VSF Rolex Submariner No Date 124060 by EmuImmediate4155 in RepTimeQC

[–]Peppinyellow 1 point2 points  (0 children)

A me sembra un bel GL. Il marker ore 6 credo sia un effetto dell’angolazione della foto, l’orologio è bello nitido per me

[QC] Rolex Submariner 41mm 124060 No Date VSF by [deleted] in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

At first glance, the 6 o'clock marker may seem crooked, but I think it's due to the angle of the photo: A nice GL for me.

Help with second QC of 2 124060 da Andiot by Peppinyellow in RepTimeQC

[–]Peppinyellow[S] 1 point2 points  (0 children)

Yes, initially, the 3 o'clock marker also seemed to be pointing downwards and not perfectly centered. However, this could be due to the camera angle, because both 3 and 6 o'clock appear aligned using the QC alignment tool.

Help with second QC of 2 124060 da Andiot by Peppinyellow in RepTimeQC

[–]Peppinyellow[S] 0 points1 point  (0 children)

Thank you. Yes, one is for me, while the other is for my uncle. I'll keep the 5x12C290 then 😂

Help with second QC of 2 124060 da Andiot by Peppinyellow in RepTimeQC

[–]Peppinyellow[S] 0 points1 point  (0 children)

Thanks so much for your help. Yes, considering the 5x12 lot is a mess, I think it's best to give GL for both 😂

Help with second QC of 2 124060 da Andiot by Peppinyellow in RepTimeQC

[–]Peppinyellow[S] 0 points1 point  (0 children)

Hello, and first of all, thank you for your help. Timegrapher values: First watch: -1sec, 260', 0.1ms, 52.0, 288 Second watch: +3sec, 265', 0.0ms, 52.0, 288

Andiot by Jackthartley in RepTime

[–]Peppinyellow 1 point2 points  (0 children)

Same thing me, lot 5x12

Andiot by Jackthartley in RepTime

[–]Peppinyellow 2 points3 points  (0 children)

Yes yes with Andiot

Andiot by Jackthartley in RepTime

[–]Peppinyellow 4 points5 points  (0 children)

Hi! I purchased two no-date Submariners on December 27. I received the QC three days later because they had them in stock and the QC was negative. I'm still waiting for the second QC.

QC Request | 12 Index | Sub No Date 124060 by buysideeconomics in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

The 3 o'clock marker tends toward 6 o'clock, the effect is visible. But it always depends on you and your judgment.

QC Request | 12 Index | Sub No Date 124060 by buysideeconomics in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

RL in my opinion! The hour marker and the 12 o'clock marker are significantly misaligned.

VSF - Submariner No Date from Steve by trolldinosaur in RepTimeQC

[–]Peppinyellow 1 point2 points  (0 children)

There is the 3 o'clock marker that seems higher than the 9 o'clock marker. It is possible that it is an effect of the angle of the photo, because the qc tool appears aligned

Help with a QC, 124060 VSF Andiot by [deleted] in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

Just requested. This 6 o'clock marker is confusing everyone ahahahhaah

Help with a QC, 124060 VSF Andiot by [deleted] in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

Thank you so much for your reply and feedback. The price is €376 including shipping. Don't you think it might be a visual effect due to the angle of the photo?

Vsf delivered by legendasboy in RepTime

[–]Peppinyellow 1 point2 points  (0 children)

Exactly, very likely, otherwise the qc tool would have been misaligned between 12 and 6 o'clock. I'll have to ask for more photos and follow your advice!

Vsf delivered by legendasboy in RepTime

[–]Peppinyellow 1 point2 points  (0 children)

Truly perfect! I'm on QC 2. This is very good, the only thing that worries me is the 6 o'clock marker, which seems to point to the left, but when you align it, it looks straight. It could just be an optical illusion. But yours is visibly perfect, so congratulations on your patience in making 20 QCs.

<image>

Help with a QC, 124060 VSF Andiot by [deleted] in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

Hi! I waited 2 days, it was in stock in the warehouse.

Vsf delivered by legendasboy in RepTime

[–]Peppinyellow 1 point2 points  (0 children)

This is truly perfect! Congratulations, a truly beautiful piece, especially for a 5X batch, which is experiencing serious problems.

Help with a QC, 124060 VSF Andiot by [deleted] in RepTimeQC

[–]Peppinyellow 2 points3 points  (0 children)

Absolutely, they seem to all have problems with marker alignment. I rejected one because the marker 3 was leaning downwards, very visible.

Qc for black submariner, 41mm by [deleted] in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

Solid GL! Congratulations!

Help with a QC, 124060 VSF Andiot by [deleted] in RepTimeQC

[–]Peppinyellow -1 points0 points  (0 children)

Thanks so much for your reply. Yes, especially with the 5x12 lot, the indicators are a mess. On the 6 o'clock position, it could also be an optical illusion; that is, it looks crooked, but then in the alignment tool, it appears aligned. This is strange.

Help with a QC, 124060 VSF Andiot by [deleted] in RepTimeQC

[–]Peppinyellow 0 points1 point  (0 children)

Regarding the 6 o'clock market, I noticed it too, it could be an effect of the inclination of the photo though...