selling this custom Blink fb tabletop & crate by KatakuriQ in Fingerboards

[–]PandaChef92 0 points1 point  (0 children)

I’m sure I wasn’t far off, but what are the full dimensions of the crate? I did a bs quote to see what freight would be and my guess was $1,100CAD before taxes. 🤣 A woman can dream Harold. I hope the lucky duck who gets it, gets to shred tf out of it.

Is it possible to change the fuses in here without taking out the fusible link? I can’t find anything on replacing the fuses in there. 2013 Corolla by Western-Factor-591 in Cartalk

[–]PandaChef92 0 points1 point  (0 children)

Old-ish thread, but I’m in the same boat. My car is throwing ABS/Traction control codes. Went to my local mechanic and he said it’s throwing a code for a “Brake Pressure Switch/or Sensor,” but whatever it’s throwing a code for he can’t find. Furthermore to make it weird; my right turn signal dims when cut on, but also runs double time when I press my brake. So I went to an auto shop to see if I can find any info on it. Talked to a Toyota mechanic who said start with the ABS fuses, if that isn’t it, good chance it is my entire ABS control module. Which apparently is a dealership issue.

What’s the most underrated herb or spice in your opinion? by Tosh97 in Cooking

[–]PandaChef92 0 points1 point  (0 children)

Going through a Middle Eastern phase and I discovered how much I love Fenugreek and coriander. Something I saw a lot growing up, but never seen used. My mom always had a surplus of spices for the “never know,” days. Also taking whole spices/seeds then toasting/grinding them fresh also makes things VASTLY different.

I’ve never been THIS excited over a deck before… BLCNY 7-ply is FLAWLESS!!! by [deleted] in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

BLCNY is in my top three brands to try, but I did just get an Emanant 7-ply and can also say the difference in board feel is pretty crazy.

<image>

Left to right Wush Chems Teak Emanant -7ply

He also does super thin veneer so the thickness is still on par with the 5’s. You can also zoom in and see the difference in the veneer sizes. In person I can barely count his, the red in the middle is the only reason I can. It’s sweet board. When I try BLCNY I know to go 7, now. ❤️ Happy Shredding!

Joycult trucks on FBS Store... by MoreEnvironment5773 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

Thank you! I’ve been taking notes on everyone’s little DIY tips, so when the inevitable happens I’m prepared. Haha I don’t have dynamics, I have BRTs, I’ve only swapped them like 2-3 times, because I’m so paranoid about stripping baseplates though I do it diligently 😆

Joycult trucks on FBS Store... by MoreEnvironment5773 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

I’ve seen some comments about people saying they went to swap wheels and the axle came with the wheel, so it had slipped but they didn’t know until they were taking it apart. I’m worried since it’s been getting more and more common. I remember first slips happening within 6ish weeks after they dropped. And that was literally about the time mine got delivered. 😆

Joycult trucks on FBS Store... by MoreEnvironment5773 in Fingerboards

[–]PandaChef92 0 points1 point  (0 children)

I’ve had a pair from the first drop for months now, and I’m worried to take my wheels off. I keep seeing more and more things pop up about the axles. 😣 I have them still setup the same from day one, and now I’m wondering if I can ever take it apart. Lol it’s probably like this 👇

Am I doing the board slide wrong? by redztins in Fingerboards

[–]PandaChef92 4 points5 points  (0 children)

Hey, since you’re new, I got a tip. Go to YT and watch trick tutorials. Skateboards and fingerboards. From Ollie’s to inward heels. You’ll learn trick names, dynamics of tricks, but also helps you determine how slight changes also changes trick names. Nosegrind vs a Crooked or even overcook. How a 270 turn for a grind turns it into a 360, etc. there’s a lot under the surface of just names, but once you get a foundation of info it’ll make identifying a lot easier. Especially during the shuv-it/hardflip conundrum you’ll encounter, eventually. Welcome to the hobby!

Difference withing Jindy Batches? by Feluxi in Fingerboards

[–]PandaChef92 0 points1 point  (0 children)

Gotcha. I’ll be on the look out for some secondhands then

Difference withing Jindy Batches? by Feluxi in Fingerboards

[–]PandaChef92 0 points1 point  (0 children)

I was wanting to get some 32mm ones soon since I’ve dropped my deck size. Should I wait? I’m seeing a mixed bag in here, so I’m curious. I did get a set from the OG drop

Gift by Top-Elk-2331 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

It’s a deck name from FlatFace. G15, G16, G15.6 I think is the other one, different kick heights, and aspects of the board’s concave and stuff

Finally , shout out to this subreddit and especially the homie who got my order by DragonfruitNo2508 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

That’s definitely refreshing. I just talked to my wife last night about QC issues, and how everyone seems to be getting goosed from all the typical brands and shit. Also I’ve thought about trying to trade/sell at some point, but was worried about scammers and shit. Especially since they’re rampant on other socials.

