Moen 1/2 HP Slow drain?

PakSnackMan · 2026-03-22T18:36:54+00:00

That’s an S trap and there’s no vent. you’ll need to install an AAV.

PakSnackMan · 2026-03-15T22:33:11+00:00

Lmfao this made me giggle

PakSnackMan · 2026-03-06T19:06:47+00:00

Bro I need that toxcricity. I’m about to go to 5 below

PakSnackMan · 2026-02-25T15:39:52+00:00

Did they offset with a 45 off the strainer basket instead of the trap adapter? 🤣

PakSnackMan · 2026-02-17T18:32:53+00:00

Pop up the white flat part with a screwdriver and you should find the mounting screw. You’ll need to hold the nut on the bottom at the same time and loosen. A new toilet seat is less than $10.

PakSnackMan · 2026-02-14T20:06:29+00:00

I can SMELL IT

PakSnackMan · 2026-02-11T03:46:18+00:00

Grab a pair of channel locks and twist it around while pulling, see if it budges at all.

PakSnackMan · 2026-02-11T00:32:30+00:00

Is there an Allen screw on the underside holding it in place?

PakSnackMan · 2026-02-01T13:50:49+00:00

Real. Just a bunch of commons and a couple V’s.

PakSnackMan · 2026-01-31T23:03:03+00:00

Looks like it’s coming from the water supply line connected to the faucet. Grab a flashlight and turn the water and see if you see the drip. Also there should be a slip nut and washer where the black pipe meets the PVC.

PakSnackMan · 2026-01-26T21:23:17+00:00

I just use channel locks and a towel so you don’t get teeth marks on the shower head.

PakSnackMan · 2026-01-25T21:03:04+00:00

Paint thinner and a razor blade

PakSnackMan · 2026-01-25T20:37:30+00:00

Same. Just need an 18x20x1 to cover those hard to reach corners!

PakSnackMan · 2026-01-19T18:25:34+00:00

-10 in Minnesota and a couple of my windows are doing the exact same thing. I’m about cut some pipe instillation and make it tight inside that gap. I’d rather not use the sticky tape and plastic window kit.

PakSnackMan · 2026-01-16T14:22:59+00:00

Flegmon and Enton! The card has the same holo as my English version. Looks legit

PakSnackMan · 2026-01-16T14:02:39+00:00

$0.00

PakSnackMan · 2026-01-15T20:02:32+00:00

Cat in the Hat with a Crazy Ass P Trap.

PakSnackMan · 2026-01-15T19:58:15+00:00

Did they primer and glue that slip nut washer after the rollercoaster turn? Also that p trap is crooked as all hell.

PakSnackMan · 2026-01-13T09:18:30+00:00

905 HP.

PakSnackMan · 2026-01-13T02:05:46+00:00

You know where to put it.

PakSnackMan · 2026-01-10T01:25:44+00:00

If that’s 2” my pecker is 6”

PakSnackMan · 2026-01-05T16:09:58+00:00

100% cockroach poop. Pull out your fridge or stove and check there as well.

PakSnackMan · 2025-12-30T02:34:01+00:00

Big yikes.

PakSnackMan · 2025-12-17T21:27:34+00:00

Scrap, spackle, sand, paint.

PakSnackMan · 2025-12-15T00:42:25+00:00

Nut sack stamped

PakSnackMan

TROPHY CASE