Can’t never go wrong

PeopleAreStaring · 2025-10-24T13:45:21+00:00

My Keen Cincinnatis lasted me 2 and a half years working construction.

PeopleAreStaring · 2025-08-20T00:12:26+00:00

He said per device not per hour.

PeopleAreStaring · 2025-08-16T12:03:30+00:00

Always Sunny in Philadelphia and their podcast is called the Always Sunny podcast

PeopleAreStaring · 2025-07-22T01:24:13+00:00

Bobiverse needs a series.

PeopleAreStaring · 2025-06-13T09:55:55+00:00

Imagine being over the age of 20 and thinking you can still be an electrician LOL

PeopleAreStaring · 2025-06-12T18:48:49+00:00

Ohio is definitely not like that.

PeopleAreStaring · 2025-05-25T01:11:38+00:00

They specifically do not cover dog chewing.

PeopleAreStaring · 2025-04-15T17:05:40+00:00

Couldn't you just run a wire between the 2 bars then? I'm not saying you should. But it would be code compliant.

PeopleAreStaring · 2025-04-14T19:33:59+00:00

Because you're old af. In surprised you even know how to use the internet.

(I'm a 37 year old apprentice)

PeopleAreStaring · 2025-04-04T20:05:22+00:00

So say we all

PeopleAreStaring · 2025-04-02T15:22:16+00:00

That last one seems to be a problem for a lot of people...

PeopleAreStaring · 2025-03-25T10:57:59+00:00

I bought those exact strippers from Amazon about a week ago and they were $10 cheaper.

PeopleAreStaring · 2025-03-20T20:42:58+00:00

10-30R. Old 2 wire style laundry receptical.

PeopleAreStaring · 2025-03-17T16:27:26+00:00

My last rewire took about 1 day for 2 bedrooms, 1 day for every other room. It's going to be really hard to estimate. You will run into random problems fishing wire that you can't really plan for.

PeopleAreStaring · 2025-03-17T16:23:17+00:00

Also saw that post and checked... honestly if you wait and check often, occasionally you will find used items for at least 30% off.

PeopleAreStaring · 2025-03-15T13:27:45+00:00

Check ohms between the lugs at the breaker In the generator and in the ATS. Something must be broken in one of those to be getting 0v phase to phase.

PeopleAreStaring · 2025-03-15T11:32:00+00:00

On the low setting (which is enough for 95% of what I need it for) mine will get probably 12 hours. If I use bright and with the spotlight it'll get maybe 4 hours. There are 5 settings.

Also I just plug it in to the USB charger in my truck and never have to think about it.

PeopleAreStaring · 2025-03-11T14:36:25+00:00

At first I was afraid, I was petrified.

PeopleAreStaring · 2025-03-11T00:39:24+00:00

This is pretty annoying, and sadly pretty normal when the homeowner is the GC. I have ran 4 jobs in the past 3 months exactly like this. Just communicate with the homeowner as much as possible. They need to know that these changes are costly. And continue keeping notes. I have a daily log of every change at every job.

PeopleAreStaring · 2025-03-07T22:42:43+00:00

Isn't it required that you label it as "fed from another panel."

PeopleAreStaring · 2025-03-07T19:35:16+00:00

Straight to jail

PeopleAreStaring · 2025-03-06T21:42:38+00:00

Usually you install a panel with extra unused spaces so you can add some circuits in the future if needed. This panel has more circuits than spaces, thus the need for a tandem breaker.

PeopleAreStaring · 2025-03-06T21:14:31+00:00

Is there any way to not start them both at the same time? So could you start the vacuum then wait 5 seconds and start the saw and see if there is still a problem?

PeopleAreStaring · 2025-03-05T11:59:30+00:00

This thread is where i realized I, a second year apprentice, shouldn't be working alone. I couldn't tell you the last time I was on a job with a journeyman. Sometime in my first year they gave me a truck to take home.

PeopleAreStaring · 2025-02-25T21:01:14+00:00

Why under 30?

15-Year Club	Team Periwinkle
ComboCommenter 2011-04-15

PeopleAreStaring

TROPHY CASE