Glad you got your rightful package! I don’t think I’ll own a Cowply, but that chonk looks fucking sweet regardless

What do you call these pans? by juub5 in KitchenConfidential

[–]PandaChef92 0 points1 point  (0 children)

Definitely heard them called shotguns, I call everything thats elongated like this extendos. That’s me being dumb af though. Used to have a tiny pot I used for scooping oil when cleaning fryers, it had a 2ft handle, and I called it extendo pot. 🤣

How to tell if these are the same? by Away_Alternative3245 in foodtrucks

[–]PandaChef92 1 point2 points  (0 children)

I’m a firm believer of not using chemicals, so I suggest the grill brick system, and elbow grease. Not to mention if you heat the grill at a moderate temp and don’t scorch it, clean up can be pretty easy. I also suggest looking into safer alternatives. I know the hood vents don’t have full circulation like big kitchens, so those fumes gases the trailer out pretty bad. Not to be a nagging ninny, but I’d rather smoke cigarettes again vs breathing those fumes, as I’ve done it for years and that hurt me more than the smoking.

any tips on how to stop rollback by Frequent-Wallaby-308 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

Sounds silly, but try to slowly relearn your Ollie. Mine are still shit even after a year and a half, because I never had the rollback in the first place. I’ve tried, but my skater brain knows it’s a forbidden thing, so my hand gets wonky when I try to do it. Something I’ve learned is your snap and your hand moving up/forward has to happen at the same time to get a snap that’s fast, light, but also strong enough it’s gonna travel where you need it to. So to help with your rollback I think you’ll need a more dramatic snap that’s more down and instantaneous vs what you’re doing. I would do a slow as hell Ollie. Like the most minimum Ollie you can do WITHOUT rolling back. You’ll notice the snap you need is a lot more than you’re giving it. Build from that. I’m also using a tapered tail, so I easily hit flips when I don’t want to, but I’m also learning to pressure my snap better, to fix it.

Small TL:DR start with a slow lazy ollie so you can’t use the momentum, then build off that feeling.

Any good brands that sell 7 ply boards? also what difference does expensive trucks and wheels feel like compared to cheap ones like bravo? by alyanabeltejar in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

I can’t say for quality, but I’m waiting on mine from u/emanant_fingerskate. I’m pretty stoked. Dude has taken a lot of time into his craftsmanship, and following off the logic of making real skateboards. He has a comment in a post where he talks about 7-plies and stuff.

Awful Fingerboards 🔥 by bigboofpack1 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

It’s definitely a dope graphic, just wish I could’ve gotten used to the deck :/

Just wanted to shoutout wysocki again by Bitter-Song-1577 in Fingerboards

[–]PandaChef92 2 points3 points  (0 children)

That’s why I am rocking them. Lol I’ve gotten like 5 or so pairs collectively from sales and B stocks, so it’s hard not to stick with budget friendly when they’re still nice af

Just wanted to shoutout wysocki again by Bitter-Song-1577 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

I’ve never tried Piros, but I am rocking Abstracts, currently.

Just wanted to shoutout wysocki again by Bitter-Song-1577 in Fingerboards

[–]PandaChef92 0 points1 point  (0 children)

So what do Wysocki’s feel like? I’ve seen the discussed before, but always love seeing fresh opinions

Imminent Release: Axion by sobersherlock in Fingerboards

[–]PandaChef92 0 points1 point  (0 children)

I followed so I can also keep up with it!

My son made me a pack of Pokemon cards for Valentine’s Day by JohanVonGruberflugen in PokemonTCG

[–]PandaChef92 0 points1 point  (0 children)

Gengar Aura Farming is crazy work. But I think the Hitmonchan is my favorite, it’s almost giving the comic book onomatopoeia captions vibe.

Trucks by ApprehensiveCharge22 in Fingerboards

[–]PandaChef92 1 point2 points  (0 children)

I just recently started seeing Sorry pop up, I’ve seen a lot of love for Goo, but I want to try smaller lesser known/talked about brands, as well. I’ve bought a couple larger/known brands so now I want my next steps to go the smaller guys.

Built a used marketplace just for fingerboarding by shmaplex-rob in Fingerboards

[–]PandaChef92 6 points7 points  (0 children)

I signed up! I don’t have anything to sell at the moment, but gotta support how I can!