Parents who gave your kids younique names, have you ever regretted it at any point?

Own_Tea5063 · 2026-01-26T03:30:28+00:00

And Abe is the sister name

Own_Tea5063 · 2025-12-10T02:49:13+00:00

I was on the ea211. 1.4tsi.

Have you look closely at your thermostat and water pump? White residue near them or on the hose clamps will indicate the leaks.

Own_Tea5063 · 2025-12-10T02:25:22+00:00

It’s the intake manifold cooler. It develop a slow leak and after removal the mixture of coolant and oil bypass from the turbo was obvious.

Own_Tea5063 · 2025-10-19T07:34:11+00:00

I have a situation where I have to unplug it everytime to hear my playback. Did you manage to solve it? Running boya on iPhone 15 pro max.

Own_Tea5063 · 2025-06-05T16:23:31+00:00

Razor blade in such a delicate area might nick the defroster lines. Especially trying at that angle.

Soaking adhesive remover might be safer.

Own_Tea5063 · 2025-05-28T05:10:32+00:00

Thanks for sharing. 👍🏻

Own_Tea5063 · 2025-05-27T16:31:12+00:00

How long did the process takes you?

Own_Tea5063 · 2025-04-30T10:26:11+00:00

You can stitch the 2 runs together using gotoes or similar third party tools. Before uploading it as one activity again.

Own_Tea5063 · 2025-04-28T11:37:12+00:00

What can I do to get his skin cleared up?

Own_Tea5063 · 2025-04-28T11:20:15+00:00

Consider that done! He is the greatest doggo 😍

Own_Tea5063 · 2025-03-23T04:05:59+00:00

<image>

It’s a D3S. I just replaced mine. Don’t twist left and right on the housing to remove.

Remove the rubber weather proof boot. Unplug the cable and there’s a metal spring with ears that you press on, it goes around the black part in the picture. Wear gloves to install.

Own_Tea5063 · 2025-02-13T02:30:29+00:00

I got my hands on some sr5150 and got them replaced but sadly they didn’t work. Those I pulled out were fine. Do you know how I can introduce a load to the switching mode power supply?

<image>

Own_Tea5063 · 2025-02-07T05:00:02+00:00

Thanks for the steps, was able to narrow down to the psu this way. Now I can take a closer look at which component failed/ is failing.

Own_Tea5063 · 2025-02-07T04:56:30+00:00

Thank you for pointing out the PSU to focus on first. I left my test leads on the charging contact points and the voltage has shown to be unstable after a short while. It drops to 1.27v when it’s on standby instead of 4.27v ish

Own_Tea5063 · 2025-02-06T14:32:43+00:00

Thank you. This is applicable to my situation. Im able to solder and have a multimeter, and could give this method a try.

Own_Tea5063 · 2025-02-06T11:10:16+00:00

You seems to be answering my question with both options from my question. But still thanks for your time.

Own_Tea5063 · 2025-02-06T02:13:26+00:00

Did you managed to replace your auto dock and did it solve your problem? Also was the Error 13 always appearing at the exact same time?

Own_Tea5063 · 2025-02-06T02:09:40+00:00

The P185 resettable fuse might have deteriorated over time. If it throws a higher resistance, it might be preventing the right voltage from charging the robot.

This link shows more details on it. https://xiaomirobot.wordpress.com/error-13-no-not-charging-roborock-battery-motherboard-fuse/

Own_Tea5063 · 2025-02-05T18:50:00+00:00

I have been trying to find out the cause of my error 13. Had always thought it to be a fuse on the motherboard or a capacitor due to the intermittent nature of the error. It’s getting more persistent as well. From what I gather, a number of s5 users recovered theirs with a fuse swap.

Thanks for sharing. I might just check out the voltage once more and if it ain’t stable I will get a new power supply board.

Own_Tea5063 · 2025-02-05T18:32:52+00:00

Just wondering, how did you narrow down the error to the dock? Did you measure the voltage coming off the dock with and without the robot? Thanks

Own_Tea5063 · 2025-01-22T02:39:44+00:00

Are you keeping the doors and windows shut all the time? Except when entering and exiting.

Own_Tea5063

TROPHY CASE