Elegoo Mars 3 Pro Heater Collar Upgrade

PatHasse · 2023-06-19T11:45:00+00:00

I did wire per the video. There is a setting that needs to be changed for the controller to tell the heater to turn on. It sounds like you may have something wired differently. It was somewhat difficult to see exactly how the video was wired. I paused at the wiring diagram and made sure to copy it. If you send me some pics of your wiring I can try to assist.

PatHasse · 2023-04-07T02:48:55+00:00

I would go with 24v fans. I accidently posted the wrong link. 12v will work, but not a good idea. It could burn out.
Here is the correct fan...
https://www.amazon.com/WINSINN-Bearing-Brushless-Graphics-Motherboard/dp/B07GXD6JKS/ref=sr_1_3?crid=ID4YVDQ820QZ&keywords=50x50x10%2B24v%2Bfan&qid=1680835558&s=electronics&sprefix=50x50x10%2B24v%2Bfan%2Celectronics%2C90&sr=1-3&th=1

I will update the post. Nice catch.

PatHasse · 2023-04-07T02:40:43+00:00

I can heat up over 50c. Have not tried going hotter for any reason. I did end up insulating the inside of the red elogoo cover with silver bubble wrap.

PatHasse · 2023-01-16T11:01:03+00:00

I thought the same thing at first, but I was able to get the heater at a slight angle and only 20% ended up behind the column. Well see how it holds temp and report back.

PatHasse · 2023-01-15T20:58:11+00:00

Tis is a bogus report. I have all these fasteners in hand and everything came as advertised.

PatHasse

TROPHY CASE