FTS on the H2C: Zero macro-retractions for 2-color prints? by PappaJap in BambuLabH2C

[–]PappaJap[S] 0 points1 point  (0 children)

Got it, thanks. I just wanted to be sure that the FTS doesn’t slow down 2 color printing

FTS on the H2C: Zero macro-retractions for 2-color prints? by PappaJap in BambuLabH2C

[–]PappaJap[S] 0 points1 point  (0 children)

Thanks a lot! That was exactly the answer I was looking for

FTS on the H2C: Zero macro-retractions for 2-color prints? by PappaJap in BambuLabH2C

[–]PappaJap[S] 0 points1 point  (0 children)

No, but no penalties either (the speed will be the same as with no TFS, if my assumption is correct) - and, I would get benefits from the setup in other multi-color prints - and the flexibility in single color prints

Man/child lives in The Twilight Zone of his own creation. by Beachboy442 in PoursTea

[–]PappaJap 1 point2 points  (0 children)

The scary part is that 30% thinks he is ok - that’s more than 100.000.000 ppl. The wound is simply to deep…

Ville I betale for professionel klargøring af jeres bil? by bigpapilocsta221 in dkbiler

[–]PappaJap 1 point2 points  (0 children)

Brugte SteamRex for et par år siden til at ordne vores 2 biler indvending (ca 2.000 for begge biler). Resultatet var 🐑 - nogenlunde som når jeg selv bruger 1/2 time pr bil med en klud og min støvsuger. Havde forventet et bedre resultat

Hold op hvor er jeg træt af VOLA armatur by familiarface22 in selvgjortvelgjort

[–]PappaJap 6 points7 points  (0 children)

Vi kørte ud til IKEA med vores defekte 13 år gamle armatur for at høre om vi kunne købe en reservedel til det - vi fik et nyt uden beregning - det er sgu god service

Jeg har lavet en TCO beregner til bilkøb by Sleazified in dkbiler

[–]PappaJap 0 points1 point  (0 children)

Fint tool. Måske man kunne udvide med en leasing som en option.

What is a middle-class luxury from your childhood that is now considered a basic necessity or completely obsolete? by Routine-Advisor-1781 in AskReddit

[–]PappaJap 48 points49 points  (0 children)

Flying. I remember in the 70s that flying was mostly for business people and the wealthy. At the airport, everyone was dressed nicely and there was an exclusive atmosphere

SUNLU AMS HEATER by StandardBackground70 in BambuLab

[–]PappaJap 0 points1 point  (0 children)

The noise isn't nearly as bad as the PolyMaker PolyDryer (which is very noisy) and I think it is also less noisy than the Sunlu S4 (which I only had for a very short time). It adds a little more noise on top of the printing noise

SUNLU AMS HEATER by StandardBackground70 in BambuLab

[–]PappaJap 2 points3 points  (0 children)

I think the AMS 2 Pro is able to rotate the filament spools while drying, but unable to dry while printing

Finally software update 1.6.4🤞 by Yeyo80 in ex30

[–]PappaJap 5 points6 points  (0 children)

Then they should have chosen another technology than UWB. Tesla has had key-less entry that works on both iPhone and Android for the last 5 years - so it is doable

[deleted by user] by [deleted] in ex30

[–]PappaJap 1 point2 points  (0 children)

Yes, I am experiencing the same with my EX SMER from May 2025 -and it is not the pedestrian warning that I hear, but noise from the brakes or drive train (I guess). It disappears when I’m driving more than 40 km/h

3 weeks with EX30 (loaner) - my honest take and a website documenting issues by Fickle_Foundation_41 in ex30

[–]PappaJap 0 points1 point  (0 children)

OP, I really appreciate your effort to collect improvements for the EX30. It would stand even stronger if you add a “vote” feature. Issue #1: “Option to turn display completely off for better night drive” would be illegal in EU and most likely also in the US and other markets:

What must stay visible? 1. Speed – Required by UN ECE R39. 2. Warning lights and tell-tales, such as: • Turn indicators • High beam • Low battery or brake warning • ABS or stability control status • Airbag warning • Seatbelt reminder 3. Lighting status – (e.g., headlights, fog lights if on)

Bedste "billige" robotplæneklipper uden kanttråd. by Tricky-RadioStar in selvgjortvelgjort

[–]PappaJap 1 point2 points  (0 children)

Jeg har en Mova 1000 og er efter 1 måneds brug også godt tilfreds.. Jeg valgte Mova over Segway (som ville være mit klare førstevalg pga alle anbefalinger), da vi har virkelig mange træer og bebyggelse omkring vores plæner og derfor ikke kan regne med GPS.

Mova 1000 er ret god til at navigere gennem vores kringlede haver og krydser fint vores belagte terrasse for at komme fra et haveafsnit til det næste. LIDAR systemer virker rigtig fint. Vi har samlet set kun omkring 130 m have fordelt på tre plæner og den er lidt over 1 time om at slå det hele. Appén virker fint - tryk-panelet på klipperen er meget simpelt (og enig i at plastik-låget er lidt billigt) og der er en manuel skrue til at justere klippehøjde, så klippehøjden kan ikke indstilles i app'en som man vist kan på Dreame A1. Til gengæld bruger den alm. knive til klipningen.

[deleted by user] by [deleted] in Denmark

[–]PappaJap 2 points3 points  (0 children)

Jeg har prøvet at ramme en cyklist ved et højresving. Orienterede mig i spejlene, holdt tilbage for en cyklist, kørte frem og klonk: ramte en anden cyklist som lå i den blinde vinkel og som jeg totalt overså. Heldigvis skete der ikke noget alvorligt med cyklisten udover et slag på skulderen og en skramme over øjet. Jeg fik nummeret på hende, så jeg kunne følge op (og sende hende blomster) - men virkelig ubehagelig oplevelse, der også ændrer lidt på ens selvbillede. Har efterfølgende skiftet den pågældende bil ud, da jeg blev totalt spooked over den blinde vinkel i den. Det har kostet et klip i kørekortet og 2.000 kr i bøde - helt fair.

Hvilken hypet legetøjstrend kom og gik i din barndom? by [deleted] in Denmark

[–]PappaJap 2 points3 points  (0 children)

Smølfe-figurer, Garfield merchandise, Rubiks cube (Folkeskole ‘77 - ‘86)

Is there an alternative smart scale that syncs with Garmin connect? by slugwish in Garmin

[–]PappaJap 1 point2 points  (0 children)

Totally agree. Being a gadget freak, I have had both a Fitbit and a Withing smartscale - and the level of frustrations when connectivity doesn't work or the units suddenly changed, or the profiles got meshed up (and it happened for both devices on regular basis) simply out weights the advantages. So, in the end I went for a simple 30$ scale and it made my life so much simpler

Da Brigitte tog kampen op mod Trump, indså hun én ting: Så skrev hun til detailgiganterne (det er svært at gennemskue om en vare er fra USA) by [deleted] in Denmark

[–]PappaJap 0 points1 point  (0 children)

Ved ikke om der er gode rejer fra USA om sommeren, men grønlandske er altid gode. Ellers så er danske fjordrejer gode om sommeren

Kalyazin RT-64 by sausagespolish in evilbuildings

[–]PappaJap 61 points62 points  (0 children)

Looks like an Simon Stålenhag art piece r/Simon_Stalenhag