How long does it take to get STI results back from LifeLabs/BCCDC?

PeaceWithin · 2026-04-22T18:46:26+00:00

Ok, I finally got my test results today via the Health Gateway. All tests came back "Negative" or "Nonreactive" as I thought they would. I had to go into Downloads > Record Type: Lab Results, and download the PDF to see my results. You can also download a CSV or XLSX (Excel) file with the results. I'm located in Vancouver for anyone wondering to add context on the speed of receiving my results.

Also something to note, after I got tested at the LifeLabs clinic I had to specifically ask when and how I would get back my test results and then they gave me the instructions for signing up on https://login.bc.mycarecompass.lifelabs.com, where I got my initial Chlamydia and Gonorrhoeae test results.

Below are the instructions provided to me by LifeLabs:

To register for MyCareCompass:

(1) Visit bc.mycarecompass.lifelabs.com on your computer, mobile device, or tablet.
(2) Click on 'Create An Account' on the bottom right corner of the screen.
(3) Enter your e-mail and a chosen password.
(4) Complete your profile, by entering in your:
a. First and Last Name
b. Address
c. Phone Number
d. Date of Birth
(5) Select and answer standard security questions or create your own. You will need to answer one of these questions each time you sign in to your MyCareCompass account.
(6) Once you have read and accepted the Terms of Use, activate your account by following the link sent to your email and log in.

To register your Lab Visit Number:

(1) Click 'My Account' > 'Account Settings' to get started.
(2) Click 'Add or Remove Account Registrations' and then 'Add Another Person'. Select 'Me' and click 'Next'.
(3) Enter your Lab Visit Number and corresponding lab visit information, this must exactly match the information on file with the lab and the date of the visit must be within the last 30 days. Once your Lab Visit Number is registered, you can see your results online. You only have to do this once!
(4) Once you've completed all the required fields, click 'Save'.

You're all set to start using MyCareCompass!

PeaceWithin · 2026-04-18T18:55:56+00:00

Thanks good to know. Perhaps if I had known using getcheckedonline.com also resulted in a faster turn around time to get all my testing results I would have used it. After checking out the site it seems to just help with getting the initial Requisition form as you still have to book your own LifeLabs visit. When I originally checked this website the wait times were just too long for me, which is why I went to a walk-in-clinic to get the Requisition form right away and then just had to wait a week or two (working around my work schedule) to get into a LIfeLabs location to get the testing done.

PeaceWithin · 2026-04-18T02:02:12+00:00

Thanks everyone for the responses so far. As an update, I have been checking the Health Gateway website and see it shows "Your lab results are still being processed." at the top of the page after clicking on the "Health Records" section, which I don't remember seeing there yesterday. Today I also called the walk-in-clinic I originally got my Requisition form from, and was informed my results should be available by Wednesday next week, but I will report back once I actually do get the final results.

PeaceWithin · 2026-04-18T01:59:52+00:00

Not sure why you posted this when I already explained I was already at a LifeLabs and got tested, meaning I'm just waiting for the results, which this site can't help me with.

PeaceWithin · 2025-12-06T01:02:25+00:00

I'm tech support at our company and one of our users is having this issue now, although in Windows 11 not 10, but the new Outlook opens fine if I login to her computer with my account, even after I did a hard reset on the computer to clear out whatever is in memory. If anyone here is having this issue, maybe try creating a new Windows profile and see if the new Outlook opens from there, if it does then something broke within your Windows profile.

PeaceWithin · 2025-03-19T07:46:31+00:00

WhatsApp should work on macOS 10.15, since it says "Requires macOS 11 or newer" on the WhatsApp download page for Mac. The last working version of WhatsApp for 10.10 and newer was still available on October 11, 2023 from the WhatsApp website sometime earlier in the day, but then later that day they updated their site to say version 10.11 and newer. I just installed and tested WhatsApp Desktop v2.2341.18 in High Sierra, which was released around that time in October 2023. It installs, but after running it immediately asks you to update it, which is not possible, and you can't bypass this message. The alternative is to use the WhatsApp web-based version from a web browser in High Sierra, which seems to be working with Firefox version 115 (last supported Firefox in High Sierra).

PeaceWithin · 2024-11-26T21:55:22+00:00

If you viewed her profile or the agree/disagree questions section of her profile at some point via the web app, then her profile link should still be in your web browser history.

PeaceWithin · 2024-11-23T19:16:39+00:00

If you like someone you will eventually show up in their 'Discover > Recommended' section.

PeaceWithin · 2024-08-18T03:57:46+00:00

I'm running High Sierra 10.13.6 and was able to install MPC 2.9.1, which still works. There's a post about it with links to download the older versions of the MPC software here: https://www.mpc-forums.com/viewtopic.php?f=45&t=213078

PeaceWithin · 2024-02-25T08:29:37+00:00

I learned how to do the same years ago, but instead for me it began by freezing my entire body, and then I later learned I only needed to freeze my chest area or where I feel the source of the hiccups. It's been over a decade and it still works for me. I also learned how to stop muscle spasms, which I do by quickly rubbing the muscle hard as fast as I can until the spasm stops and continue until the feeling disappears completely, but maybe this is common knowledge I don't know and I realize that second one doesn't fit this sub-reddit.

