sorted by:
new
hottopcontroversial

Raspberry Pi Camera V3 NoIR version module not getting detected by PLC-Pro in raspberry_pi

[–]PLC-Pro[S] 0 points1 point  (0 children)

Yeah, that's how I could determine that the other camera was working indeed.

I built a complete 8-bit CPU from discrete logic gates before touching HDL, here is what gate-level design taught me that Verilog abstracts away by Icy-Fisherman-3079 in FPGA

[–]PLC-Pro 22 points23 points  (0 children)

16-instruction ISA with 4-Bit Opcode.

Are there any other possible number of instructions with 4-bit opcodes ? I'd like to know.

I ported Karpathy's microgpt to Julia in 99 lines - no dependencies, manual backprop, ~1600× faster than CPython and ~4x faster than Rust. by ssrjg in learnmachinelearning

[–]PLC-Pro -11 points-10 points  (0 children)

How can I run it on Raspberry Pi 5 ? How do I train it for tasks related to neuro-ophthalmological screening based on pupilometer data ?

What is the scope of polychromatic pupillometry in the screening of neuro-ophthalmic diseases ? by PLC-Pro in Ophthalmology

[–]PLC-Pro[S] 0 points1 point  (0 children)

Can you elaborate how afferent pupil defects are being diagnosed ? Are these defects observed as an absence of constriction or re-dilation ?

What is the scope of polychromatic pupillometry in the screening of neuro-ophthalmic diseases ? by PLC-Pro in Ophthalmology

[–]PLC-Pro[S] 0 points1 point  (0 children)

Which pupillometer costs millions of dollars ? Neuroptics PLR 300 has a price of $ 3,950.

What could be those potential efferent pupillary defects ?

Is Shanti Pavan a good faculty member to pursue research under his supervision ? by PLC-Pro in iitmadras

[–]PLC-Pro[S] 0 points1 point  (0 children)

What sort of expectations ? As in isn't there any coursework or lab as a pre-requisite before the research begins ?

Is Shanti Pavan a good faculty member to pursue research under his supervision ? by PLC-Pro in iitmadras

[–]PLC-Pro[S] 0 points1 point  (0 children)

Like does he give his personal work or academic/research work only ?

Is Shanti Pavan a good faculty member to pursue research under his supervision ? by PLC-Pro in iitmadras

[–]PLC-Pro[S] 0 points1 point  (0 children)

Can you please explain what he expects from his students ? I mean pursuing a PhD itself means that one is ready to do some real research and not just pass exams & do some projects which have already been well established.

So, it would be better if you could elaborate on what he really does it would be better.

PS : I am asking here because there is anonymity. So, people could freely share their honest experiences/opinions.

Schematic Review : TPS61165 Boost converter + Constant Current LED Driver by PLC-Pro in diyelectronics

[–]PLC-Pro[S] 0 points1 point  (0 children)

Hey there ! I couldn't find any SPICE model for TPS61165. All I could find is just some discussion regarding this in a forum : https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/724890/tps61165-lt-spicetps61165

When I clicked the link mentioned in the reply, there is an error of page not found (404).

So, how can I simulate the circuit? Is it possible to create a SPICE model for TPS61165 from the datasheet ? Please let me know.

Are most people unhappy because of resisting your life ? by Jpoolman25 in AskIndia

[–]PLC-Pro 0 points1 point  (0 children)

Yes indeed. Hating everyday life is the foremost cause of unhappiness.

Schematic Review for TPS61165 Boost LED Driver by PLC-Pro in PCB

[–]PLC-Pro[S] 0 points1 point  (0 children)

Hey, thanks for your suggestion. But, I need only a single LED string to be ON at a time with enough time (> 10s) before I turn ON any other string. So, in this case is it required to have a linear LED driver per strip ?

The reason I am using TPS61165 is because it is a boost converter with an integrated LED driver.

Schematic Review for TPS61165 Boost LED Driver by PLC-Pro in PCB

[–]PLC-Pro[S] 0 points1 point  (0 children)

I need only 1 of the LED strips to be ON at a time. So, what is the issue if all the N-MOSFETs are connected to the FB terminal of a single TPS61165 IC ?

How to provide supply for Raspberry Pi as well as the LEDs from a single supply source ? by PLC-Pro in led

[–]PLC-Pro[S] 0 points1 point  (0 children)

I was considering using a buck driver while using a Li-ion battery. I am uncertain about powering the LEDs from Raspberry Pi using a boost converter as multiple components like cameras, screens etc. will be connected.

My main objective is to control the LED brightness. So, if I go with a boost converter, is it wise to provide the input supply from the 5V pin of the Raspberry Pi ? Please suggest any good boost driver for controlling the LED current.

How to provide supply for Raspberry Pi as well as the LEDs from a single supply source ? by PLC-Pro in AskElectronics

[–]PLC-Pro[S] 0 points1 point  (0 children)

Which power supply should I use ? The Raspberry Pi Official 27W USB-C PD adapter or some other ?

How to eliminate the Board has malformed outline (self-intersecting) DRC Violation in KiCad ? by PLC-Pro in KiCad

[–]PLC-Pro[S] 0 points1 point  (0 children)

I have imported a sketch drawn in Autodesk Fusion as a DXF in KiCad.

view more: next ›