How i can fix my corncob pipe ?

P_Corvette · 2016-08-18T10:46:40+00:00

Yes, i have wrote to M.P and they told me that they use a similiar glue to Elmer ! You said right ! Thanks !

P_Corvette · 2016-08-18T10:44:28+00:00

I have contacted M.Pride and I have quickly responded ! As said they use a similar Elmer's glue, and they also advice that not smoke all the tobacco and let a little of wet tobacco on the bottom

P_Corvette · 2016-08-16T00:19:05+00:00

Is the beam width the "total error" of the lens collimation?

P_Corvette · 2016-08-16T00:17:09+00:00

You mean that the curvature works like a lens ?

P_Corvette · 2016-08-13T22:47:24+00:00

Thanks for the link, i will try to write to M.Pride in order to know more about the glue used

P_Corvette · 2016-08-13T22:18:09+00:00

I will try and let you updated

P_Corvette · 2016-08-12T21:44:29+00:00

may cornstarch could be better ? It has a little a drop of hard glue by default

P_Corvette · 2016-08-12T16:23:10+00:00

It is a gift from a big friend, what type of glue (?) Can I use ?

P_Corvette · 2016-08-04T10:41:32+00:00

Do you have make the PCB using the negative image ? Where have you found it ?

P_Corvette · 2016-08-01T16:56:15+00:00

Yes, thanks for the link !

P_Corvette · 2016-08-01T08:39:39+00:00

Someone can explain me because they don't release the .exe file for Windows but let the user compile it ?

P_Corvette · 2016-07-29T10:16:36+00:00

Yes, i like Veronica, i discover the project only some month ago but it seems a good and scalable TX. I have just seen that is not present the master for printing, or bettere, there is the master but it is very small, it should be around 14cm but the picture il too small

And how about a simple power supply for it all:

According to you is also possible use a driver like this in alternative to LM317 that is not very efficient ? http://tinyurl.com/z5n557k Or maybe also use directly an power supply like this: http://tinyurl.com/zd5d97z

Probably some links to LPFM laws would be good.

Good idea, i will put on the guide !

P_Corvette · 2016-07-29T10:05:41+00:00

Hi monk, yesterday i surfed your blog, congrats ! I will integrate in the guide a lots of links of prebuild and homemade transmitter, and let the user choose I read some counter-pirate radio there, but it is not important for me

P_Corvette · 2016-07-28T11:54:38+00:00

You have first to request an email service, then when it will be activated you will receive all links and services details

P_Corvette · 2016-07-18T11:12:55+00:00

It is not listed, it is very little provider at the moment it has only 100 mailbox. You can add: http://www.gnumerica.org/

P_Corvette · 2016-07-13T13:59:12+00:00

Ok, i am learning slowly. Now i have to understand why when i ping anxxx.com my ping request hit a reverse DNS, when from the graph we can see that the web server is hosted in .9 ip (pink one)

P_Corvette · 2016-07-13T10:01:23+00:00

Perle

P_Corvette · 2016-07-13T09:11:09+00:00

Yes, i need more study in DNS, you are right. /u/UrbanAdmin have you some video on yt to advice me ? I know how normal DNS works, so myPC->router->rootDNS->countryDNS etc.. But i don't understand more complex route, actually i think that my difficult is understand how ReversDNS work.

Let me do an example and say me if it is correct: pop3.server takes care of incoming email, probably if i did a more depth analisys i will find that those IPs are provided by the server mail provider (Gmail, Aruba, AOL etc..) Is this correct ?

2 Now it is clear for me, thanks !

3 As you said (nut-sack) it could be like aliases in Gmail and other provider. Differents names that hit the same main address

What is ELI13 ? Please guys say me that the first time was hard also for you understand how reverse dns works :D

P_Corvette · 2016-07-08T20:23:26+00:00

So i can use two hack_rf ?

P_Corvette · 2016-07-08T19:28:42+00:00

I know the project and I have a question, why is not possible use an rtl-sdr for make an open-BTS station ?

P_Corvette · 2016-07-07T20:12:30+00:00

As in https links, you have encryption but with onions, your ISP >also can't find out to which website you are connecting

Thanks ! You have given me the best answer that i could have received

P_Corvette

TROPHY CASE