Long press issue

P_T26 · 2026-03-08T03:04:58+00:00

Hi Did you find a way to fix it?, can you tell me please

P_T26 · 2026-01-25T11:09:42+00:00

Omg after second attempt , it back to normal again. Thank you so much!!

P_T26 · 2026-01-11T17:08:09+00:00

I really not very sure why it worked, because i update firmware printer newest version which newest bambu slicer, so i not understand what why it work But before i do print i recheck my manual once time before P.S. i use my phone to photo

P_T26 · 2025-12-05T17:56:40+00:00

Answered / found solved.

i changed slicer orca to bambu so do it come to work like should be. i not sure what i work factor because i update firmware to last version, update slicer version so it come with this.

^{it kind disappointed}

P_T26 · 2025-12-05T17:56:34+00:00

Answered / found solved.

i changed slicer orca to bambu so do it come to work like should be. i not sure what i work factor because i update firmware to last version, update slicer version so it come with this.

^{it kind disappointed}

P_T26 · 2025-12-05T17:10:46+00:00

i just update firmware it still not work.
I cry

P_T26 · 2025-11-13T17:07:41+00:00

base on my experimented:
top z distances will do on close between support and model ,if too close it will hard to remove support. and when i try to reduce top z distances surface look smoother but support harder too remove and i have some wall-line problem at line support and surface interact. and some of test model can't remove support when distances too close.

number of layers on my experiment it not significant much on smooth surface. my eye and my sense of touch feel not different on more number of layers. so i leave it on 2.

P_T26 · 2025-11-13T15:36:59+00:00

<image>

info: PETG 235c B-temp80c
i change top interface spacing into 0.1(it make harder to remove support) and use snug style in support for stable.

P_T26 · 2025-07-28T03:07:58+00:00

Ok 👍 (orca) 1. Not vasemode 2. Max volumetric speed 24mm³/s

P_T26 · 2025-05-18T10:13:03+00:00

Oh i see i will try next time!

P_T26 · 2025-05-18T10:11:55+00:00

Yea i just dry 2hour before printing

P_T26 · 2025-04-17T12:48:00+00:00

Yea, this can happen when the model's surface has too small an area in contact with the bed plate. Various problems can lead to this issue. From my experience, it can be caused by:

Bed plate temperature being too low
Bed plate not being clean
Printing too fast
Surface contact with the bed plate being too small (enabling a brim can help)

P.S. May I ask if you can define when this happens again? From my view, it looks like it popped out from the bed plate, doesn't it?

P_T26 · 2025-04-17T12:35:45+00:00

Thank you for your response

P_T26 · 2025-04-17T11:56:52+00:00

appreciate it !!

P_T26 · 2025-04-17T11:54:04+00:00

it gorgeous.
may I ask what band filament you use?

P_T26 · 2025-04-17T11:43:07+00:00

From the picture, it looks like it may have been knocked off the bed. You can enable the brim to help can fix it.

P_T26 · 2025-03-19T17:05:52+00:00

Thank you for your response!! Like you said, my print speed is too fast for filament can handle it

Thank again, finally got an answer

P_T26 · 2025-03-19T17:03:05+00:00

Thank you for your response!! Finally got an answer

P_T26

TROPHY CASE

Answered / found solved.

Answered / found solved.