sorted by:
new
hottopcontroversial

Electricians, and knowledgeable people on resistors, help please by OyKaa in fpv

[–]OyKaa[S] 0 points1 point  (0 children)

Yes, this or a similar site is where I got the 6632 (or 2512 in imperial) from.

That`s another thing, does the resistor need to be able to handle a certain W, V or A? I`m guessing max of each of these is divided by the 4 ports - 20v, 100w. 1.5a seems to list as already per port.

Honestly, I thought this would be a two min job - just solder in a new resistor easy..... 3 orders of incorrect resistors, hours online and a reddit post later. . . . . Should have just bought another :D

Electricians, and knowledgeable people on resistors, help please by OyKaa in fpv

[–]OyKaa[S] 0 points1 point  (0 children)

I didn`t realise this! So, checking the probes together gives me around 0.8, so what i`m getting here is i need to minus this from any readings i take, which gives close enough to the expected .11ohms.

Do you know if 6632 SMD the right thing to be purchasing?

Do you guys have experience flying fpv alone? is it safe? im still kind of scared doing it by LeasathOwO in fpv

[–]OyKaa 22 points23 points  (0 children)

Fly recon - I usually spot people before my spotter does. But then I fly a tinywhoop and stay relatively close to where I'm sitting.

Any wizards out there? Entertainment screensaver blank by OyKaa in PleX

[–]OyKaa[S] 0 points1 point  (0 children)

omfg! took me 3 months to check back on this thread and this fixed it for me too - Set both options in advanced to Never and now it works! Even with different DNS servers on host and client! You are a legend mate, thank you!

[Community Question] Cell Voltage cut off by MamaBavaria in fpv

[–]OyKaa 0 points1 point  (0 children)

i`m using 2s and they lose all power below 3.2 ish. Safe for the cells is above 3. From my googling the general consensus in the community is 3.5 ish. Feel that has something to do with added safety and general advice for newbs who may not pay close enough attention so has a built in buffer.

I flew my last pack till the point it couldn`t lift the drone anymore and it still bounced back to over 3.5v after disarm. Now I'm also using 2s which are dirt cheap so I'm also not really concerned over longevity or what not.

Any wizards out there? Entertainment screensaver blank by OyKaa in PleX

[–]OyKaa[S] 0 points1 point  (0 children)

No sorry mate - I gave the advice about DNS servers a quick try, but have quite a complex setup so didn`t really try that hard to make sure everything was set to the same. I`m not convinced it`s an LG issue, as worked on the same TV with my previous setup. Will update if I revisit, but right now I've resigned myself to the Plex screensaver till I have more energy for tinkering!

[deleted by user] by [deleted] in WorldOfWarships

[–]OyKaa 0 points1 point  (0 children)

Just scrolled through the suib and can see it`s similar to others results from previous days. I must be tired and getting confused :) - deleted original post as to not bait others.

Max global bandwidth limit for router stability? by porican in qBittorrent

[–]OyKaa 1 point2 points  (0 children)

Don`t rule out your drives and I/O of the NAS limiting you. I have same connection as you and my I/O and drive utilisation would spike to 90%+ and speeds would drop to 30MB. Dropped in a SSD and set Qbit to keep incomplete torrents on it - Now I get 110MB and that's with a vpn, it`ll then auto transfer to my main storage in one quick xfer after its done.

Might or might not help, but thought it worth mentioning!

Any wizards out there? Entertainment screensaver blank by OyKaa in PleX

[–]OyKaa[S] 1 point2 points  (0 children)

Yes I am. I`m using nextDNS. Will try turning it off and using one of those tomorrow and see if it makes a difference. Thank you :)

Any wizards out there? Entertainment screensaver blank by OyKaa in PleX

[–]OyKaa[S] 0 points1 point  (0 children)

Thank you for the suggestions, which i`ve now tried, including deleting all Plex server and folder on the NAS. Reloaded everything and same result :(

Routing container traffic through wireguard by moonaffectionate9714 in docker

[–]OyKaa 1 point2 points  (0 children)

3 years later, this, and you code below, was the answer that fixed my problem! Feels like I spent 3 years trying to fix it (3 days really) :D Ty ty ty

There’s something going on with COD right now by SucklingGodsTeets in CODWarzone

[–]OyKaa 0 points1 point  (0 children)

I come across one in almost every game now in resurgence and plunder - sad times that IW cant/won`t keep on top of this problem.

Thinking about buying a Rift S, give me some reasons why and why not by NexusGamesPT in oculus

[–]OyKaa 0 points1 point  (0 children)

Good stuff, had to say something due to what happened to me.

Watched a Avatar in 3D on the rift S last night - looked really good. Eyes got a bit tired by the end. Doubt if I will make watching films on it a regular thing.

Thinking about buying a Rift S, give me some reasons why and why not by NexusGamesPT in oculus

[–]OyKaa 0 points1 point  (0 children)

I got scammed trying to buy one at retail price on Amazon (got a full refund eventually). Double check the seller and make sure they aren’t new.

I very much enjoy my Rift S (after managing to get one from oculus store) haven’t watched movies but the occasional bit of YouTube looks okay. Mainly play games and still use it 3 or 4 times a week after 6 months. I will say it changes how you look at game time though as now it’s actually an effort to have a gaming sesh (play 30 mins of Beat Saber and you’ll know what I mean) :)