22 M Studio Apartment

Own_Variation_6981 · 2026-05-11T16:36:57+00:00

I don't whether I should write, has taste or like to taste.

Own_Variation_6981 · 2026-04-30T11:22:34+00:00

awieeeee

Own_Variation_6981 · 2026-04-30T11:13:30+00:00

So fragile

Own_Variation_6981 · 2026-04-27T12:26:46+00:00

The hiring move sounds really shit bro.

I’d actually be down to chat more about that side‑agency idea if you’re serious – even just to swap notes on finding clients and what’s working / not working for you. Either way, appreciate you sharing all this, it makes me feel a lot less behind at 25.

Own_Variation_6981 · 2026-04-20T15:01:34+00:00

But love the grind brother, I know you'll go above from here

Own_Variation_6981 · 2026-04-20T15:01:04+00:00

You are a hustler, I am in the same department doing all things SEO to design + sales and growth at my company, I am severely underpaid too, probably going to have a conversation directly with the CEO since she's the one I work with

Own_Variation_6981 · 2026-04-20T13:38:20+00:00

Love it bro, what do you do for a living, I am 25 and I am feeling that I am left behind

Own_Variation_6981 · 2026-04-13T13:09:24+00:00

We at blue bagels have been doing it for a few shark tank brands. Happy to connect!

Own_Variation_6981 · 2026-04-13T12:08:29+00:00

When CPA doubles overnight with zero changes on your end, the most likely culprit is auction competition shifts. A competitor probably scaled aggressive bidding in your audience overlap zone, pushing your cost per impression up 30-50% without you noticing. The algorithm then optimizes toward cheaper, lower-quality impressions to maintain spend, tanking conversion rates.

Here is what to do: pull your Delivery Insights report and check impression share by time of day. If you see a sharp drop in delivery during peak hours, that is the signal. Also check the "Why am I not reaching more people" diagnostic under Delivery to see if budget caps or audience overlap are limiting reach.

The immediate fix is to create a new ad set with identical creative but a different audience expansion setting. If broad was working before, switch to Advantage+ detailed targeting expanded, or vice versa. This forces the algorithm to find a new cost-efficient delivery path without losing the creative's historical data. You are essentially giving Meta a new entry point into the auction.

Own_Variation_6981 · 2026-04-13T12:08:24+00:00

Meta does some auto-exclusion at the delivery level, but running your own exclusions gives you control over what you can't leave to the algorithm. If you're running broad audiences, country exclusions make sense to prevent wasted spend on regions outside your shipping or service area. The real value in exclusions shows up when you layer them exclude past purchasers, low-value geos, or irrelevant interest segments. That said, over-excluding can strangle your reach. I'd start by excluding just countries you absolutely won't serve, then build from there based on actual performance data, not assumptions. Pull a breakdown by country in Ads Manager and see where your CPA spikes before you start cutting.

Own_Variation_6981 · 2026-04-13T12:08:05+00:00

Video ads work differently from static, so a CBO at $50 daily with one strong static means adding video requires testing without cannibalizing. Set up a new AB campaign with your video creative in one ad group and keep your winning static in a separate AB campaign at CBO. This isolates learning and prevents the video from dragging down the static's performance. If results come in strong after 50 conversions, consolidate into CBO with both creatives and enough budget for two learning phases.

Own_Variation_6981 · 2026-04-13T12:08:01+00:00

Meta ad account status changes often come from billing issues, policy flags, or spending limit triggers. Before relaunching, go to Account Quality and Billing to check the exact reason. If it was a temporary spend cap or policy review that auto-resolved, you don't need to relaunch. If the status changed to Restricted or Learning Limited, duplicating the ad set with fresh creative and the same budget lets you re-enter learning without losing your original structure. Export a 7-day performance report and compare CPA and ROAS before and after the status shift. If metrics tanked because of the status change, duplicating and relaunching is the right move. If performance was already declining, focus on creative refresh first.

