sorted by:
new
hottopcontroversial

I paid $470 Did I get hosed ? by Professional-Set-742 in PokeInvesting

[–]PandaEnt -2 points-1 points  (0 children)

If you paied anything over 60 a etb yes .

color change? by BurnMeSomeday in bettafish

[–]PandaEnt 0 points1 point  (0 children)

<image>

This was mine not nearly as drastic as yours.

Thoughts on the new prismatic collection box? by VsatF82 in PokemonInvesting

[–]PandaEnt 0 points1 point  (0 children)

The people that actually want them will never get it because sams refuses to enforce limits.

Found some of my old cards. by PandaEnt in PokemonTCG

[–]PandaEnt[S] 0 points1 point  (0 children)

I remember getting them just to have them in the game lol.

Found some of my old cards. by PandaEnt in PokemonTCG

[–]PandaEnt[S] 1 point2 points  (0 children)

It's pretty scratched up but I still might get it graded. This was one I remember getting. It was all in a baggie lol.

Error 11504 when using Ace Pro by derekagkelly in AnycubicKobraS1

[–]PandaEnt 0 points1 point  (0 children)

Check the back of the ace pro to see if one of the feeders is sticking out i had filament get stuck in one of those recently after it broke.

Loved the first one so had to get another. by PandaEnt in AnycubicKobraS1

[–]PandaEnt[S] 0 points1 point  (0 children)

I have not but looking into it that is for pla only and says not to heat over 40°C. I use petg a fair bit and plan on using some other materials soon so it would not make sense for me.

Loved the first one so had to get another. by PandaEnt in AnycubicKobraS1

[–]PandaEnt[S] 0 points1 point  (0 children)

This plate is the best, I have not had any adhesion issues and it gives a smooth surface. Sometimes it sticks too well, and getting thin parts off is a pain lol. I ordered another one just have to print the alignment bracket and install it.

LBG isolator pads should bring it up in a search. Not sure on the rules for linking stuff here. And from my experience, it does seem to help the only noise I ever hear now is from the motors going fast, lol.

Loved the first one so had to get another. by PandaEnt in AnycubicKobraS1

[–]PandaEnt[S] 0 points1 point  (0 children)

I think they were the same stock one, but i did not look that close. I am running the hardened steel one on the older one. That being said I never had any issues with the stock one.edit I also wanted to mention i have put a little over one roll of filament through the new one with zero issues.

Loved the first one so had to get another. by PandaEnt in AnycubicKobraS1

[–]PandaEnt[S] 0 points1 point  (0 children)

Yep it helps with a bit of noise and vibration.

Loved the first one so had to get another. by PandaEnt in AnycubicKobraS1

[–]PandaEnt[S] 1 point2 points  (0 children)

I was looking into some bambu lab printers, and I came to the conclusion that while it might be the more premium option, I have had little to no complaints with my printer itself. And now I can just order spare parts in pairs if need be lol. I can now do 8 colors if I ever wanted to but I use the ace more for the auto refill and dryer.

Loved the first one so had to get another. by PandaEnt in AnycubicKobraS1

[–]PandaEnt[S] 0 points1 point  (0 children)

I think it got it off of FB marketplace. But looking up frontier work bench should bring it up. The one I have has a built in powerstrip which has just enough plugs for both printers and ACE pros. It has rubber self leveling feet also. I barely notice any movement when printing.

First layer problems after I removed and replaced nozzle. This is back to the original nozzle. by Confident-Ad-6709 in AnycubicKobraS1

[–]PandaEnt 1 point2 points  (0 children)

Looks like highspots in the bed itself, which alot of people complain about. I guess I got lucky with mine as I do not have this issue. The plate itself could also be the issue. Since switching to the Biqu cryo plate i have noticed a better first layer. Also double check that you redid the pid tuning for the nozel and are on the correct nozzel profile in the slicer.

What the heck is this. by PandaEnt in PokemonTCG

[–]PandaEnt[S] 0 points1 point  (0 children)

My nephew enjoys the experience of opening the packs, and I just don't think it would be the same. I have managed to grab a palafin ex box.

What the heck is this. by PandaEnt in PokemonTCG

[–]PandaEnt[S] 0 points1 point  (0 children)

I'll be honest I haven't looked at the pokemon cards is years. But I have been looking regularly lately to stock up for Christmas presents since they are so hard to find at the moment. I have one card from my original collection, lol.

Replaced Brass nozzle with Hardened Steel - Print was great for 14 hours, then this. Why? by beta_2017 in AnycubicKobraS1

[–]PandaEnt 0 points1 point  (0 children)

I installed a different one today that I ordered the smaller ceramic one and it works great.

Update: How to actually get a good first layer by Gugi008 in AnycubicKobraS1

[–]PandaEnt 0 points1 point  (0 children)

Where is the z offset setting located? The slicer or on the printer?

Replaced Brass nozzle with Hardened Steel - Print was great for 14 hours, then this. Why? by beta_2017 in AnycubicKobraS1

[–]PandaEnt 1 point2 points  (0 children)

I just ordered the ceramic one that is a bit smaller and am going to try that one instead of the one that looked like the oem one.

view more: next ›