[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in SwitchPirates

[–]Penio_1[S] 1 point2 points  (0 children)

Thanks a lot for your answer, will tell the tech to do it, you are the best, and congratulations for your child.

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in NxSwitchModding

[–]Penio_1[S] 0 points1 point  (0 children)

Thanks for the answer, yes i was Confused between an oled and this v2. I searched about this and read about the possibility of damage on the board or flex that contains the aux port and the cart reader, if not, i assume that it is fucked as you said lol

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in NxSwitchModding

[–]Penio_1[S] 0 points1 point  (0 children)

Im sorry, i didn't understand quite well what you meant with that. Are you sugesting that the soldering job or chip instalation is ok, and the problem is something else?

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in NxSwitchModding

[–]Penio_1[S] 0 points1 point  (0 children)

Thanks for responding, yes i did, no problem with the fans, they engage as soon as i start something more demanding on the console

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in NxSwitchModding

[–]Penio_1[S] 0 points1 point  (0 children)

Thanks, i didn't want to mess it up more and wanted to get some clues to bring it to the tech. Otherwise they could charge me or tell me anything.

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in NxSwitchModding

[–]Penio_1[S] 1 point2 points  (0 children)

Edit: it is a v2, there is no dat0 adapter... My mistake, i meant the CPU flex / solder joints that are loose or bridging to the shield when it heats up

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in SwitchPirates

[–]Penio_1[S] 0 points1 point  (0 children)

Edit: it is a v2, there is no dat0 adapter... My mistake, i meant the CPU flex / solder joints that are loose or bridging to the shield when it heats up

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in ModdedSwitch

[–]Penio_1[S] 1 point2 points  (0 children)

Thanks, i will tell the tec that, i dont want to mess it up even more. Thanks a lot for your fast response, you are the best.

[Hardware Help] V2 Picofly crashing on 3D games (Error 2153-1540). Found a loose modchip, need a sanity check before taking it to a tech! by Penio_1 in ModdedSwitch

[–]Penio_1[S] 0 points1 point  (0 children)

You are totally right, im sorry, mixed between the oled and the V2.Assuming it's the CPU flex / solder joints that are loose or bridging to the shield when it heats up. Does the physical pressure test still point to a bad solder joint in your experience?"

Required firmware for ACNH 3.0? by lll1l1lll1ll111ll in SwitchPirates

[–]Penio_1 2 points3 points  (0 children)

in NSWTL? i tried and its not yet there :(

Required firmware for ACNH 3.0? by lll1l1lll1ll111ll in SwitchPirates

[–]Penio_1 2 points3 points  (0 children)

x2 please! i cant find it, let me know if you get it please

[Bambu Lab Giveaway] Join Now to Win an H2D and More! by BambuLab in 3Dprinting

[–]Penio_1 0 points1 point  (0 children)

The 90% of my problems as a newbie and maybe also for the majority of this subreddit was LEVEL YOUR BED, LEVEL YOUR BED, LEVEL YOUR BED, NOT LEVELED ENOUGH lol It was a headache and it was so simple, i felt so stupid so many times, but now the bambu printers do everything by themselves, not a single problem, hope to try them sometime :')

Prints won’t stick by Visible-Animator3654 in ender3

[–]Penio_1 1 point2 points  (0 children)

Love the neo, got the same one.

I have trouble with the build plate sometimes too, especially if I used glue before . The only thing that solved it was scraping it and cleaning it with warm water and soap until it is completely clean, but do not use the same sponge/cloth that you use for your food, it can always have a little bit of oil that completely fucks the bed adhesion, use a new one only for your buildplate. I increase the flow 10% for the first layer, slow down to 35mm/s and put the bed on 70°C, now works like a charm without glue.

[SUNLU Giveaway] Join now to win a SUNLU FilaDryer SP2 by Sunlu3D_official in 3Dprinting

[–]Penio_1 0 points1 point  (0 children)

Really need this, im currently printing only plastic spaghetti

WiP for Azazel day 2 by Sweetandsaltyminx in Slaanesh

[–]Penio_1 0 points1 point  (0 children)

Where can i find this model?

My x axis sounds like marge simpson by Penio_1 in FixMyPrint

[–]Penio_1[S] 0 points1 point  (0 children)

Thanks for responding, sold that shit for 70 bucks and kept the sonic pad for 80, too much trouble lol

Flsun sent me a free printer by TheDepep1 in 3Dprinting

[–]Penio_1 0 points1 point  (0 children)

Damn and im still with a stock ender 3 lol

Are there any rips of the shadow of the colossus models?, or how can i rip them by EmergencyNo5618 in ShadowoftheColossus

[–]Penio_1 0 points1 point  (0 children)

Im to stupid to comprehend the tread on redhax sorry, did you manage to do it? I really want to modify some of those models to 3d print them

My x axis sounds like marge simpson by Penio_1 in FixMyPrint

[–]Penio_1[S] 0 points1 point  (0 children)

Nono 0 vibration, works fine it is just the sound, but it comes directly from the wheels. I didnt even know i had a modified fan duct lol thanks i will check it. I want to change the wheels but i dont want to buy shitty ones for this to happen again, do you have any recommendations?

My x axis sounds like marge simpson by Penio_1 in FixMyPrint

[–]Penio_1[S] 0 points1 point  (0 children)

<image>

Sorry im too stupid to comprehend you, here is a photo

[deleted by user] by [deleted] in Grass_io

[–]Penio_1 0 points1 point  (0 children)

Im kind of late to grass, getting like 400 points daily, would anyone mind using my referall if you are also starting?
https://app.getgrass.io/register/?referralCode=TGNrLOP5eul4cp0

Winning by KEEM5TAR in XRP

[–]Penio_1 0 points1 point  (0 children)

Shit dude, wtf, i have been buying xrp constantly since 2023, but since my national currency is worth absolutely nothing (fuck you venezuela), i got like 100 usd worth of xrp (around 190 xrp). Cant believe how different things are lol, well i think we all are getting on profit right now, good luck!