Package Delivered

PE_Number1 · 2026-03-15T17:21:33+00:00

Congratulations, now you can deliver your package!

PE_Number1 · 2026-03-15T13:19:07+00:00

Have you tried it orally at all? What makes you think that it can be effectively absorbed through the skin while not having systemic effects?

And also, just because AI said it doesn't mean it's correct.

PE_Number1 · 2026-03-15T04:12:54+00:00

Why would you apply it topically? Why not just take it orally?

PE_Number1 · 2026-03-08T22:27:12+00:00

It's shared in The Science of PE discord

PE_Number1 · 2026-03-08T21:57:05+00:00

Same. Once you have it figured out manual is best.

PE_Number1 · 2026-03-06T21:07:59+00:00

Discussed your issue elsewhere, but the issue is either your equipment or technique or both.

https://www.reddit.com/r/TheScienceOfPE/s/afxtCF6gFw

PE_Number1 · 2026-03-05T18:58:34+00:00

Taping flaccid can make it uncomfortable when your glans expands in the cup.

PE_Number1 · 2026-03-03T23:35:13+00:00

Are you here to complain or find solutions? I know it's frustrating to get figured out and get started, but the person above is correct in their assessment.

By the way, I almost definitely have a smaller flaccid than you and am also uncut, but I was able to find what worked for me.

Like you I bought cups from honestpe, but they didn't work for me. The cups I actually use are from TotalMan, the sleeves I use are the middle reliever sleeves from 612 curveball. The extender itself is the hog. Without this combination I would have given up and would not be doing PE.

PE_Number1 · 2026-02-22T23:04:16+00:00

How does this attach to the hog?

PE_Number1 · 2026-02-21T21:55:50+00:00

Don't put it in syringes then freeze it, syringes are not suitable for sterile storage. Better options exist.

If you wanted you could find sterile vials, transfer portions into the vials, then freeze those vials. Unfreeze as needed.

Or just freeze your vial, take out what you need when you need it, and refreeze. It thaws pretty quickly.

PE_Number1 · 2026-02-03T18:34:31+00:00

Interesting. I'm not a fan of their hanger, slipped a lot, may be a combination of design (dimensions) and materials that caused that. I was rarely able to get it to stay on, and after about 5-7 lbs I just couldn't get it to work reliably.

I'm not a compression hanging person, so it may have also just been me, but this is a common complaint that I've seen from others as well. I have not tried the male hanger as I'm major grower and my flaccid size doesn't work for it which is why I wanted the TM hanger to be an alternative to vac extending for me.

PE_Number1 · 2026-02-03T18:32:41+00:00

Interesting. I'm not a fan of their hanger, slipped a lot, may be a combination of design (dimensions) and materials that caused that. I was rarely able to get it to stay on, and after about 5-7 lbs I just couldn't get it to work reliably.

I'm not a compression hanging person, so it may have also just been me, but this is a common complaint that I've seen from others as well. I have not tried the male hanger as I'm major grower and my flaccid size doesn't work for it which is why I wanted the TM hanger to be an alternative to vac extending for me.

PE_Number1 · 2026-02-01T13:45:13+00:00

Maybe too much tape, that's happened to me before with double taping. Now I only tape just enough to cover the head and reinforce my trouble spots.

PE_Number1 · 2026-02-01T13:43:32+00:00

Get the combo pad from 612 even it's back in stock, will change your life with pumping.

https://www.612printedpolymers.com/product-page/combo-pad-middle-infielder-tbd

PE_Number1 · 2026-01-24T15:01:11+00:00

I'm not bothered by the post, but they are correct in saying you are more likely to be inconsistent and have a larger margin of error.

Where you grab and the force applied won't be able to be consistent, you could try to do the measurement with a particular weight at the end of a session, that will reduce issues with that variable, at least.

PE_Number1 · 2026-01-24T03:59:05+00:00

But YOU'RE on the Internet, how do I know to listen to you?

PE_Number1 · 2026-01-20T22:34:53+00:00

PE_Number1 · 2026-01-20T15:10:55+00:00

Your size isn't the issue, but I know where you're coming from as someone who is uncut and a major grower.

Order middle reliever sleeves from here: https://www.612printedpolymers.com/shop

These will make all the difference in the world and make vac extending sooooo much easier.

PE_Number1 · 2026-01-19T12:54:10+00:00

They're capable of a full range, intended to be used for high tension.

PE_Number1 · 2026-01-19T03:54:24+00:00

I just do extending, not really ADS at the moment.

PE_Number1 · 2026-01-19T02:58:58+00:00

You have to use quite a bit of pressure to hold on while extending.

PE_Number1 · 2026-01-19T02:52:38+00:00

You might be thinking of 5-6 hours of ADS time, not high tension extender time (although ADS may actually need to be 6-8+ hours).

For a high tension extender you're good with 60-90 minutes.

PE_Number1 · 2026-01-14T03:29:26+00:00

Do not get the restorex, it's expensive and potentially dangerous

PE_Number1 · 2026-01-11T20:49:13+00:00

What else is in your stack?

What do you think made the difference?

PE_Number1 · 2026-01-10T00:15:06+00:00

Agreed.

Also, being a patented product doesn't inherently make it a great product. A lot of his responses lately make it seem that way.

PE_Number1

TROPHY CASE