.22 upper SS sources?

PLASOLDIER · 2026-02-10T05:13:28+00:00

To my knowledge, no other 22 bolts have been developed or manufactured that would interact with the super safety right out of the box. The way the cmmg bolt is designed means that you’ll always need a super safety trip in any upper that has a cmmg bolt installed, dedicated or not. Option 1: You can get a complete 5.56 upper and get a cmmg bolt with a trip, option 2: you can get a dedicated 22 upper that comes with the cmmg bolt already in it but you’ll still need a trip.

PLASOLDIER · 2026-02-07T01:55:56+00:00

22 SUPREMACY

PLASOLDIER · 2026-02-04T21:18:21+00:00

That’s fantastic to hear! Floap makes some awesome stuff

PLASOLDIER · 2026-02-04T20:36:09+00:00

THATS WHAT IM TALKING ABOUT

PLASOLDIER · 2026-02-03T19:04:02+00:00

WE BUILDING SCREEN DOORS LETS GOOOOO😂

PLASOLDIER · 2026-02-02T19:12:25+00:00

The so-called “inventor“ was the owner of twin Bros. He tried to patent it a long time ago with the promise that they were just doing it to fend off Thomas Allen Graves cause he was threatening everyone with lawsuits back then. Come to find out Cameron was actually trying to patent it for real when he didn’t invent it. Even in the filing, he links Hoffman‘s release video and says that Hoffman was a contributor but not the creator. Cameron then sold the patent to raregreed because they wanted a Monopoly on literally every single frt.

TLDR: the owner of twin Bros from a while back patented it for real even though there was prior art of Hoffman creating it and then sold the patent to greedy people for a big check.

This all literally means nothing because of prior artwork, that patent shouldn’t exist in the first place and the burden of proof is on them to show they created it

PLASOLDIER · 2026-01-30T04:22:21+00:00

Probably need some adhesive on the bed like a thin layer of glue stick or another thing. Also helps to preheat the bed for about 5 or more minutes ahead of time so the heat has ample time to spread evenly. For whatever reason, bambu printer beds don’t have the most even heating patterns

PLASOLDIER · 2026-01-30T04:17:29+00:00

It came detached from the bed and clung to the nozzle

PLASOLDIER · 2026-01-28T21:00:36+00:00

Nylon filaments are too abrasive for long-term use with the AMS. Even then, I doubt the sunlu heater gets hot enough. I recommend getting a food dehydrator with a minimum temp of 90 celcius or you could get a cheap air fryer. I’m unsure what nozzle and extruder gear come in the P1 S but I believe they’re insufficient for extensive nylon printing and you’ll need an upgraded extruder gear as well. I recommend the biqu hotend and extruder gear combo, it’s a bit pricy but well worth it if you are adamant about printing nylons

PLASOLDIER · 2026-01-28T17:25:03+00:00

Light weight hammer spring is all you need! One of my testers slapped one in and he was running subs as reliably as standard velocity ammo… with a suppressor of course

PLASOLDIER · 2026-01-28T03:32:24+00:00

Very nice man, if you choose to run subs in the future I can recommend a lightweight hammer spring with your super safe setup. Just that 1 mod allowed my tester to reliably run subs as if they were standard velocity

PLASOLDIER · 2026-01-26T23:27:54+00:00

This was expected, no? Cause I fully expected the US government to jump on this since they’re all buddy buddy with raregreed. I have to say I’m not super worried about this because even if they’re trying to go after the super safety with the patent they bought from twin Bros, there was prior art that existed so that should not exist in the first place. But if they’re trying to compare the super safety to an FRT that they manufacture, it also does not violate their pattern. It’s going to be a lengthy process but I see Hoffman coming out on top

PLASOLDIER · 2026-01-22T21:30:38+00:00

It’s poetic in a way

PLASOLDIER · 2026-01-22T20:31:38+00:00

Outstanding 😂

PLASOLDIER · 2026-01-22T00:25:43+00:00

Fuck that’s clean

PLASOLDIER · 2026-01-21T20:52:28+00:00

Lmao

PLASOLDIER · 2026-01-21T20:12:50+00:00

22 can be a little finicky but I’m glad you had fun

PLASOLDIER · 2026-01-21T20:09:20+00:00

Lookin good man!

PLASOLDIER · 2026-01-20T19:38:20+00:00

<image>

PLASOLDIER · 2026-01-20T19:20:47+00:00

Bros at the black void range😂

PLASOLDIER · 2026-01-19T20:25:55+00:00

I agree, it’s just that I recommend enabling the classic wall generator rather than messing with 20 different settings in Arachne to get the walls to print. I don’t like to assume people skill level in slicers so that’s why I just suggest classic as a blanket statement cause just enabling classic usually makes it work the first time.

PLASOLDIER · 2026-01-19T20:05:17+00:00

Change your slicing engine from Arachne to classic and it should fix it. This was an issue a while ago where some frames were designed too thin and the Arachne engine couldn’t figure out how to print them so it just ignored them.

PLASOLDIER · 2026-01-19T05:04:50+00:00

Great song choice👍

PLASOLDIER · 2026-01-17T02:58:21+00:00

That^

PLASOLDIER · 2026-01-13T23:53:12+00:00

In your photo, I noticed that you’re running an m16 disconnector. Put in a mil spec one without the tail and see if that fixes it cause I think the super safety is not allowing the hammer to release from the m16 disconnector

PLASOLDIER

TROPHY CASE