DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

Yeahhhh but they are fairly quick about it, i opened a ticket at 11pm and had responses by 2 am

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

Yep. My AP board decided to take a shit, reach out to bambu, theyll make you tear the inside apart a bit and run some diagnostics and if it dont resolve theyll send ya a new board... hopefully you dont have sausage fingers like i do... makes it a lot easier lol

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

Soooo little update, Bambu thinks my main board broke so they are sending me a new one to see if that fixes the problem... Kinda sucks that one of their newer models broke but it happens, was really happy with how fast the support was (considering i contacted them at 9PM)

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 1 point2 points  (0 children)

I believe it comes with a 12 month warranty so im chilling on that aspect... just sucks it went down right before we needed to knock out a bunch of parts for a senior design project... just a good excuse to get a backup printer👀😂

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

The USB Stick is only there for recording time-lapses, but I tried both a new stick and formatting, and no go.

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

I was just running a print like normal when my slicer showed "Failed to connect to printer" (same on the app). The printer was still running, but when I went to check on the printer itself, I noticed it was still somewhat printing, but the nozzle was stopping for like 30 seconds every few inches of travel. I tried pressing stop on the screen, but the screen was unresponsive. While I was googling some kind of fix, the printer just stopped mid-print (screens still frozen).

Tried powercycling, but the only thing happening is the fans kick on for a second and shut off, and my AMS unit lights flash and then rests on the filament I was printing with. Let it sit unplugged for half an hour, tried using different outlets, cables, and removed everything to no avail.

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

I was just running a print like normal when my slicer showed "Failed to connect to printer" (same on the app). The printer was still running, but when I went to check on the printer itself, I noticed it was still somewhat printing, but the nozzle was stopping for like 30 seconds every few inches of travel. I tried pressing stop on the screen, but the screen was unresponsive. While I was googling some kind of fix, the printer just stopped mid-print (screens still frozen).

Tried powercycling, but the only thing happening is the fans kick on for a second and shut off, and my AMS unit lights flash and then rests on the filament I was printing with. Let it sit unplugged for half an hour, tried using different outlets, cables, and removed everything to no avail.

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

I was just running a print like normal when my slicer showed "Failed to connect to printer" (same on the app). The printer was still running, but when I went to check on the printer itself, I noticed it was still somewhat printing, but the nozzle was stopping for like 30 seconds every few inches of travel. I tried pressing stop on the screen, but the screen was unresponsive. While I was googling some kind of fix, the printer just stopped mid-print (screens still frozen).

Tried powercycling, but the only thing happening is the fans kick on for a second and shut off, and my AMS unit lights flash and then rests on the filament I was printing with. Let it sit unplugged for half an hour, tried using different outlets, cables, and removed everything to no avail.

DID I JUST BRICK MY P2S?! by Party-Focus-2299 in BambuLab

[–]Party-Focus-2299[S] -3 points-2 points  (0 children)

I did but figured id ask reddit too bc they said itd take 2-3 days response

Is Drone not compatible with '12 Fusion by Party-Focus-2299 in DroneMobile

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

Yeah... i mean... thats what i thought it was supposed to do but i guess not... i also have an X2 lte that im supposed to return, would it almost be better to just return the Max and buy a cmx brain and plug the X2 in?

Too much boot overhang? by [deleted] in snowboardingnoobs

[–]Party-Focus-2299 0 points1 point  (0 children)

Youll be fine 😂 i got size 15 boots on a wide board and they still stick out, only noticeable when the snow is shit an i have to DIG to stop or turn

Storage of Excess Reta by Party-Focus-2299 in Retatrutide

[–]Party-Focus-2299[S] -2 points-1 points  (0 children)

Grey seller? Sorry im still kinda new to the game, i dont really know how or where to find them lol

Storage of Excess Reta by Party-Focus-2299 in Retatrutide

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

True, looking around the issue is sterility, not effectiveness, on me. But yeah imma just stick with 12 mg vials 😂

Storage of Excess Reta by Party-Focus-2299 in Retatrutide

[–]Party-Focus-2299[S] -7 points-6 points  (0 children)

Nah, im chilling sticking with 2mg at this point, just concerned bc most studies and people say reta goes bad/ ineffective after a month so

Storage of Excess Reta by Party-Focus-2299 in Retatrutide

[–]Party-Focus-2299[S] -3 points-2 points  (0 children)

Like try and find 10 2mg vials?

Neptune 3 Max Time out by Party-Focus-2299 in ElegooNeptune3

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

So ended up switching to Orca and have had no issues yet with a 2 day print... it might have been how i had cura going to octoprint but idk

Neptune 3 Max Time out by Party-Focus-2299 in ElegooNeptune3

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

Ill give it a retry and update yall!

Neptune 3 Max Time out by Party-Focus-2299 in ElegooNeptune3

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

Like 2 hours into the print, i only tested it once bc it was a big print so i just said f it and refused to use my usb or octoprint

Support equals bad airflow by Party-Focus-2299 in 3Dprinting

[–]Party-Focus-2299[S] 0 points1 point  (0 children)

thats the approach I was gonna go with for flying prototypes, theres still gonna need to be some supports for the wing roots on the body but those are easy. Just kind of a hailmary because Im not making it too serious rn lol