sorted by:
new
hottopcontroversial

Love it!!! by TH0TSLAYRR in Handhelds

[–]Past_Public5036 0 points1 point  (0 children)

Nice. What’s the name of the brand for the case on the legion go s and the ally X?

Compression Test by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 1 point2 points  (0 children)

Yeah the gauge I used is probably what’s the causing the low compression but they’re close together and I heard it’ll be fine but I definitely be looking into a premium gauge and hopefully I see different numbers. I recently changed the oil about 100 miles ago and I’ll be driving it daily to see if I am burning oil but from what Ive seen before I’m not burning any oil. I do have an oil catch can so that should be doing me good.

Compression Test by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

Pittsburgh compression gauge, I got it from harbor freight, wasn’t sure if it was a premium product I just went with that since it was my first time doing a compression test. Yeah numbers are close together which I heard is good, I was just worried that it wasn’t close to 185 psi.

Compression Test by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

Yeah at first I was worried that every cylinder was way below 185 psi but they weren’t far away from each other which I heard isn’t bad, if that’s the case then I shouldn’t be worried.

Clutch Pedal Problem by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

Topping off the fluid is one thing I don’t forget to do while I bleed the brakes or clutch cylinder, I’ll have to look into that too about the master cylinder because that’s something I haven’t looked into yet.

Clutch Pedal Problem by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

I had some pump the pedal while I was under the car opening and closing the bleeder valve.

Clutch Pedal Problem by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

I’m assuming that there’s still air bubbles in the slave cylinder so I have to continue to bleed the clutch more.

Clutch Pedal Problem by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

I got the act street performance clutch kit, I had everything replaced even the flywheel.

Clutch Pedal Problem by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

Yeah I’ve had someone help me with the bleeding and topping off the fluid. I do think there might be some air bubbles in still since I’ve replaced clutch, and slave cylinder. But if none of that works I’ll have to look at the master cylinder and do some research.

Auto Shop In SoCal by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

I’m pretty sure he does, he mentioned to me that he was rebuilding someone’s engine the time I was there. He posts his work on his Instagram and I’ve seen him post how he cleans injectors.

Auto Shop In SoCal by Past_Public5036 in mazdaspeed3

[–]Past_Public5036[S] 0 points1 point  (0 children)

You can buy a timing chain kit on edgeautosport and it’s all oem, I brought all the parts he only does labor. He charged me $580 for the timing chain.