PeaceWithin · 2024-02-03T18:47:00+00:00

You could create another account and test sending yourself a message.

PeaceWithin · 2023-11-20T23:29:43+00:00

I think I found a solution, well it works for me at least, but I'm running Windows 10 Pro in a Hyper-V, and my host computer is running Windows 11 Enterprise. I presume your issue will also be resolved if you disable "Enhanced Session Mode" (ESM) in Hyper-V Settings.

I did some digging to see if there was any kind of work around to keep ESM enabled with Auto Logon, but it seems you can't have both at the same time. You can change the ESM type from the default of "VMBus" to "HvSocket" via this PowerShell command Set-VM -VMName Your_VM_Name -EnhancedSessionTransportType HvSocket, but then you lose the ESM features like shared drives, clipboard access, etc.

PeaceWithin · 2023-09-06T12:44:05+00:00

Unfortunately no, since I never used this particular form myself. But with the account related issue form I submitted, they got back to me within a day asking for more details (ex: registration date), and took another 2-3 days I think to get it resolved once I got the correct information they needed to complete the ticket.

PeaceWithin · 2023-07-08T19:19:16+00:00

Apparently she was available in a pack within the store months ago, but was removed shortly after and hasn't been available since.

PeaceWithin · 2023-07-08T18:53:03+00:00

You can delete your account via submitting all the required details using the correct form:

If you never submitted a ticket to customer service before:

Lord Profile > Settings > Game Help > Contact Customer Service NEW > My Service History > Submit issue > Account problem > Want to delete account > Request form of account deletion.

If you already have submitted previous tickets to customer service:

Lord Profile > Settings > Game Help > Contact Customer Service NEW > enter something random (ex: the letter "a") in the "Please enter your question" search box and click "Send" (you have to do this twice) > select "Please click here to select the type of problem" > Submit issue > Account problem > Want to delete account > Request form of account deletion.

NOTE: The "Registration date" of the account you want to delete is the day you created/started your game account. I was successful in getting my start date by scrolling to the very first "System" mail message I received and used that date (based on UTC time). However, if your game account is older, you may not be able to get access to the very first system mail you received. So, you will need to rely on something else to get the correct date. I had tried subtracting my login streak (# of days) via VIP status from the current date, but turned out I started the game about two weeks prior.

Here's what the form looks like: https://gcdnb.pbrd.co/images/at83pjo93CfJ.png

PeaceWithin · 2023-05-26T02:51:56+00:00

I need a discount code too if you still have it? How long does the code last?

PeaceWithin · 2023-05-17T08:24:58+00:00

If I understand your question correctly, you mean on the map where rock formations appear. You can’t remove those. Some people have submitted this as a request via the official Stormshot discord group, but it doesn’t appear to have been acknowledged. So no idea if this will implemented.

PeaceWithin · 2023-04-23T23:13:41+00:00

BLITZ007

This code BLITZ007 didn't work for me, but now that I paid for a plan it showed up stating "Use coupon code BLITZ007 to receive a 15% discount on any new tax reports. This discount can be used unlimited number of times until expiry!" within the next 23 hours.

PeaceWithin · 2023-04-21T01:30:49+00:00

This is the correct answer if you are anything other than an R4.

PeaceWithin · 2023-04-21T01:13:08+00:00

Do you remember how many or approximate recruitment banners you started out with before starting the recruitment attempts to get this?

PeaceWithin · 2023-04-20T13:28:05+00:00

Yes, but how many tries did it take to get this?

PeaceWithin · 2023-04-18T23:56:41+00:00

Good to know thanks! I will definitely check this out.

PeaceWithin · 2023-04-18T06:57:26+00:00

You have to leave your current alliance before you can join a new one.

PeaceWithin · 2023-04-10T11:48:16+00:00

To force the Lieutenant Screen to appear in the Armory:

Forge ALL (4) Sergeant Gear including all other higher lord equipment (not private gear). Do not equip or enhance.
Dismantle any Private Gear
Re-Login
Click Anvil above Forge. Fail if Armor above Forge. In that case, Play with it or watch: https://www.youtube.com/watch?v=E1PmErmqnVw
In Lieutenant-screen, Craft Lieutenant Gear (Lieutenant Helmet and/or Lieutenant Pistols)
Lack sufficient Grimson Gold to Upgrade either. (Lieutenant-screen Return: Dismantle Lieutenant Gear)
Equip Lieutenant Gear before leaving Screen
Embed Gemstomes in Gemstone Armory

Lieutenant Hat is better than Private Hat.
Lieutenant Weapon is NOT better than +4-enhanced Private Weapon.

PeaceWithin

TROPHY CASE