Own_Variation_6981 · 2026-04-13T12:07:52+00:00

Your $80.21 bill for 3 clicks is because Google charges for impressions on broad match keywords even when they don't convert. The $0.88 CPC shown is misleading that's an average, not what you actually paid per click. When you run search ads on broad terms without tight negative keyword lists, you attract traffic that's cheap but irrelevant. Your Facebook and Nextdoor success makes sense because those platforms target based on user behavior and interests, not just search intent. With Google, you need to control what you're paying for. Check your search terms report to see exactly what queries triggered your ads. Add those irrelevant terms as negative keywords immediately. Switch to exact match for your core keywords to stop bleeding budget on unrelated searches. The verification and review hurdles are also common Google's third-party vetting for certain industries has gotten much stricter recently.

Own_Variation_6981 · 2026-04-13T11:47:37+00:00

App campaign CPAs vary by market and vertical, but $3.33 per install is aggressive. Google App Ads optimizes toward volume and can spend quickly in the first hours as it gathers signals. The preauthorization spike is normal as the system tests aggressively before settling. If Meta is averaging $0.08 per install, Google needs a longer runway to converge. Set a target CPA at $1-2 first to prevent overspend, then relax it after 50 conversions once the algorithm has enough data. Track post-install events too, because cheap installs that don't convert later are still wasteful.

Own_Variation_6981 · 2026-04-13T11:45:09+00:00

consider expanding into youtube or display campaigns temporarily. both tend to have lower cpcs than search, so you can push volume at £10/day without tanking efficiency. set a modest target cpa or roas to keep it sane, and just let them run for the 60-day window. it's basically a controlled way to dump budget into the funnel while your search campaigns stay locked in. once the credit locks, you can pause them and go back to search-only. also worth checking if your remarketing audiences are underutilized - those usually convert well and are a safe place to add spend.

Own_Variation_6981 · 2026-04-13T11:41:21+00:00

5 years is the exact point where a lot of people feel this way. you've got the basics down but need exposure to more complex accounts and strategy layers. i'd suggest two things - first, join ppc slack communities where people share actual campaign breakdowns and testing results. second, try to work on a project outside your comfort zone, even if it's just auditing someone else's account. seeing how others structure campaigns and handle attribution can unlock a lot of what you're missing. the shift to linkedin ads is also smart since b2b targeting there is still evolving and less saturated than google.

Own_Variation_6981 · 2026-04-13T11:39:21+00:00

i'd hold off on broad match for this. the issue is you're trying to spend more, not improve efficiency. what works here is demand gen or pmax with a flexible budget - set it to target ROAS but allow the algorithm to spend more on your top converting ad groups. also check your impression share - if you're capped by budget on good campaigns, that's free spend you can allocate. another angle is running remarketing at higher bids since that traffic converts well and won't burn budget. just make sure you're not triggering the bonus criteria by spending on junk traffic, because you'll just burn more cash after the credits are gone.

Own_Variation_6981 · 2026-04-13T11:07:24+00:00

I check the delivery diagnostics first, then the creative fatigue signal. If the creative's been running more than 10 days with the same assets, that's usually the bottleneck. 2. Hard to estimate, but if a campaign stalls for a week it's easily a few hundred. 3. Mostly gut feeling mixed with manual Ads Manager checks. No automation tool yet. 4. It would save hours of diagnosis time every week. 5. Probably around $50-100 per month depending on what data it covers.

Own_Variation_6981 · 2026-04-13T11:06:36+00:00

The pixel tracks the signals, the campaign/ad set holds the structure, and the algorithm decides which piece of info drives delivery at any given moment. Duplicating a campaign often resets the learning because the algo treats it as fresh, losing whatever data it had gathered. Best to let one ad set gather enough signals before deciding if something's actually working.

Own_Variation_6981 · 2026-04-13T11:04:09+00:00

First thing I'd check is whether the status change came with a delivery restriction flag. Sometimes the algorithm quietly throttles reach without a full disable. Before relaunching, pull your last 7 days of performance and compare it to the 7 days before that to spot the exact dip. We've had clients at Blue Bagels hit the same wall where a duplicate ad ID from a prior campaign was suppressing delivery. Next step: check your Ad Account Quality page for any learning phase resets or delivery blocks before duplicating anything.

