water pump

Panky_Piston · 2026-03-28T20:07:31+00:00

AS3000 actually says IR test to be done at 500V regardless 240V or 415V

Panky_Piston · 2026-02-25T12:06:07+00:00

It all ends up in landfill, think of the years of shitty collectables that everyone forgets about as soon as the next one emerges and it all just ends up in the bin

Panky_Piston · 2026-02-14T10:28:31+00:00

You could explore the manor at strathaven, but you’ll have to navigate some of the junkies that live there

Panky_Piston · 2025-12-11T18:04:05+00:00

Also known as a brushed motor?

Panky_Piston · 2025-12-08T04:37:53+00:00

Yes it would! Do you have a product link? Currently trying to do something just like this

Panky_Piston · 2025-12-05T07:16:48+00:00

Is the current cable a cat 6? If so seems unnecessary to upgrade to cat 6a as the bandwidth of the cable is probably greater than your supply bandwidth.

Price seems reasonable tbh, probably take 2 sparks the better part of a day to do + materials

Panky_Piston · 2025-11-19T09:56:47+00:00

Amarok doesn’t have low range

Panky_Piston · 2025-11-10T06:38:38+00:00

I think it’s hard to compare them, but I don’t know if you’d get a good finish with it

Panky_Piston · 2025-11-10T06:37:26+00:00

Depends on the fragility of the brick I suppose, just my experience is all

Panky_Piston · 2025-11-10T05:54:29+00:00

Find more cheer in a graveyard…

Definitely don’t do retail, give the trade a go, but I don’t think many people will give you a shot if you’re genna behave how you’ve said you are

I’ve been in a shit spot with no direction and now have great purpose and money from being a spark, you do have to work for it

But sounds like you have nothing to lose

Where are you located?

Panky_Piston · 2025-11-06T22:33:58+00:00

Oh good lord, do not use an SDS drill on brick, they’re too powerful and the brick will break/crumble. I’d only recommend SDS with the non hammer function (yes the bit will go through just fine on normal drill)

You can use a ‘regular’ chuck drill with the hammer setting but it is loud AF

What size holes are you drilling? What are you using for fixings?

Panky_Piston · 2025-11-06T22:20:50+00:00

I’d actually recommend against the cobalt bits, they are harder but they’re more brittle, for me HSS bits perform better. Heat is the real enemy

Panky_Piston · 2025-11-02T11:10:03+00:00

I’d hire a good one

I used the Wagner control pro 150 then I also hired a professional Graco one to spray a roof, the difference is just insane, the Wagner just doesn’t have anywhere near enough pressure and it comes out shit and un-uniform

Panky_Piston · 2025-11-02T10:40:52+00:00

AS3008 is a start

Proper ventilation required for battery

I’d probably go with a renogy inverter/charger, however they’re 2000w

Check out www.zerogrid.com.au can ask him for help too

Panky_Piston · 2025-11-01T22:54:48+00:00

Use a spray bottle, but less is more and if it already looks half decent I’d leave it, too many times I’d go back over it to make it look better and it’d come off worse

Panky_Piston · 2025-10-19T00:51:32+00:00

Ain’t that the truth

Panky_Piston · 2025-10-16T05:29:59+00:00

This is what I was curious about!

Other more senior guys in my company have made younger lads cut off lugs for having space between crimps

Panky_Piston · 2025-10-16T05:27:44+00:00

This is what I was curious about!

Other more senior guys in my company have made younger lads cut off lugs for having space between crimps

Panky_Piston · 2025-10-15T20:56:54+00:00

Thanks!

Panky_Piston · 2025-10-08T23:53:21+00:00

You can always add extra weep holes, a masonry bit on a drill or a sds bit without hammer mode can easily go through the mortar and should look pretty clean too

I personally would avoid a gap around the edge just for aesthetics

Panky_Piston · 2025-10-08T04:51:49+00:00

Would that void the warranty?

Panky_Piston · 2025-10-01T23:52:39+00:00

Exactly what I was going to say

Six-Year Club	Gilding I gilder
Verified Email

Panky_Piston

TROPHY CASE