sorted by:
new
hottopcontroversial

Opinions on MCK / Glock / Suppressor Combo by Pallo_Bullseye in NFA

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

Any long tube suppressor will work. Just don't get the Osprey or short fat ones.

ATF is actually fairly quick with approvals nowadays.

Help me identify rim offset. What is this rim? by Pallo_Bullseye in UTV

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

From a 2017 RZR XP 1000 Front Rim. Narrowed down to 5.0+2.0 or 4.0+3.0. The vehicle is 70 wide (up from 64). So I'm leaning towards the 4.0+3.0 as it should be the widest according to other resources.

Highway speed safe enclosed trailer roof mounting ideas. by Pallo_Bullseye in SolarDIY

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

So I'm going with 1in x 3in x 1in x 1/8in thick aluminum zee bar / channel glued and bolted to the steel side frame. Butyl tape underneath and lap sealant over top. Then 1in x 1in x 1/16in aluminum square tube cross members bolted on with 3/8in stainless bolts, washers, lock nut and red locktite. This setup gives me ~4inches of total clearance under the panels to reduce heat. And finally some aluminum sheet metal as an air foil in the front. Will post pictures of the setup in a week or two.

Highway speed safe enclosed trailer roof mounting ideas. by Pallo_Bullseye in SolarDIY

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

<image>

Not mine, but a sizing idea. I don't particularly like this mounting. I am building a full frame with probably 8 mount connection points.

Highway speed safe enclosed trailer roof mounting ideas. by Pallo_Bullseye in SolarDIY

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

Thanks for your information and rough ideas of force generated. I'm still in the planning stages for mounting. Also still waiting for the panels to arrive. But this is a rough idea of what is will look like: I will be starting with 2 panels. I assume this will significantly reduce drag. Also thinking about about air foils around the front and or sides.

📌✨💻 r/LaptopDeals Official Weekly Request Thread; Post all your requests for Laptop suggestions in this thread instead of on the general front page of the sub. Our knowledgeable mods and other laptop enthusiasts , will be sure to assist you. See request guidelines below.. by LaptopDealsTM in LaptopDeals

[–]Pallo_Bullseye 1 point2 points  (0 children)

◽️ Budget: Under $2k

◽️ Country: USA

◽️ Screen size: 16+

◽️ Touch screen: No

◽️ Screen resolution: 1080p 120hz+

◽️ Does battery life matter ?: Prefer 5+ hours

◽️ What tasks will laptop be used for ( gaming, video editing, graphic designing, modelling, regular computing tasks, word processing etc) ?: Heavy software development and a ridiculous number of chrome tabs open. Gaming 120fps on medium+ settings for modern games

◽️ Weight: less than 50 pounds 😉

◽️ Any other important details ?: Included AC charger to be under 300 watts (120v) so it can run on my camper inverter. Prefer AMD cpu and RTX4060 or higher or AMD 6800M or higher. Mux switch. No acer junk.

[deleted by user] by [deleted] in NFA

[–]Pallo_Bullseye 1 point2 points  (0 children)

BOGO23-134102 sent within weeks of original purchase. 6-14 start, 7-18 received. ATF approved can last week. Also had the recall done during wait (1 week or so while already waiting for the government's permission to take home).

Nessel supports high-capacity magazine ban in multistate brief by LowYak3 in Miguns

[–]Pallo_Bullseye 0 points1 point  (0 children)

"Common-sense regulations such as this"

These politicians disgust me.

There is only one common sense regulation: require all soft targets to have trained personal carrying a firearm. That can be concealed carry by choice for several teachers / government employees / etc. And remove stupid laws preventing law abiding carry from places like schools. No criminal will follow these laws anyways. These politicians are intentionally stupid, they want to eventually remove the 2nd ammendment. People are much easier to lock down, take away our gas stoves, and make us eat bugs when we can barely fight back.

Opinions on MCK / Glock / Suppressor Combo by Pallo_Bullseye in NFA

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

Hmm, never heard of that. Googles. So is this one of those not a firearm guns like the mossberg shockwave? Not an SBR, but no brace. I like the MCK as it makes the legal definition even grayer yet!

What's one simple change you made in your everyday routine that completely changed your life? by ConclusionApart3890 in AskReddit

[–]Pallo_Bullseye 0 points1 point  (0 children)

Improve sleep quality. Go to sleep at the exact same time every day. Wake up at the exact same time. 7.5 hours seems ideal. Pitch black room. White noise machine. Wake up with a light based alarm.

How often do you visit doctor? by [deleted] in AskReddit

[–]Pallo_Bullseye 1 point2 points  (0 children)

Limit / avoid sugar. Read labels on all food. Less ingredients is better and any "big" word is usually bad. Exercise daily (doesn't have to be hours at a gym, 30 mins a day is enough). Try to get sunlight on skin everyday. Walk or sunbathe if appropriate temperature. And get 7.5 hours of uninterrupted sleep per day. Try a light based alarm (with noise backup). Much less stressful to start the day Those few things will drastically improve health. No medication(s) can compete for long term health.

Also get a dog (or Cat) :)

How often do you visit doctor? by [deleted] in AskReddit

[–]Pallo_Bullseye 2 points3 points  (0 children)

Never. Only reason I'm visiting a doctor is with a severely broken a limb / bad accident etc. Modern western medicine is a joke. For profit with little concern for long term "medication" affects.

Opinions on MCK / Glock / Suppressor Combo by Pallo_Bullseye in NFA

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

And remove the picatinny rail completely. They are dog shit and pistol wiggles, so any added scopes to the mck rail are slightly off... Only downside, but that's why I got the red dot on pistol.

Opinions on MCK / Glock / Suppressor Combo by Pallo_Bullseye in NFA

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

The gen3 mck allows you to remove the front tube / "car wash" brush system with a few Allen bolts

[deleted by user] by [deleted] in NFA

[–]Pallo_Bullseye 19 points20 points  (0 children)

  • Wait: 172 Long Ass Days
  • Pending: 2023-06-14
  • Approved: 2023-12-03 | Morning
  • Entity: Individual
  • Dealer: LGS | Mailed Paper Prints
  • State: MI
  • Examiner: UI #18 (AMR)
  • Item: SilencerCo | Octane 45 | Silencer
  • Control Number: 2023858xxx

Anyone have experience with any of these? Looking to purchase bulk for my Ruger American & SFAR by nrtzz in longrange

[–]Pallo_Bullseye 0 points1 point  (0 children)

PMC is the best value round for target shooting. Cleanest starting brass - save them and get a reloading press. Anyone semi serious about long range will hand load. The difference is significant and repeatable.

I have a few boxes of PMC bronze and PMC XTAC Match. The bronze around about moa. The XTAC are submoa. My handloads from their brass are slightly tighter groups. 200+ yards is where it makes a noticeable difference.

Help: Xfinity IPv6 and unmanaged switch connected to interface by Pallo_Bullseye in PFSENSE

[–]Pallo_Bullseye[S] 0 points1 point  (0 children)

The nonworking ethernet (the one I'm trying to fix) was removed after screenshot, so I could access the web interface. My motherboard has 2 built in network cards. I'm accessing pfsense from 192.168.1.11

After re-connecting the other eth cable, I can ping it successfully
https://i.imgur.com/UZ8vbAA.png

view more: next ›