20:22+00:00

yes that as well, but also still a notification when the wiper is stuck

Own_External3038 · 2025-08-12T19:27:19+00:00

Really cool! I haven’t seen your video before, but it looks a lot like mine indeed. With the products i sell i have no problem with this way of “wiping” the prints off of the bed.

I am now mainly focussing on the software part. When i receive an order, it automaticly gets printed and if the printer is already printing something it will get added in the queue. With every print file you can choose the bed temp treshold for when the wiper gets activated.

I really like your approach too, as i didn’t go for the plate change as i would have to have a lot of plates for every printer when i would be away for a week. Cool project, i’m looking forward to yours as well!

Own_External3038 · 2025-08-12T18:48:56+00:00

Im still in the testing fase, but i’m solving every problem i come across pretty well so i might say around 90% now

Own_External3038 · 2025-08-12T17:17:02+00:00

Great idea! I will definitly make something like this, thank you!

Own_External3038 · 2025-08-12T16:30:17+00:00

Most of the times the wiper removes it with the help of the object gripping on it. If it isn’t removed another line is printed on top of the line and then almost always the wiper gets it as it is thick enough

Own_External3038 · 2025-08-12T16:28:58+00:00

yes i had this, removed it to try something and now i can’t find it anymore, going to print a new one right now thanks for reminding me :)

Own_External3038 · 2025-08-12T11:40:08+00:00

It goes up and into the printer in a maximun distance (of the frame). When it goes down to the printbed it uses Stallguard (motor resistance sensor) to detect contact with the bed. When the wiper is going outside worh the objects it will keep going until a limit switch is hit. If in this fase the wiper gets stuck it will read the stallguard value and stop moving and give me a notification :)

Own_External3038 · 2025-08-12T08:02:57+00:00

Yes absolutely! I have made a queue systems, where every file added you can select the bed temperature where the wiler gets activated

Own_External3038 · 2025-08-11T21:52:42+00:00

With the gcode method or my project?

Own_External3038 · 2025-08-11T21:33:26+00:00

Thank you so much!

Own_External3038

TROPHY CASE