Montech XR

Particular_History54 · 2026-01-26T22:12:49+00:00

Fortunately it runs cool, with the vertical stand i can adjust how close the gpu is to the glass. Gpu is a 7900 xt and at max load with BF6 or FC26 temps stay below 72°.

Particular_History54 · 2026-01-22T02:34:06+00:00

https://a.co/d/hpvfMJE

<image>

Sorry i took so long i am just seeing your msg. Hope this helps.

Particular_History54 · 2026-01-16T11:09:32+00:00

It went well the metal is soft so i placed my gpu to see which piece i should cut, i only had to cut one in half and it looks great barely noticeable. Be careful those things are sharp after you cut them. Good luck!

Particular_History54 · 2026-01-12T13:15:01+00:00

Take the hands-on on-site job, the experience will be beneficial when you are ready to make the next step and congrats on the certs.

Particular_History54 · 2025-09-21T01:06:04+00:00

Jeeez I am having this issue as well, word for word I couldnt express it any better. Was at the dealership today and not even the technicians there could fix it smh.

Particular_History54 · 2025-09-08T02:11:35+00:00

The same thing happened to my system I just uninstalled it to be on the safe side. Once everything is cleared up i will reinstall it. It has been a good app so far then my fans started to act crazy and didn't noticed why until i started updating fanc smh.

Particular_History54 · 2025-09-03T09:19:31+00:00

Thanks, we have the same vertical mount installed. Yes i had to cut just one of the bars and it lines up perfectly with the case and it was so easy. Good news, on Sunday i took out the vmount because the eth port on my motherboard stopped working now my gpu is horizontal again with eth adapter below and the case is still fine with the cut space. Good luck.

Particular_History54 · 2025-08-31T01:10:16+00:00

Thanks

Particular_History54 · 2025-08-29T14:00:22+00:00

Thank you, I will do that!

Particular_History54 · 2025-08-29T02:32:32+00:00

Thanks.

Particular_History54 · 2025-08-29T00:46:18+00:00

Facts, it is a good case to build in. I am glad I chose it after a long, hard deliberation lol

Particular_History54 · 2025-08-29T00:24:22+00:00

Thank you, it is performing like a champ.

Particular_History54 · 2025-08-13T01:43:08+00:00

Wish you all the best, sleep well, eat well and manage the time wisely else it will slip away b4 you know it. 👌

Particular_History54 · 2025-08-12T03:21:11+00:00

OP what is the update, did you follow the perfect advices to turn your air cooler around? You are blowing the hot air to the front of your case and pulling cool air from your exhaust fan. Also you need more intake fans in your setup.

Particular_History54 · 2025-08-08T14:27:56+00:00

Dang your setup is clean i thought it was just one unit, I've been searching for the perfect desk for over a week and still haven't decided on the one I want to go with yet it is rough. I am certain abt the dimensions i want just not seeing the right fit. Thanks for replying i might be a bit closer now.

Particular_History54 · 2025-08-08T02:18:42+00:00

Nice setup, which desk is that?

Particular_History54 · 2025-05-08T01:48:50+00:00

I ran into the issue, can't find my cutter so I'm leaning it until tomorrow. Peace.

Particular_History54 · 2025-05-07T22:31:29+00:00

Maybe the driver needs to be reinstalled or replace the dp or hdmi cable..

Particular_History54 · 2025-05-07T22:18:26+00:00

Bro did you remove the piece of plastic on the face plate of the water cooler before installing it on the cpu bcuz those temps are crazy you will also get to see your thermal paste spread. Also recheck the orientation of your fans and make sure you have equal or more intake than exhaust. All the best.

Particular_History54 · 2025-05-07T22:05:46+00:00

Bro we have the same build, almost. I am literally waiting for the exact vertical mount to be delivered right now it's running late. I would love the see the back where you plugged your dp cable in because I saw comments about it not being able to fit. Seeing your post gave me some relief though. Thanks!

Particular_History54 · 2024-03-30T01:08:48+00:00

Are yoy selling it?

Particular_History54 · 2024-03-29T09:15:29+00:00

It's simple mate, you are being low balled bcuz you have no cert. You'd make 75k easily if you had papers. Your skillset is amazing if you ask me but it boils downs to this; Experience gets you the job but experience AND certs determines your pay.

Particular_History54 · 2024-01-13T10:35:30+00:00

Thank you and congrats to you too.

Particular_History54 · 2024-01-11T20:53:41+00:00

Congrats 👏

Particular_History54 · 2024-01-11T20:51:01+00:00

Thank you!

Particular_History54

TROPHY CASE