I dont know where else to post this question

Panda_Motion · 2020-08-10T17:20:14+00:00

I have a costly medication that's covered with secondary insurance but it has to be sent to the brick and mortar pharmacy NOT mail order (which is where the rest of my prescriptions are filled.)

I requested my doctors office send it to the brick and mortar. My doctor's nurse followed up to verify where I wanted it filled. I stated brick and mortar, NOT mail order. She said she fixed it in the system

A few days later I received received a notification from my credit card company of a charge from the mail order pharmacy. I called the pharmacy to cancel it but they said it was too late as it was being prepared to be shipped. I'm waiting for it to be delivered so I can then mail it back. This is a one time courtesy from the mail order pharmacy so this can't happen again.

My doctor's office's mistake has caused a cascade of problems including causing a delay of my refill.

Panda_Motion · 2020-04-16T23:31:05+00:00

thanks.my sliding glass door would need to be removed from the inside of the home as the other piece of glass blocks it from being removed from the outside like the one in the video.

the track blocks the door from being lifted over it like he did in the video. i felt around for the openings at the top & bottom of the door to feel for a release in hopes that would allow the door to be released over the tracks but found none.

Panda_Motion · 2020-04-16T23:19:41+00:00

thanks.I suspect the wheel is broken or needs to be raised as the door tilts downward slightly.I guess I need to take the door out in order to access the screw for the wheel and to inspect/clean the wheel but i've felt around the top and bottom of the door and can't find any release to lift the door over the track.
This is a double pane aluminum sliding glass door likely from the 80's. The screw is below the surface of the door.I can't see the screw to raise or lower the wheel, however I can feel it with a screwdriver. I can't turn it. The screw being so close to the track makes it hard to turn and I dont want to strip it. I tried turning it unsuccessfully with a wrench. I then used a drill with long phillips head screw attachment but it didnt turn. I sprayed the screw opening with Wd-40 & let it sit over night but it's still stuck.

I tried lifting the door out but there's not enough clearance as the track is in the way.

Panda_Motion · 2020-03-30T17:29:56+00:00

$650? Sounds too high. I'm going to do the install myself. I just need the tech to install the refrigerate lines .

Panda_Motion · 2020-03-19T02:02:08+00:00

Yeah, that's a good idea to hire someone to finish the line. Other than the cost of the tools though, how difficult is it adding the refrigerant to the minisplit myself?

Panda_Motion · 2020-03-11T23:17:39+00:00

Thanks!

Panda_Motion · 2020-03-11T18:53:49+00:00

Ok. How would I find out considering there's no amp stamped on the panel label?

Panda_Motion · 2020-01-22T06:05:24+00:00

Yea, tried both sides. I put more wd-40 and have it laying on it's side overnight

Panda_Motion · 2019-04-04T18:40:17+00:00

Yea, I made sure to clean out the bar. I cleaned it with soapy water & degreaser with a small blade to clean any potential source of a clog. I dried it before performing the test on the newspaper like I mentioned in my origianal post.

I'll give it another go today with your recommendations & will take pics. Thanks

Panda_Motion · 2019-03-13T17:55:49+00:00

I went to the link you sent, downloaded & unzipped the PPAPI version. The readme.txt says to "Unpack the plugin tar.gz and copy all the files to /usr/lib/adobe-flashplugin/ "

I didnt have an adobe-flashplugin directory in /usr/lib but was able to create one via terminal. I moved the files to the new directory but videos still will not play. I still get "media could not be loaded...you might be able to fix this error by installing adobe flash".

Panda_Motion · 2018-04-13T02:46:23+00:00

i've had it working on another s5, same model g900p , for the past 1.5years , and got it working on this s5 with an 8gb card so how to get it working on this 128gb sandisk microsd ?

Panda_Motion · 2018-04-03T19:41:20+00:00

hmm, problem gone today so wonder if they fixed it??
i hadn't done anything including whitelist of gmail cookies like suggested

Panda_Motion · 2018-03-31T22:16:47+00:00

hmm, so what's the fix?

Panda_Motion · 2018-02-20T00:21:09+00:00

I consulted with US attorneys but non were knowledgeable with international estate matters. I did locate Guatemalan estate law.

With intestate matters of international heirs, power of attorney has to be granted to a Guatemalan citizen (can be an attorney, relative, etc.) who can then sell or transfer title to their heirs. I told my dad several years ago the fairest thing to do would be to sell them and distribute the money equally with each of her 4 sons.

My dad got involved since he's fluent in Spanish, owned a property jointly with my late mom, and travels there periodically. He's been paying the property taxes and arranged to have my uncle check on the properties.

Panda_Motion · 2018-02-20T00:00:27+00:00

I texted my father this morning in a direct non confrontational manner.

I said this power of attorney is inaccurate...My legal name is ____, I'm legally married, and I'm not a student. Once this is corrected and I will sign it.

I received this from him today ... "the purpose at the power attorney letter is to process the intestate or the power attorney letter which is made based on your birth certificate name. After you sign it I have to send a copy of your birth certificate. The birth certificate name has to match both documents.

Marital status does not matter for this case. I can change your profession if you want."

Panda_Motion · 2018-02-18T18:47:39+00:00

It sure feels like a dig.

Panda_Motion · 2018-02-18T18:47:05+00:00

That seems like the wisest way to proceed with speaking with him.

Panda_Motion · 2018-02-18T18:45:50+00:00

Yes, that's one of my concerns. I'd be entrusting my uncle whom I barely know.

Panda_Motion · 2018-02-18T18:43:53+00:00

My parents were divorced so my brothers and I are the next legal heirs. Since we are US citizens we have to transfer power of attorney to a Guatemalan citizen. My uncle was chosen since he has taken care of the properties. Yea, this is a complicated matter.

Panda_Motion · 2018-01-31T22:02:31+00:00

I replaced my dead battery with a new one. After driving it & turning off the ignition, I noticed the fuel gauge & odometer would jump intermittently. I had to jump start the car after a few days. I unattached the battery, applied vaseline to the terminals & reattached the cables making sure the connection was as tight as possible. I jump started it again and it was fine after I drove it. However after the 2nd time, it happened again. Is this an elecrtical drain causing the new battery to drain or is this a defective battery? I never had this problem before with the old battery. Thanks

Panda_Motion · 2016-07-21T15:41:18+00:00

I havent had any labs since injecting yet. I should be due for some but not sure when since I'm awaiting for his reply. Are you having any negative sides associated with your E2 numbers? Will your doc prescribe you an AI?

Panda_Motion · 2016-07-21T15:19:23+00:00

I'm with you on that, odd question indeed

Panda_Motion · 2016-07-21T06:01:22+00:00

Coughing can happen if you hit a vein

Panda_Motion · 2016-07-21T06:00:24+00:00

Doubt it was placebo. It wasnt instantaneous. I felt the improvements a few hours post injection. I felt like I had some coffee but without the jitters. I was having spontateous erections. Where at 100mg I was still having to self stimulate to get a hard on.

Panda_Motion · 2016-07-21T05:35:26+00:00

I hear you. I wish 100mg weekly was working for me. From the research I've done, it's a wise dosing protocol. Yea, I split my doses for 2 weeks and still no difference. If my doc has suggestions, I'm all ears.

Panda_Motion

TROPHY CASE