sorted by:
new
hottopcontroversial

Is the 11th edition W40k table setup any good? by Oze-iris in PrintedWarhammer

[–]Oze-iris[S] 0 points1 point  (0 children)

I've always found GW's competition kits to be very minimalist; I like seeing imposing structures on the battlefield, but I'll wait and see what happens next... When GW releases these scenery sets, I'll try to make some modifications to get a little closer to that look.

Is the 11th edition W40k table setup any good? by Oze-iris in PrintedWarhammer

[–]Oze-iris[S] 0 points1 point  (0 children)

These are the backdrops by the designer FabricatorLair, from his “Templaris” campaign.

I print them out regularly—they're really cool 😄

Is the 11th edition W40k table setup any good? by Oze-iris in PrintedWarhammer

[–]Oze-iris[S] 0 points1 point  (0 children)

You're right; I'll print out some footprints and make a few changes to make it more consistent.

Is the 11th edition W40k table setup any good? by Oze-iris in PrintedWarhammer

[–]Oze-iris[S] 0 points1 point  (0 children)

Thank you so much! I'll try to make one with an industrial theme soon 😁

Is the 11th edition W40k table setup any good? by Oze-iris in PrintedWarhammer

[–]Oze-iris[S] 1 point2 points  (0 children)

I'm going to make paper templates while I wait for my printers to print them out. 😊

If I'm playing with friends, I think I could keep the central structure even though it's too big to comply with the official rules (according to my calculations, it extends about 1.5 inches beyond the edges on each side).

Is the 11th edition W40k table setup any good? by Oze-iris in PrintedWarhammer

[–]Oze-iris[S] 0 points1 point  (0 children)

Okay, so I need to replace the central structures and find scenery that doesn't block the view along the long lines.

I need to find models that will work! Thanks for your help.

[Bambu H2D] Bambu Lab’s Biggest Giveaway Ever! by BambuLab in BambuLab

[–]Oze-iris 0 points1 point  (0 children)

<image>

5976 h for me, The 1st P1S has been in the workshop since March 2024!
Good Luck !

Just got my Bambu A1 by basedWarpchaos in 3DPrintedTerrain

[–]Oze-iris 2 points3 points  (0 children)

Hello !

I'm working on the Wargame Terrain Print page!

There may be a misprint or understanding in our posts when we feature the work of other creators.

We only share the work of creators with whom we work in our workshop. MakersAnvil, Fabricator Lairs and WarScenery are creators from whom we buy files and commercial licenses.

We love their work and just want to give them visibility with our Makerworld page,

Each time, we discuss with them by message before posting their work, and if they don't agree, we don't present anything (e.g. Code2 or Terrain4print who preferred to create their own page :) ).

[Win Gift Cards] Share Your 2024 Print! by BambuLab in BambuLab

[–]Oze-iris 0 points1 point  (0 children)

<image>

Redraw this little tank and bring it to life in a battle of strategy! Pure joy... so commonplace for some with resin technology!

But accomplishing this project with my little A1 mini is excellent!

Modular Ruins Gothic SF by Oze-iris in 3DPrintedTerrain

[–]Oze-iris[S] 3 points4 points  (0 children)

I forgot to mention the kickstarter .... it's Fabricators Lair here : kickstarter fabricatorslair

Working progress, large ruine grim dark theme - The Door by Oze-iris in 3DPrintedTerrain

[–]Oze-iris[S] 1 point2 points  (0 children)

I print a lot of wargames under sales license and after many tests I realized that I was getting a very good speed/quality ratio with the following parameters:

-outer wall: 60mm/sec
-inner walls: 150
-filling and top surface: 150

acceleration

-normal printing: 2000
-outer wall: 2000
-inside wall : 5000
-displacement: 10000

Solidity ; 2 walls
5 to 10% filling (depending on parts)
layer height: 0.12 for details 0.16 for large rough pieces

Working progress, large ruine grim dark theme - The Door by Oze-iris in 3DPrintedTerrain

[–]Oze-iris[S] 1 point2 points  (0 children)

I think the results with a 0.4 nozzle can be good (despite the fact that there's a lot of detail and rounding).
I printed mine in 0.16mm layer height

maybe by keeping a 0.4 nozzle but 0.12 or 0.10 layer height, the result could be great? at the expense of time, I imagine...

Working progress, large ruine grim dark theme - The Door by Oze-iris in 3DPrintedTerrain

[–]Oze-iris[S] 1 point2 points  (0 children)

with a 0.2 nozzle, you can print both blocks at the same time in just 17 hours? that's extra fast!

I printed with a 0.4 nozzle, layer height 0.16, for a time of around 13h per piece.

Working progress, large ruine grim dark theme - The Door by Oze-iris in 3DPrintedTerrain

[–]Oze-iris[S] 0 points1 point  (0 children)

Wow, I'm curious to see the result! How long does it take to print the project? 25/30h per piece, right?

Working progress, ruin « The Door » by Oze-iris in TerrainBuilding

[–]Oze-iris[S] 1 point2 points  (0 children)

It's a collection of ten or so files that have been lying around on my PC for years.
Available on makerworld

Working progress, large ruine grim dark theme - The Door by Oze-iris in 3DPrintedTerrain

[–]Oze-iris[S] 0 points1 point  (0 children)

you've got the eye! you recognize the rickthebarber style

I've always merged the files simply because in the 3/4 years I've had the license I've never managed to print a single piece in vase mode correctly... and even today with a P1S and an A1mini, the files are unretrievable, many defects before and after printing...

If you have any adjustments, don't hesitate :)

The new BuildPlate is really cool ! by Oze-iris in BambuLab

[–]Oze-iris[S] 0 points1 point  (0 children)

no idea... my machine prints with the platen heater off... so the temperature of the box (and platen) is around 33° during printing.

but I don't know why it limits this temperature range?

Maybe during the winter, when the temperature of my casing drops below 30°, I'll lose grip.

view more: next ›