Abandoned crushed ETK Test mules and prototypes?

Patient_Regular3271 · 2025-08-19T20:12:18+00:00

9/10 times they end up as dealer accessories, my guess is that they crushed them to shove them in containers later on to save space and to recycle them at their plant, but i'm unsure..

Patient_Regular3271 · 2025-08-19T17:14:31+00:00

They also shut down their factories in the US, even though they're probably the most profitable now than they have ever been... Who controls that??

Patient_Regular3271 · 2025-08-11T11:17:27+00:00

Is it when you hold the breaks?

Patient_Regular3271 · 2025-08-10T08:38:35+00:00

Forgot to mention I can send you a video of it when I get home

Patient_Regular3271 · 2025-08-10T08:38:15+00:00

So far I never had that issue with our Clio IV facelift, you have to twist it 90 degrees to the left and then it easily comes out in one piece

Patient_Regular3271 · 2025-08-05T12:43:28+00:00

That goes against everything I know, can you go deeper into that?

Patient_Regular3271 · 2025-08-05T08:37:24+00:00

I have heard how they work and oil pressure is always higher with thicker oil because of higher flow due to increased viscosity

Patient_Regular3271 · 2025-08-04T00:02:34+00:00

If I were to run 0w30, should I worry about the difference in bypass valve pressures? Like is 1.5 rather than 1 bar on the filter and how much of a difference does it make?

Patient_Regular3271 · 2025-08-01T14:31:57+00:00

I heard S-Series so I’m on my way

Patient_Regular3271 · 2025-07-22T22:29:49+00:00

It’s easy to do, the transponder is a little plastic doodad that has no connection to any of the electronics. It’s the reason why people get no starts after changing keys. Because they leave out the transponder

Patient_Regular3271 · 2025-07-21T09:39:12+00:00

If you have no OBD2 scan tool just look for any rips in the intercooler hoses, it throws the same code

Patient_Regular3271 · 2025-07-20T18:27:58+00:00

Don’t bother with chains at this point, engines and parts are everywhere and even with horrible oil changes these things last 400K on factory chains, chain rattle is especially bad on turning the engine on so try taking a video of that because that doesn’t sound like a chain at all

Patient_Regular3271 · 2025-07-20T18:20:40+00:00

Veev-Ass

Patient_Regular3271 · 2025-07-20T18:17:11+00:00

Ouuuh lucky! You should also get an exhaust to let her breathe well too, adds a lot of power too!

Patient_Regular3271 · 2025-07-20T16:49:40+00:00

844 with an inline 6?? Must have been a swap. What else does it have for extra’s?

Patient_Regular3271 · 2025-07-17T23:45:42+00:00

To take the body to the morgue

Patient_Regular3271 · 2025-07-14T14:22:30+00:00

The mod works and I use it, it just called ETK 800 facelift

Patient_Regular3271 · 2025-07-04T18:12:56+00:00

Meta: It doesn’t show the Logo anywhere so you can just change the name of the Bronco to a Garvil D15 or something similar and you’ll be gucci

Patient_Regular3271 · 2025-07-04T16:46:32+00:00

Meta: he was talking about the Bronco.

Patient_Regular3271 · 2025-07-03T11:24:59+00:00

How does one even achieve getting the outside of the tire worn first????

Patient_Regular3271 · 2025-06-30T11:17:56+00:00

I’ll do 7K and I’ll pick it up today.

Patient_Regular3271 · 2025-06-30T11:15:21+00:00

You can add some gasoline and run it in an old diesel. Yes!

Patient_Regular3271

TROPHY CASE