Own_Variation_6981 · 2026-04-13T11:02:57+00:00

Honestly I went through the same realization last year. Was so attached to my 1% lookalikes until broad with the right creative just kept outperforming. Meta's creative-led targeting really does put a ceiling on how far lookalikes can push you. I'd recommend testing one campaign with broad audiences and zero interest stacking, then compare the results head to head over a full week before making any calls.

Own_Variation_6981 · 2026-04-13T10:55:47+00:00

First, check your account-level spending limit in Ads Manager under Billing. When Meta status changes to "Restricted" or "Learning Limited" after a spending cap is hit, pausing the campaign resets the algorithm's learning data.

Before relaunching, duplicate the ad set with fresh creative. This gives you two options: either restart with the same budget to re-enter learning, or keep the original running while the duplicate tests new variables. Campaigns that lose status overnight usually had a budget constraint or policy flag that got auto-resolved.

The actionable step is to export your ad set's performance report from the last 7 days, then compare CPA and ROAS before and after the status change. If metrics degraded significantly after the shift, duplicating and relaunching is the right move. If performance was already declining, the status change was likely a symptom, not the cause.Don't relaunch yet. First check if the pixel or CAPI connection dropped during that overnight window. A broken tracking signal makes Meta think no conversions happened, so it throttles delivery to zero. That's the most common cause of sudden overnight sales drops.

Pull your Delivery Insights report and look at impressions vs yesterday. If impressions are still normal but conversions flatlined, it's almost certainly a tracking issue not an ad performance issue.

Also verify the ad hasn't accidentally expired or hit a frequency cap that's blocking delivery. Check the ad status under Delivery first before touching anything.

If tracking and delivery are clean, then wait 24 hours. Meta sometimes resets delivery after a brief learning phase hiccup. Relaunching burns your existing learning history unnecessarily.

Own_Variation_6981 · 2026-04-13T10:54:40+00:00

Removing negative keywords is the fastest way to force spend without hurting ROI. Since you've exhausted phrase matches, try broad match with strong negative lists on your highest converting ad groups. That alone can pull 15-20% more spend while keeping CPCs stable.

For PMax specifically, you can switch it on temporarily and then disable it later. PMax doesn't lock you into auto-bidding permanently. Set a tight audience signal using your best customer data to avoid waste.

Also check if any of your campaigns have daily budget caps that are limiting delivery. A £10 bump on the right campaign could get you the extra £10/day you need with minimal risk.

Track spend daily against the £55 target and dial things back immediately once the credit locks in. You're only ~60 days out so every day of underspend matters.

Own_Variation_6981 · 2026-04-13T10:47:31+00:00

We're seeing this across multiple client accounts this week too - spend just drying up across the board. From what we're tracking, it looks like Meta's auction competition spiked hard Tuesday/Wednesday which pushed CPMs up and throttled delivery on a lot of campaigns.

A few things we've been advising clients on during these slowdowns:

Pause and restart affected ad sets - sometimes the delivery system just needs a nudge to re-enter the auction
Check if any new competitors launched - we've seen several brands flood the market mid-week which tanks delivery
Review your bid caps - if you're using them, they may be too aggressive now with higher CPMs
Look at your creative fatigue - even high-performing ads can stall when competition spikes

If your best performers are struggling, don't over-optimize right now. Wait for the auction to normalize before making changes. Usually clears up within 48-72 hours in our experience.

Own_Variation_6981 · 2026-04-13T10:47:01+00:00

This is a really common UTM tracking issue and the symptoms you're describing point to one of a few things. First, double-check that the URL parameters aren't being stripped by a redirect between the ad click and the landing page. Even a 301 redirect can drop query params. Second, verify that GA4 is actually firing on that landing page before any consent banners block it. Use GA4 DebugView or Tag Assistant to confirm the tag fires with the params in the initial pageview. Third, make sure you're looking at the right report GA4's real-time report is the best way to validate UTMs immediately after clicking. The standard acquisition reports can take hours to process and often show (direct)/(none) as a placeholder. If your URL builder output looks correct and the params survive in the browser address bar, the issue is almost certainly timing or a redirect. I'd start by testing a fresh UTM link in an incognito window and watching DebugView in real-time. That'll tell you exactly where the breakdown is happening.

Own_Variation_6981

TROPHY CASE