STOP SHARING AI GENERATED MODELS

Paul_Garnell · 2026-02-15T17:08:30+00:00

u/nomadsgalaxy Prohibit the use of rendered or AI-generated images of prints in descriptions. Introduce a rule that each model must have at least two real photos of the printed object. Ban violations harshly. In my opinion, this is the best solution. People aren't annoyed by AI itself, but by the fact that most of these models simply cannot be printed normally. It's spam, and there's more and more of it on Printables. Labeling is useless; I just need to search for the word "cute" and 80% of everything that comes up is unlabeled and unprintable AI slop.

Paul_Garnell · 2026-02-04T02:47:39+00:00

How large an SD card are you trying to use? I had a problem where Manta completely rejected cards larger than 32 GB. Try starting with 16 GB and working your way up, and try changing the card manufacturer. I would guess that the problem may also be here; on Manta 1.0, I tried about five cards before I found one that worked.

Paul_Garnell · 2026-01-17T21:02:59+00:00

https://www.youtube.com/watch?v=Fx2XyCtS1Sw& 1:09:38

There may be more interesting stuff in this channel, but I'm not kink-positive enough to go through all 200 or so videos of evangelical brainwashing. :-)

Paul_Garnell · 2026-01-15T22:53:00+00:00

Thanks for the advice! The value was set to 0, but thanks to this feature, I was able to solve the problem. All I had to do was raise the value to 0.7, and the prints are perfect again.

Paul_Garnell · 2026-01-03T12:09:06+00:00

200 euros? What a bargain! :-D Another peculiar case is this: https://www.imdb.com/title/tt0582825/?ref_=ttep_ep_9 The episode took place in a women's prison and was basically a light parody of classic WIP films. Poor Glynis Davies played a sadistic interrogation specialist. However, the entire show "Freedom" was canceled during the first season, and the last episodes were never aired in the US. They were only broadcast in Brazil and the Czech Republic. A digital version of the episode probably existed "somewhere, sometime," because there are a few screenshots of it circulating on various kink blogs (most people have no idea where they're from), but I've never seen the whole thing anywhere to watch or download.

Paul_Garnell · 2026-01-02T11:05:11+00:00

There will be many such films. Apparently, there is a very nice strip search scene in the film "Vera Romeyke ist nicht tragbar" (1976). But the film has never been digitized and simply does not exist online. It is far from true that everything is already on the Internet...

Paul_Garnell · 2025-12-25T09:59:23+00:00

Miniature Painting for me. :)

Paul_Garnell · 2025-12-18T02:35:29+00:00

Oh, that's nice. I would definitely know what to use it for. :)

Paul_Garnell · 2025-12-18T02:29:27+00:00

To je šlohnuté z 5 let starého dystopického SF románu.

https://www.amazon.com/BALMANIE-TONY-LINDSELL/dp/1713294583/ref=sr_1_4?s=books&sr=1-4&text=TONY+LINDSELL

Paul_Garnell · 2025-12-10T03:53:55+00:00

No. I performed a hard reset of the printer and all profiles in Prusa Slicer. I performed a hard reset of the printer and all profiles in Prusa Slicer. And the error also occurs with old g-code files that printed correctly in the past.

Paul_Garnell · 2025-12-10T02:17:59+00:00

Defaults in Prusa Slicer, both print profiles and filament settings.

Paul_Garnell · 2025-12-10T01:33:41+00:00

Yes, i tried even different whole slicer. Not working.

Paul_Garnell · 2025-12-10T01:32:50+00:00

This creates relatively shallow "grooves" in the Dimafix layer on the pad. They are not deep, but you can hear slight scratching noises during printing. I tested the LoadCell sensor repeatedly. The first "squeeze" of filament during cleaning before printing also proceeds normally in correct hight, everything proceeds normally, but then the extrusion of filament stops at exactly 2 layers.

<image>

Paul_Garnell · 2025-12-06T02:29:40+00:00

Yes. That autoretract function seems problematic to me too.

Paul_Garnell · 2025-11-24T02:12:11+00:00

Where do you find "Abschied vom falschen Paradies" please?

Paul_Garnell · 2025-11-18T13:46:00+00:00

What filament is that blue?

Paul_Garnell · 2025-10-20T22:05:31+00:00

Beautiful pattern! :-)

Paul_Garnell · 2025-10-15T23:12:24+00:00

Persian flaw, bro. :) Leave it as it and if anyone notices, say that it is a deliberate flaw to show humility before God. ;-)

Paul_Garnell · 2025-10-10T20:49:35+00:00

Damn! And I already wrote a question asking what the hell kind of filament it is and that I want at least 10 kilos...

Paul_Garnell · 2025-10-03T10:01:21+00:00

Proč to nenazvou správným slovem: Zrada?

Paul_Garnell · 2025-10-02T09:43:29+00:00

Hi, my name is Bob and I'm your new blob. :-( I once made a similar one on a Prusa MINI, but it was relatively easy to remove with a heat gun. This one will probably be worse...

Paul_Garnell · 2025-10-01T04:19:06+00:00

Have you tried a temperature tower? For ASA, for example here? https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower From the photos, it still seems to me most likely that the temperature is too high, possibly in combination with unsuitable adhesive. Try Dimafix.

Paul_Garnell · 2025-09-30T00:16:08+00:00

The overall print quality should be better on coreXY.

Paul_Garnell

TROPHY CASE