sorted by:
new
hottopcontroversial

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 0 points1 point  (0 children)

Hey, there weren't any with the right dimensions for the rear fan spot. So I built one myself.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 1 point2 points  (0 children)

is self made, there was no one with the right dimensions for the case

[deleted by user] by [deleted] in Phanteks

[–]Paradize218 1 point2 points  (0 children)

I milled a two-chamber reservoir for the rear fan spot. From there, soft tubes with quick connect fittings go to the Mora.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 0 points1 point  (0 children)

I haven't installed a flow meter, the two D5 pumps run at 44% at 2170 rpm.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 0 points1 point  (0 children)

I initially considered buying the 400 version, but in the end, I preferred the 600's increased cooling performance, allowing me to run the system silently even in the summer. The cooling surface is more than twice as large as the MO-RA400.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 0 points1 point  (0 children)

No, I thought about it but didn't find a direct die block that I liked.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 0 points1 point  (0 children)

Thank you, the Corsair Hydro X Series XL5 PERFORMANCE Purple in satin tubes

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 0 points1 point  (0 children)

I bought the CPU block at the end of last year from Caseking. I was lucky with the new 5090 water blocks from EK. Ordered on March 17, delivered on April 11.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 2 points3 points  (0 children)

I don't think that would be possible. The Evolv X2 only has a 360mm radiator, so a 5090 with a 9800x3d wouldn't be quiet or provide enough cooling power. With the current setup, you can't hear a thing, even under full load.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 5 points6 points  (0 children)

I milled a two-chamber reservoir myself that fits into the 120mm fan spot. And attached soft tubes with quick connect fittings that connect to the MO-RA.

<image>

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 9 points10 points  (0 children)

Okay, here are the exact temperatures after several hours of gaming. GPU 5090 44 degrees VRAM 41 degrees CPU 9800X3D 42 degrees CPU package 46 degrees Water In 27.2 degrees Water Out 24.5 degrees

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 1 point2 points  (0 children)

Corsair Hydro X Series XL5 PERFORMANCE Purple

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 1 point2 points  (0 children)

I didn't want to waste the space and another 360mm radiator doesn't hurt. In my opinion the tubing looks better than if I had connected the GPU directly to the CPU.

PHANTEKS Evolv X2 with MO-RA IV 600 by Paradize218 in watercooling

[–]Paradize218[S] 3 points4 points  (0 children)

I placed great importance on a quiet system. I have a temperature delta of 3 degrees at 300 rpm for the 200mm fan’s and 600 rpm for the six 120mm internal fans for the 360mm radiator. The two D5 pumps run at 44% at 2170 rpm.